Counting matching models…
An adapter to allow 3M spraypainting/dust/particulate filters to be used with NATO gas masks using the 40mm isometric thread. You can copy and edit the original file here:…
I have not printed this, but I only made very small modifications to the last model.
Supports required. I printed in PETG on MK4S with 0.2mm support gap and it came out acceptably with easy support detachment. Some print errors on the wings.
Print in ASA/ABS or another heat resistant plastic because I think it will reach over 60*C (so no PLA) The Ninja Foodi has a design flaw whereby the small plastic tab that activates the safety switch is easy to snap off. This fits over…
This is a cylindrical housing for the 6-pin USB-C female sockets which can be bought cheaply online. 6Pin Usb Electric Terminals Welding DIY Data Cable Support PCB Board Type C Female Connectors <Jack with Dual 5.1K Resistors Unlike…
This fits a G18 thread size
Pressure advance needs to be set differently on the first layer than other layers because of the "squish". Adapative pressure advance settings currently don't allow this. If the wrong settings are used then bed adhesion is extremely poor…
Print settings: Spiral vase mode 0.8mm wall thickness (standard 0.4mm nozzle) Single wall Original design file here if you want to modify:…
Prints well in PLA with no supports. Very durable and shows no signs of wear. You will probably need to adjust the innner diameter slightly in tinkercad if you are buying a different style of lid…
This is the gripping handle for a MicroShift gear selector on a bicycle. I used it to replace one that was lost. The fit is quite snug, so you will need a well calibrated printer but a little heat or grease would probably ensure it fits…
This is a very simple way to restore functionality to the vax steam mop. It allows the switch to be latched “on” or “off” easily so that the mop can still be used after the badly designed handle breaks. Material: PETG Bed: Smooth PEI with…
The orcaslicer .3mf file contains the actual best settings, which I used successfully. If you're not sure how to set "negative volumes" in your slicer, use the .stl files and set the print settings manually, because it is important to…
A replacement power switch for the BS1500 hairdryer. Not perfect, but good enough to restore function - modification encouraged, please improve on this! Original design file:…
This is a model I made to test problems with retraction I'm having on my MK3S+ The seam usually starts on the inside corner, and under-extrusion can be seen here when the wipe feature is enabled on my printer. It's worst with PETG but I…
This is a replacement base for a Russel Hobbs kettle. You can find the original model here for copying:…
This is the battery cover for a Tommee Tippee thermometer Model TM22. It uses 3 overhangs to engage the locking mechanism on the thermometer securely. You need to print with wide outer-wall width, slow speed and slow acceleration to allow…
This won't work as a pipette tip if you print it, it will leak and have high friction. I used this model to help me design a better gripping system for the pipette tips, so I could handle viscous liquids. It is accurate to the tip I have…
This is a bicycle light mount adapter to get the Strada eXposure light to attach to a generic bike light mount. It probably won't fit your mount, but you can change the design yourself in OnShape.…
This is a very simple 0.5g model with 0.45mm thick walls, designed for comparing arachne wall generator to fixed-width. It will almost certainly print with gaps at the start of every seam, and to be honest i haven't really found settings…
These are all currently available results.
