Counting matching models…
Updated: 2024/07/29 Added 180mm version (Silverstone AP181, mounting hole spacing 165mm). Updated: 2024/06/09 Remodeled the outer surface so now it can be scaled to more different sizes without making the shell too thin or too thick. It…
ProtoXtruder Latest update: 2024/12/12 An extruder that utilizes the large extrusion gears of HGX-lite gear kit and comes with the mounting pattern of the Sherpa Mini Extruder . There is also an untested version for Bondtech LGX Lite…
NOTE: This model is only published on Printables (here) and my Github repo , licensed under GPLv3 license. Any redistributed work should provide appropriate attribution and copyright notice. Large Gear Clockwork2 As title, it's basically…
ProtoXtruder 2.0 Last update: 2024/04/19 The sequel of ProtoXtruder ! With the new gears of HGX 2.0 Extruder (affiliate link) , it becomes thinner and lighter while providing the same benefits of the large-sized gears. Although it is…
Hummingbird Extruder A compact extruder design that has the same form factor and mounting pattern as the Bondtech LGX Lite . It utilizes the large extrusion gears of HGX-lite gear kit to accomplish high gear ratios and good filament grip.…
They are basically the same as @Elothan's design. Only difference is the added cross bridge features so that they can be printed without support or punch through layer. The STLs are rotated in the printing direction. The bridging are…
Remixed from https://www.thingiverse.com/thing:4740831 A simple print-in-place bag clip remix. Made the clips open at 15 degrees so they are printable on small-sized printer while keeping the two parts from sticking together. Print with 3…
Mini Stealthdort You are responsible for your own printer and try this at your own risk! Features Shorter distance between the extruder and the hotend. Light-weight printed parts. The extruder will be mounted 4mm lower, so the tube is…
A cover to keep the extrusion slots clean or keep wires tucked in there. Works with both LDO and MakerBeamXL profile. Prints vertically and it snaps into the slot. You can also try printing it laying down flat but you might need to adjust…
A simplistic design to keep your garden nice and tidy. Design highlights: Rounded rectangular shape for high space utilization. Lots of holes for good drainage and ventilation. Raised drip tray so the excess water doesn't block the…
A snap-in mount for Nevermore micro V4 on Voron0 or other small printers with 1515 extrusions so no preloaded nut is required. Requires 2 Voron-spec heatset inserts (M3 x D5 x H4). The clip mechanism is adapted from the screwless probe…
Voron Switchwire Double Shear Motor Mount This mod adds another bearing on the motor mount to support the other end of the motor shaft. It reduces the bending effect on the shaft caused by the tension of the timing belt. In theory it can…
StealthProtoXtruder 2.0 (SPX2.0) Last update: 2025/08/02 ProtoXtruder 2.0 in stealth mode (low-poly style)! Most things are common between the two extruders. Please checkout PX 2.0 Github repo for details. (BOM, assembling, etc.)…
These are calibration model designed to be use with the Print Tuning Guide by Andrew Ellis . Specifically, for the part of tuning extrusion multiplier . This is designed for PrusaSlicer since at this time PrusaSlicer doesn't support…
Printed TPU Feet for Voron 2.4 / 2.4r1 This is not compatible with V2.4r2 I'm not a fan of the looking of compressor rubber feet, but still too lazy to switch the Z drives and skirts to V2.4r2. So I made these printed feet with a low-poly…
V0 Stealth Skirts Mods and Fixes The original mod is in VoronUser repo . At the time of writing these fixes and mods are available in this pull request at Maverick-3D's repo pending to be merged. Only the parts that was changed are…
Voron M4 with PC4-01 Bowden Connectors This is a remix of the beautifully designed Voron M4 extruder. Since the bowden collet in the original design is a little bit hard to source, I've adjusted the size of the hole to fit a more common…
The original XY joints of Voron 0.1 tends to crack along the layer lines when tightening the flat head screws. This fix enlarged the countersink holes so the screw head can be flush.
Mounting the Orange Pi There are two different hole sizes of the mount: If you are using the heatsink case as shown in my photo, print the M2.5 version and use the provided M2.5 screws with the heat sink to screw directly into the base.…
Drop-in replacement for PUG, but more flexible and durable. I like PUG a lot, but one of them broke after using it for a while. (Printed in ASA) I tried using TPU 95A, which is much more durable, but it came out way too soft. This remix…
I prefer the look of the original Stealth Bumper than the one provided by LDO motors. It uses a LED diffuser mask to provide better light masking and also makes more contrast to the printed main body. You can print the mask in either the…
Tri-direction Foldable Spool holder (2020 and 3030 frame) Last update: 2025/11/11 Side mounted spool holder is more accessible? The original spool holder is getting in the way when using an MMU? This spool holder can be easily flipped to…
An attempt to put abstracted Arc Reactor style design into a cover for MasterLiquid Atmos. Try printing the lower half in translucent filament and the upper half in opaque one with a filament swap (as in the render).
A quick print to hold your LDO motors hex drivers on IKEA SKADIS.
Motor frame mod for mini-afterburner. (link to the original file: https://github.com/VoronDesign/Voron-0/blob/Voron0.1/STLs/Toolheads/Mini_Afterburner/Motor_Frame_x1.stl ) This is my attempt to solve the wood grain / issue-6 print quality…
A compact extruder design that has the same form factor and mounting pattern as the Bondtech LGX Lite . Although it is named Hummingbird 2.0 , it's not a direct upgrade from the previous design. There's not much you can reuse in the BOM.…
Yet another versatile toolhead design for Voron 0.2. MiniSB Draco (for Dragon) is designed primarily to fix the miniSB's compatibility with the Phaetus Dragon hotend. (But it supports many other hotends too!) A more detailed description…
Shaved off about 4mm on the top side to get a shorter distance from extruder to hotend. Removed TBG Lite support as it might not be that popular. Removed the rear two mounting holes for LGX Lite. They interfere with some X carriage…
Multibody MakerDeck Logo Each colored part is 0.6mm thick so you can use filament swaps to do multicolor print even on a normal printer without multi-material addons. Here is a good tutorial on Cura but the same technique can be done with…
A 3D printed torque wrench design inspired by the LDO mascot - Steppy . The dimension is designed to match a NEMA14(23mm height) stepper motor. There's also a version without the LDO logo. If you like my design, support me through the…
From the model and product description that Corsair provided, it seems like that the pump is intended to be mounted with the tubes coming out to the right side. If your setup needs the tubes to come out from the bottom (or top), most of…
You can print this Capswap module in many combinations with your own creativity. For example, The infill part can be printed in low percentage infill and no top/bottom shell, or in translucent filament. The _bottom parts can be printed in…
These are all currently available results.
