Counting matching models…
***Update*** I have uploaded versions with a smaller overall diameter. I have a SodaStream Duo and it came with one plastic bottle and one glass bottle. I wanted to have a stand for them to let them dry upside down. So I did some changes…
During printing my Enclosure often starts wobbling especially while printing full surfaces. So I designed this support piece to stiffen the tables legs. Instead of most existing designes I wanted to optinize the approach for 3D printing.…
A spatula to mix paint, use it for baking or any other use you can imagine. Please remember that the printed spatula may not be suited for certain applications depending on the used filament or printig technique. ***german version*** Ein…
***Update*** I have uploaded a version of the design with a smaller overall diameter This waterbottle drying stand works just like my other designs, but theis one is adjusted to the glass waterbottle from waterdrop. It has a large base…
***german version below*** This skadis holder for nextruder nozzles can hold up to seven nozzles. 4 inside of their original containers and 3 without them. It can be printed without support, but some can be added under the bridging of the…
***german version below*** I really liked the versatility and simplicity of the original spool holder design od the Prusa Lack enclosure. But it had two disadvantages. It was quite noisy and it streched flex filament quite heavily while…
I found this model on Thingiverse https://www.thingiverse.com/thing:3771770 Tthe sword would not print as good as I wanted it. So I added a little pillar in the back of the sword to support it. It now works very well. You should use…
I wanted to recreate the minimalistic design of the egg trays that came with my Bosch refrigerator.The original can hold four eggs, but I also created versions for six and ten eggs. Update: There are now two versions of the design.…
A nice little print to stop your Thermos drinking bottle from tipping over. Ein kompakter Trockenaufsteller für eine Thermos TC Flasche (1 Liter), der das Umfallen währen des Trocknens verhindert.
I have a small collection of true fruits bottles and I reuse them regularly. I wanted to have a drying stand for them just like the one for the Soda Stream bottles I designed. So I adapted the design to fit the true fruits bottles. There…
I bought dividers for my storage boxes but they fitted quite loosely. So I designed this stabilizer to put on the crossing dividers so they stay at a 90° angle. At 100% this model fits for dividers with 3mm of strenth. I recomment…
*** german version below *** I burned through quite a few printed nozzle wrenches so far, so I decided to use a standard 7mm socket and just give it a nice handle. This nozzle wrench uses a ¼'' (6,3mm) to 7mm socket. This little design…
Please note that these connectors are only meant to align Eket shelves, not hold their weight. The weight they can take is heavily dependent on the used material and settigns. I do not take responability for the use of these connectors! I…
Use double-sided tape to stick it to a wall or fridge. It is easy to print without supports and can be used in many ways. Der halter kann mit doppelseitigem Klebeband an einer Wand oder einem Kühlscchrank befestigt werden. Er ist einfach…
To protect the strawberrys in the planter pots against hungry birds with a bird protection net I designed this stick, to keep the net above the plants. The stick has a length of 28cm. It can be printed by positioning it diagonaly on the…
I wanted to use the lighting of a Herrnhuter Stern (Herrnhuter Star) for the moon lamp I printed but the opening in the stand was too big. So I designed this simple adapter rin, which can just be presst inside of it. The LED (…
With this clamp I was able to attach a power strip to my desk. Now I have the switch in reach to cut the power when my devices are not in use. It is a lot easier to use my phone charger and to plug new devices in and unplug them. The…
A model to put a magnet inside. The magnet used is 18mm in diameter and 5mm in hight. There is an enclosed version and an open one. For the first you need a print stop to insert the magnet, in the second one you glue the magnet in place…
I designed this ring display stand to display the special ring seen in the first picture. But it works with normal rings just as well. The original works for rings with an outer diameter of 30mm and slightly less. It can be scaled to fit…
To prevent forgetting the clamp on the heating block, I added an extension to the side of the clamp. Now the print fan door can't close. Damit die Klammer nicht mehr so leicht am Heizblock vergessen werden kann, hat dieser Remix eine…
I wanted to protect the strawberrys I planted in a box with a net against birds. I designed this arch for the net so the birds can't reach the strawberrys through the net and the plants dont't have to carry the weight of the net. The arch…
I wanted to have feet made from Flex material under the bottom table of my Ikea Lack enclosure. So I designed this very simple yet effective model. Please note that the printig settings differ greatly for different types of Flex materials.
I had the Idea of removing the LCD screen from inside of my enclosure and attaching it to the Lack table. So I designed this plate to hold it. You need four M3x18 screws, wich you can take from the spare parts of your Prusa Printer. The…
I couldn't find the magnets I would have needed for my Lack enclosure door handles. So I designed this door handle, wich is to be used with a pair of magnetic catchers. This model is designed to work with the 8x14mm magnetic catchers by…
*** german version below *** I designed this holder to store my CNC Kitchen soldering iron tips to use for threaded inserts on my skadis wall. This works with the AP 2 tips. Printing this is quite simple, i placed supports under the…
I designed this shelf hook to store extension cords and bags, but there are nearly endless possibilities for its use. It schould be able to withstand a considerable load, especially when printed in ABS or ASA but it is important not to…
This design was heavily influenced by the fencing weapon tester by Yafra7, but I wanted to implement some changes to make it easier to print, hold the components in place securely and to fit the components available to me. the electronics…
***deutsche Version unten*** I really liked the original yarn spinner, but I had two problems with it. First, the ball of yarn was to tight to stick it on the holder. So I adapted th espindle to take an old knitting needle with a diameter…
A stand fot your toothpaste tubes. Version one is for one small and one large tube, version two for two large ones. The large diameter is for tubes of a maimum diameter of 29mm and the small one for tubes smaller than 25mm. Ein Ständer…
I needed new bench dogs for my Black and Decker Workmate that were compatible with the original ones. The model from Thingiverse was good, but not easy to print, and the plug was too small, so the part didn’t fit securely enough. So I…
The plug of my IKEA Bathroom Sink stopped the drain a bit too well. It kegt closing even if not intended. So I designed this littke stand for it. Der Stöpsel in meinem IKEA Waschbecken schloss den Abfluss immer wieder von alleine, also…
***german version below*** I wanted to have the box with my clothes pegs right at the clothes horse because I had nowhere to put it except the floor. So I designed this hanger which fits fpr clothes horses wirth a tube diameter for the…
Based on the original flat jaws I made another pair to hold a small whetstone I use to sharpen small blades and knifes. They hold the stone firmly while holding it exactly parallel above the jaws. And there is no chance of damaging the…
These are all currently available results.
