Counting matching models…
Added 25mm lift to better clear the PTFE tube whilst retaining the sliding design of SHaDoW6's original The 14mm internal recess allows fitting of LED strip Locating pins make for a tight fit and stop rattles I'm guessing you could…
Print cup side upwards to use minimal supports. I'd recommend 3 walls and at least 20% infill for strength. Get yourself 4x 2 yellow dot squashballs (these have the best damping properties) and simply jam them in to hugely reduce noise…
Title says it all really: it's Gridfinity for Sortainer! CHANGELOG: 04 Feb 2024 Added single part and 4 part split files
I gave my robot vacuum some eyes with the hope that he wouldn't bump into stuff so much. Didn't work, but they look cool. Please post makes if you try these on other home appliances.
Direct from factory, the K1 Max bed level is awful and the official method for levelling (bottom cover off, reset z-stepper belts) is both cumbersome and inaccurate. I swapped out the stock bolts and spacers and fitted manual adjustment…
Will mount to a 75x75mm VESA plate found on most monitor arms. Cutouts for 6mm x M4 threaded heat-set inserts and 12x12mm square rubber feet. 3 models with different sized front lip: 10mm - Tablets 12mm - Ultrabooks and other thin laptops…
Simple desk stand for all the mouse enthusiasts. Keep your favourite peripherals within easy reach and your desk nice and tidy!
Clean display stand for this amazing little machine
CHANGELOG: 26 Mar 2024: Added standard sized cutouts for 6x2mm magnets to desk stand (requested)
Replaces the flimsy clip-on angle stand that is bundled with the otherwise excellent Loupedeck Live. Lifts the unit to a more ergonomic angle of 40 degrees and has a channel guide to hide the USB-C cable. Will also fit the Razer Stream…
Now I can have my volume & gain controls within easy reach, and no headphone and mic cables laying on the desk! Mounting is fine with 3M VHB tape, or I've provided 4x screw mount holes for no8 countersunk wood screws. Mount the bracket to…
Three versions made to hold 5x standard 330ml (66 x 115mm), 440ml (66 x 150mm) or 500ml (66 x 168mm) cans and can be neatly stacked for more capacity. The 440ml version will also fit the newer 330ml “sleek” cans (58 x 145mm) but not quite…
CHANGE LOG: 20th Jan 2025: Added central hole for better fit. Improved tolerances so less sanding required. Contrary to GoPro's official stance, it is possible to mount a quick release base from the Hero 13 Black to older GoPro Hero…
Sometimes you might want to mount your Hue dimmer somewhere a little different, like on the aluminium mic stand in the picture! Pictured is the V2 Dimmer - you know you have this if it says “Hue” on the lower button EDIT 16th Feb 24:…
Updated model: slightly wider for stability and better recess for the magnetic sheet. This stand will lift an Ableton Push 2 controller to an angle of 35 degrees which will allow much better visibility of the screen and improve access to…
Since my Dremel 8200 set came with a different sized charger, I made this to complement sacrilegor 's excellent Dremel box organiser https://www.printables.com/model/217722
Replaces the original plastic cap on the Ergotron LX series pole mount to allow fitting of a microphone boom arm. Various models: 14mm for Rode 15mm for Elgato 17mm for Sensic Print top side down without supports. This part will take…
The rear of the K1 series toolheads has a super fiddly cable management hook for the extruder wires. This guide made things much easier when I installed a new DXC extruder (highly recommended btw!). Ideally, you just screw through the…
As far as I can see, Velocomp only offer one pitot tube as a spare part, so this should fit all versions (don't hold me to that, though!) Print vertically, threads at the bottom with no supports required. Use quality setting 0.1mm layer…
Fills in the unsightly gaps, hides cables and generally tidies up the look of this case when using an SFX-L PSU. Print face-down with no supports required (you might want to use a brim to prevent warping). Photos show prints done on 0.6mm…
Realising that that my old desk tidy was turning into a dumping ground and I only regularly use two pens and a pencil, I designed a clean little holder for them. Two holes @11mm and one @14mm fit my favourite writing and drawing…
The iLoud Precision series come with a pretty good set of 4 isolation feet, but these are only useful if placing the speakers on a shelf. These stands allow the use of the existing feet, but angle the speakers upward for desktop…
These are all currently available results.
