32 models
I remixed this model from the excellent design by Kai. I have included the hooks from the Thingiverse design by CSD_Salzburg for convenience. I like the design and used it for some time, but I needed something that could fit a bigger…
Print approx. €5.06–€6.19 excl. taxPreliminary estimate for one variant
SleepHQ I took the design and remixed it by adding the SleepHQ logo instead of the Raspberry Pi logo. Printing tips: The included code is for a Mk3S+ with a .25mm nozzle. The tighter your printer is calibrated, the better. The model was…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
v3: Added corrected brackets for mounting with velcro or command strips, if screw mounting to the wall is not an option. They should print properly now! Get your CPAP off your nightstand! Get it on the level of the mattress, too, if your…
Remix with SKADIS hooks on the back…. Print wil supports unless your printer can defy the laws of physics.
Simple zip tie holders for your large zip tie collection. Fits the standard 1" spaced North American pegboard. These are 70mm wide, so they will hold a LOT of zip ties. Heights available: 200mm tall sized for 12"/30cm ties 150mm tall…
Introduction I liked the air exchanger model from user gwg, but I thought I would be able to make some changes. I hope you find them useful. The top has been changed to a solid peice, and you must use a modifier to use hexagonal infill to…
I have a lot of bits. So do you. Why not have more space to store them and be organized? BuildComics' model was a good design in my opinion, but I needed more. Much more. Unfortunately, the Fusion model file downloaded wasn't parametric,…
If you're not familiar with Quad Lock…. https://www.quadlockcase.com I merged the perfect Quad Lock mount by vincenzo with the Skadis Universal Hook found here:…
Holds your essential metric drill bits. Printing Base Supports needed for pegs Recommend creating a modifier to increase infill around the pegs for better strength. I went to 100% Once printing is done, you may need to drill out the holes…
I printed the spool holder, but in the course of printing something else, the roll came off the holder. Tinkered this up so it can be fastened to the spill holder with a couple M4 bolts. It gets the job done… Depending on how many spool…
READ FIRST This mod is EXPERIMENTAL!. I have installed it on my machine, but you should consider carefully if this is something you want to change on your machine! I will not guarantee that this will not break other parts of your printer!…
Following up to Super 7's excellent model, I made a simple change. I integrated the logo from YumanBeing's model and exported it. Printing Considering these will be carrying some weight, I suggest using PETG. I found Ryobi green/yellow…
Remix of the excellent Universal Filament Drybox with Tush++ from kageiit on Thingiverse. https://www.thingiverse.com/thing:5138492 Fits most manufacturer's single 1Kg spools or smaller spools using the adjustable base No supports needed…
For easy power strip mounting while keeping access to all USB ports and power plugs. Modeled in Tinker CAD, I did manage to make the brackets just a bit taller than I needed to. I used a couple rubber dots on the pads of the power strip…
I designed this in Tinker CAD…. I am not a smart 3D modeler. This fits the Microsoft Surface Pro dock and allows for access to all ports. I printed at .2mm with Black PLA.
License plate holder/bracket/mount for a 2018 Volkswagen Golf Alltrack. This may fit more models and years, but I am not sure. If it does, please let me know in a comment, and I will make a list here. There are 11 possible mounting…
TinkerCAD file , modded for fun. Looking for a solid AirTag mount that I could place in shipping crates for transportation company accountability, and didn't find anything that was robust and simple. Marcurio made a good model for a bike,…
A simple remix of honei's BPM Connect and Thermo holder. I don't have a thermo, so I took the model, sliced it up in Tinker CAD to use the side that was sized for the BPM connect itself. I also added a small screw hole on the back for…
Many thanks to Thingiverse user woodwerk for the original design. I needed an easy way to hang up my Fluke 101 multimeter on my pegboard. I didnt need the holder for the Klein tester, so off to TinkerCAD we go! Here is a link to the model…
Thanks to Heine Sorensen for posting the original drawer model after posting their mod for Were screwdrivers here: https://www.printables.com/model/219770-wera-micro-screwdriver-under-drawer I needed a drawer for coins I use to pay for my…
Introduction I was looking for a hanger for my newly-acquired 13-peice metric hex wrench set. I found only one model, and when I loading it into the slicer, it came out the size of a postage stamp. Well, that won't do, so time to get to…
I took a terrible model and made it worse. Print it how you like. I used PETG at .15 layer height since I was printing it in a sub-optimal orientation. Enjoy it. Or not. Roast me mercilessly in the comments if you want. Someone requested…
Took the original file and expanded it to 6 nozzle assemblies. Fits nozzels with silicon socks perfectly. Also made a looser fit version for anyone who wants it. The SKADIS pegs on the back will be a tight fit, so some force will be…
This modified feeding tray is for this feeder: https://www.amazon.com/PETLIBRO-PLAF005-Automatic-Cat-Feeder/dp/B0953SDCRG/ If it looks like this, you are good to go. I remixed the slow feeder for another model of Petlibro feeder to fit…
Got a first generation Raspberry Pi Model B and rack mount it? Here you go! This model is for left rack mounting. You can't mirror it in your slicer because the mounting holes are not symmetrical. Printing is straight forward- the only…
Used the excellent desk mount from here: https://www.thingiverse.com/thing:3624874 Shredded it in tinkered and made it into a pillar or wall mount. This is kind of rough, but it gets the job done. Attach a Quad Lock head of your choice to…
Description A simple handle sized to fit your top cover. I do not have my cover affixed to the printer using the rivets, so I can access the extruder easily. I needed a handle to grab the cover off easily when needed. Printing Print it on…
MAGNETIC Remix here! Bracket set for an Anker 351 Power Strip. It has cutouts for the power switch an USB ports. Strip is available here: Amazon Link No special settings needed for printing. You will need to enable supports (I used…
To take advantage of the quick swap features of the MK4 printers, they need to be pre-assembled with different extruder types and diameters (example: hardened steel, 0.6mm diameter). Then all you have to do is disconnect 2 cables and…
Background I recently moved and my printer is now in the basement. My basement is pretty cool, so I needed an enclosure for anything more technical than PLA. I have a webcam in the enclosure, and I wanted to be able to see the temperature…
I was thinking about my life and thought to myself, what is the most bastardized model I could come up with? The answer was easier than you might think! I found these two models here at Printables:…
I needed to mount my BirdBuddy feeder. The directions said to use a standard bird feeder pole to mount it. I'm not sure what a standard bird feeder pole is, but I did not find one that fit at my local big box store. I instead decided to…
These are all currently available results.
