Counting matching models…
I wanted a corner radius template for making nice rounded edges on woodworking projects. I saw a few, but didn't like them for one reason or another. I tend to make a lot of small projects and want something for the router table. I also…
I made a corner cutter jig for my bookbinding mom. It will accept board material up to 1/8" thick, and sets the cut edge 1/8" from the corner. It cuts the corners precisely and aids in folding cover material over the hard inner board. I…
I created a zero clearance insert to replace the standard stock insert on my DW715 Dewalt Miter saw. This one has been in use for a few months now and doesn't show any serious signs of wear. It requires a long bed (I have a prusa i3), but…
My sprinklers were all very overgrown with grass so I made a 3" hole saw to help clear out the area. You put a 1/4-20 bolt in the center and use a nut to hold it in place. It does a good job of breaking up hard dirt and grass around the…
A component of the parts kit 3768. It is a cone shaped lower spring retainer for my 4x4 Rustler vxl. I got my ruslter and took it out for a spin. It collected every kid in the neighborhood! An hour later after they had all had a bash, I…
A very similar concept to my radius jig ( https://www.thingiverse.com/thing:2438336/files ), only this is a chamfer instead. The length written on them is a measure from the corner of the board to the edge of the template. See the diagram…
RTIC went and re-designed their 30oz tumbler, and the old handles don't fit on the new mugs. My guess is they did it to make people buy new accessories. Maybe YETI did it first and they followed suit. I don't know if this will fit YETI…
I printed a set of stocking holders for my fireplace mantle. One has a front facing hook the other has kind of a side hook thing. Some stockings require one kind, some the other. This way they will all face forward properly. Print…
I do a lot of grilling and where I live everything is tank exchanges. You get an inspected tank every time, which is good! The bad thing is they use a 400lb gorilla to close the valve down before it leaves the blue rhino facility.…
This blade disposal box (aka sharps box) is made to accept standard utility blades, snap blades, and single edged razor blades. All very useful for doing work out in the shop. The cross cut shows that the blades will not easily fall out.…
Bosch's flexiclick system is really slick, but you need a good home for all those attachments. The attachment holder has two sections with a raised support for the right angle and offset attachments. They are so tall that they will tip…
Whenever I need to do some soldering, I have Patrick Starfish helping me out. The adjustable hose I picked up seems to have a narrower fitting than most, so I made my own version of a base. The pipe fitting just slips in place, but a…
I wanted more T-nuts for my shapeoko pro hybrid table, so I made a print that accepts heat set inserts. These specifically (M6x10x7): https://www.amazon.com/gp/product/B08Z7541M5/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 I insert…
A sliding lid cookie monster box I made to store the cookie cutters I printed for a friend. Print should not require supports. Lid was made by switching filaments after the layers got to Mr. Monster's face. You could use a sharpie to…
I wanted a custom printed handle for my RTIC cup, but couldn't print some of the others available because of bed size. This one is made in two pieces so my MP mini could handle it. A single 1/4" bolt of at least 1" in length is needed…
I love my laser range finder (GLM 35), but it really needs a case. The keyboard and output windows are probably not going to last long in a tool bag. I didn't have Bosch blue filament, so I went with black. Mine slips in with just a…
All the soft plastic tips for my brad nailer fell apart, so I had to print more. This fits pretty snugly. I haven't used it a bunch, but it feels like it won't fall off. Maybe a little dab of soft glue will keep it on. 0.15 layer height…
Probably could fit tighter, but I don't hear it rattling around, so good enough for me. It is nice to have a little place to stash garbage for a few days till I remember to empty it. PETG suggested.
Every time I go to buckle my son into his booster seat, the buckle is running away from me. This TPU wedge goes into the space where it wants to pivot down. Now it stays proud and I can wrangle the small boy faster! It is a loop which…
Magnetic base that replaces the small white one that comes with the Tapo C110 wifi camera. Sits on the top rails of the Prusa XL. Uses 12x2mm magnets. I measured mine to be closer to 1.75mm thick, so that was how deep I made the pockets.…
I have a set of 6in 3 and 4 jaw chucks from precision matthews. The jaws are 20mm wide each and are pretty similar. I suspect it will work for most chucks in that size. the 4 jaw has 90 degree cuts and the 3 jaw has 120 so they all come…
I wanted to hold my sunglasses out of the way and not be sitting in direct sunlight. This guy has a curved back so he matches the underside of the ioniq 5 dash. If you want to make your own, the curve on the backside is a 20inch radius.…
These track guides are designed to work with the E Emerson straight edge clamps. They will attach to a piece of 1/2" plywood with #6 screws and let you make your own saw or router guides. That is what I did, I turned it into a track saw.…
The spindle bore on my PM1130 is 1.52in (38.6mm). I made this basic collet thing to cram in the backside of the head stock and support long stock. I didn't have room to clamp anything on the outside of the spindle, so any support has to…
This is kind of a mad project to get a better phone charger into my ioniq 5. Should you do this? Probably not, but if you want to, I have instructions a reddit post.…
Rail covers to protect my bare foot from resting against the rail when paddling my crescent crew. I assume it will fit on other crescent kayaks as well.
Print with PETG and let your dog roam free without worry of rolling down the front door. This is a work in progress and may require further iterations.
I originally was going to screw this box down somewhere but decided to use nanobubble tape to stick it to the inside of my dash. I made it for my ioniq 5, but you could stick this little guy anywhere. Nanobubble tape is a great way to…
These are all currently available results.
