Counting matching models…
Printed at .2 layer with .4 nozzle with 5 layers per wall. I used PETG for flexibility but PLA may work and PLA plus should be good. I printed 1 at 15 percent infill and it worked fine, I also printed one at 25 percent and it felt nice…
Printed with .6 nozzle at .42 layer height PETG. It can be printed with .4 nozzle but strength may be less. 50 percent infill with 3 layers This is a 3d scan so there are some imperfections but it works as it should. you take your own…
Printed with .6 nozzle .18 layer height. Face plate has 2 layers thickness and hitch has 4. I placed a pause in the print so you can change color or filament type from face to hitch or print the other one with no pause. I printed face…
Printed .4 nozzle with AMS Bambu P1S on a smooth mirror finish PED plate. .20 layer height. No supports print with flag face down. First ¼ inch is Grey PETG and black PETG paused at a ¼ inch and started PETG Carbon fiber for the hitch.
.28 layer no supports PETG
Printed at .20 with a .4 nozzle. If you print any lower layer height the overhangs will not look as nice, and any higher of a layer height the bullet will not look as nice. Printed with Elegoo PETG and I printed one with Giantarm PETG…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA JAYO Black Transmission Distance: 0.3 PLA PolyTerra Earth Brown Transmission Distance: 0.3 PLA JAYO Gray Transmission Distance: 2.5 PLA…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA JAYO Black Transmission Distance: 0.3 PLA Default White Transmission Distance: 5 PLA Overture Blue Transmission Distance: 1.6 PLA Gray…
I used PETG, the profile is listed for texture plate, but if you want the hologram on it then you will need a smooth plate and a smooth plate profile used. I printed a 20 percent infill for face and 40 percent for hitch for the added…
Print Face down .4 nozzle .28 layer height PETG due to sun warping PLA.
Printed with PCTG .6 nozzle with .42 layer height. Built for my clamping downrigger, but have used for any devise that can clamp onto a block. I am guessing this would work with PLA (maybe white so it does not warp in sun) and PETG (which…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA JAYO Black Transmission Distance: 0.3 PLA JAYO Gray Transmission Distance: 2.5 PLA GEETECH Gray Transmission Distance: 3 PLA JAYO White…
These are all currently available results.
