High-speed interceptor drone model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
High-speed interceptor drone model with a magnet inside, can be placed on a fridge or on a fan.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 365
- Makes
- 0
- Views
- 1,327
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The model is not an exact scale replica of the interceptor drone, but I tried to make it look as close as possible. It is recommended to print the model with a 0.12 - 0.08mm layer height. For the upper body, use the variable layer height function. The antenna mount can be made from a piece of filament. A 10×5 mm magnet will also be required. To ensure the propellers can rotate freely on the fan or from other airflow sources, the inner surface of the "propeller hub" parts needs to be sanded. For assembly, any glue can be used. However, be careful when gluing the "shaft" part, because even a small amount of glue will prevent the propellers from rotating.