Counting matching models…
Remixed from CarlTheCreator's AirPod Charge Dock . Took 20 mm off the back so that the AirPods case could open while charging. Rotated the thing 126.5 degrees to make it sit flat on the print bed. Put some small 3M Command Strip adhesives…
I like to wear hats, but living in a studio, storage space is limited. Some people use shelves and hanging closet organizers , which are bulky, or hooks, which hide the beautiful designs on your hat. My wife asked if there were some way…
Moved to GitHub 2024-01-10: All future updates will come through GitHub: https://github.com/jon-le0234/DoomScroller The work started growing too fast to manage two projects each on Thingiverse and Printables, so moved everything into one…
Since the HomePod mini's driver fires downward, I opted against using a standard shelf design so that the audio would project against the wall and spread more evenly across the room. You'll need some M3 nuts and 8 mm socket cap screws,…
Overview The BookKeyPad is a stand that positions the Magic Keyboard and Magic Trackpad together like a MacBook. The name pushes the words together just like the 3D model does to the accessories. The stand tilts both Magic Devices so they…
Introduction The Car Vent Phone Mount is all in the name. Only recently have cars come equipped with Bluetooth and CarPlay, so the CVPM is the perfect, low-cost improvement to your driving experience by making your phone easy to see and…
Overview If you've used a Baratza conical burr grinder for a while, then you'll be familiar with the sacrificial ring burr holder (part number SP0101174 ) cracking and needing replacement. It only costs $5 + shipping or $20 from a local…
Moved to GitHub 2024-01-10: All future updates will come through GitHub: https://github.com/jon-le0234/DoomScroller The work started growing too fast to manage two projects each on Thingiverse and Printables, so moved everything into one…
Coffee grinds are especially messy. My wife drinks French press, and I drink espresso. Switching between the portafilter and the grounds bin often leaves a mess of grinds on the counter, so I made a little catcher to reduce the mess.
My wife wanted something actually useful instead of cubes, Triforces, and Benchys, so she asked if I could make an organizer for her stud earrings. I'm the stud now. Depth of the holes is 10 mm, and the width and the length of the holes…
Overview A portable and powerful USB-C fan with multiple speeds for surviving music festivals and climate change. Select from four or more speeds with the push of a button. Pair with a spray bottle with pressurized mist for maximum…
Modified Mini DoomScroller design to hold a Nintendo Switch. Files provided as a PrusaSlicer project with suggested settings for supports and infills. After opening with PrusaSlicer, select “Open as project” option.
Radius gauge with multi-material or multi-colour markings for convenience. For MMU/AMS users, use the Multi-Material file. For single filament printers, use the Multi-Colour file and add a Color Change . Markings start between the heights…
Spacer that keeps the coffee scale platform from touching the rear cover on my espresso machine, preventing variation in the measurement.
Modified the original Turbine and Case to rotate on cones instead of a glued filament shaft. Put a little dab of oil on the top and bottom of the turbine to make it spin more easily. User still needs to fine tune the tightening of the Lid…
Introduction "Mệt chết" is Vietnamese for "dead tired." I was recently diagnosed with sleep apnea, and while I have a CPAP machine and got surgery to open my airways, I'm a warm sleeper, which presents a different challenge. BedJets…
Coil the power input and USB cables to clean up the clutter at your charging station. Print in PLA or PETG without supports.
Most SKADIS tool mounts seem to require some plastic outline of the tool with hooks. While it looks impressive, it just doesn't work for my process. This toolbar requires far less time to design around individual tools, so less printing…
Added holes for an M3 bolt to fasten the WinderBase and ReleaseCover . Length can range from 4 mm to 12 mm. Used Sufix 832 ice braid as a fishing line because it worked better than paracord and wasn't expensive. Also added a shroud to use…
Made it so I can calibrate my WiiMote when playing tennis in Wii Sports Club. Including the STEP files I made for the remote and stand.
Why make your own saddle bag? Carrying groceries in my backpack was hurting my back, and I wanted a cheap solution. Background Commercial saddle bags can cost up to $70, but they're overkill for most uses. They also come in a limited…
Overview When I was starting out with designing 3D models in CAD, I designed charging docks so that they could be fully printable. That constraint tends to create larger models than necessary, plus it tends to require a lot of work to…
I wanted a simple way to organize my headphones, and the numerous desk clamps weren't cutting it for me since I move around the tabletop too much. Supports headphones with bands up to 45 mm deep and about 15 mm tall. Hang the connector in…
Having looked into aftermarket Apple CarPlay stereos, it seems like my car's centre console doesn't have drop-in replacements because of how they designed the integration between the climate controls and satellite navigation option. Any…
Overview Made this model after building the Dayton Audio MKBoom kit from Parts Express so I could replace the Bluetooth panel ( KAB-PMV3 ) and use my external speaker amplifier, the Aiyima A07 Max . Designed for the Wago 221-2401 because…
Realized I could design a secure wall mount for my HomePod mini 1Gs after taking it apart to disable the touch panel. Made to fit a #8 wood screw . Drill two holes separated by 67 mm.
Some of my HomePod mini 1Gs suffered from the virtual ghost touch problem, which would randomly play music at night or repeatedly perform a factory reset. The solution was to disconnect the touch panel , but in the process, the foam…
These are all currently available results.
