Counting matching models…
The model is not an exact scale replica of the interceptor drone, but I tried to make it look as close as possible. It is recommended to print the model with a 0.12 - 0.08mm layer height. For the upper body, use the variable layer height…
Filament spool holder with adjustable width 45-75mm. Layer height: 0.2 mm Walls: 3 perimeters Top and bottom layers: 4 each Infill: 25% I recommend performing a plastic shrinkage test and applying corrections in the slicer to ensure…
Accessory for cleaning trapezoidal screw TR8x8-4. Your printer must be properly calibrated, and a plastic shrinkage test should be performed for accurate printing. After printing, the cleaner should be rotated several times on the screw…
VzBoT CPAP Fan Duct and upper duct. For best visual quality, print with a layer thickness of 0.12 or less.
This project is best suited for people who have plenty of free time, a spare Flying Bear Ghost 5 printer, and access to a milling machine for manufacturing frame parts, motor mounts, and printhead components. The printer turned out to be…
Adjustable-angle smartphone stand. The stand is suitable for smartphones up to 10 mm thick (lower holder 11 mm), and a version is also available for phones up to 12 mm thick (lower holder 13 mm). The height of the stand allows for…
The design of the print cooling fan, controlled by a flap, allows more precise cooling of overhangs. Controlling the airflow with a flap allows for more precise cooling of overhangs. This enables the printing of more durable parts, as…
⚠ Attention! The accuracy of this belt tension meter depends on the precision of its manufacturing. Your printer must be well-calibrated, and shrinkage tests for the filament should be performed. Holes printed perpendicular to the bed are…
For printers with CoreXY kinematics it is important to tension the belts equally. A tension tester with a strain gauge sensor allows this to be done. This is the second version of the tester, simplified and improved: the cylindrical belt…
I recommend printing the box halves with a 0.2 mm layer height, and the hinges with 0.12 mm. Magnets are inserted during printing. Mark the correct side of the magnets to avoid installing them the wrong way. A STEP file "fixator" has been…
Nozzle can serve as a replacement for the original broken one, or as an additional thinner one. Can be used with other vacuum cleaners featuring a pipe diameter of about 34.5 mm. Print parameters: PETG plastic, 0.2 mm layer height, random…
The spaghetti was made by heating the filament with a heat gun and crumpling it. Assembled using a hot glue.
These are all currently available results.
