P
PrintablesNagyBig
Kunai pack
The pack was meant for decorative purposes. All parts are interchangeable, insert core and glue it. Original upload date: 2023 Dec. 14 Updated Jan. 11, Core pieces.
- Downloads
- 14,724
- Likes
- 4,807
- Rating
- 4.88
All models
Counting matching models…
P
PrintablesNagyBig
Bathtub Lotus
Floats on water, meant for the bathtub. No special setting needed, no support. Great gift.
- Downloads
- 1,715
- Likes
- 398
- Rating
- 5
P
PrintablesNagyBig
Glasses Party Glasses
Go for V2 rather: https://www.printables.com/model/869562-v2-party-glasses-use-up-the-almost-empty-spools Short Video : https://youtube.com/shorts/EPEGvbKIh5A Perfect to use up the almost empty spools! Give it out on parties, it's a great…
- Downloads
- 1,305
- Likes
- 99
- Rating
- 4.89
P
PrintablesNagyBig
3D Hibiscus flower
Print the petals and shape them accordingly. I used my oven as a heat source here because I didn't have a heat gun at the time. Note that the petals on the middle of the print supposed to fuse a little bit together, I found this as the…
- Downloads
- 1,276
- Likes
- 207
- Rating
- 4.75
P
PrintablesNagyBig
Light Lotus
No special setting,no support needed. Enjoy!
- Downloads
- 1,127
- Likes
- 235
- Rating
- 5
P
PrintablesNagyBig
Chicken mold butter
The first thing on my list for this year is done! Butter Chicken! 0.12 Layer height If you want to recreate it: Watch the video. Have the butter at room temp. Use plastic wrap! Press it in. Into the freezer for a while. If it has some…
- Downloads
- 926
- Likes
- 232
- Rating
- 5
P
PrintablesNagyBig
Big Bathtub Boat
I printed with 0.2 layer height. You can scale it up. Cheers!
- Downloads
- 877
- Likes
- 80
- Rating
- 5
P
PrintablesNagyBig
KeepitFrog
I printed with layer height of 0.2, no supports needed.
- Downloads
- 813
- Likes
- 205
- Rating
- 5
P
PrintablesNagyBig
Vase mode Mushroom Shelf
Printing the mushroom: I printed with a layer height of 0.16 in vase mode. On the bottom of the print there is a 0.6 mm deep rectangle valley so for example in Cura slicer if you uncheck the “Remove All Holes” setting and set the number…
- Downloads
- 610
- Likes
- 250
- Rating
- 5
P
PrintablesNagyBig
V2 Party Glasses - Use up the almost empty spools
Easy and fast print. For the joint just insert some filament(1,75) . Perfect to use up the almost empty spools! Give it out on parties, it's a great conversation starter!
- Downloads
- 578
- Likes
- 57
- Rating
- 4.89
P
PrintablesNagyBig
Thrumbo - RimWorld
The body only needs support on the bottom between the legs and under the chin. My slicer tries to support the back of the head and where the fur starts but it's not needed. I removed the supports from there and printed fine. The horn is…
- Downloads
- 534
- Likes
- 72
- Rating
- 4.75
P
PrintablesNagyBig
Salt and Pepper Gun
Make sure you educate yourself about the potencial health risks! Microplastic is not good in the food for sure. Some people say it's okay to use it, some people say not. You decide how you use this model. Be responsible! Salt and pepper…
- Downloads
- 515
- Likes
- 119
- Rating
- 5
P
PrintablesNagyBig
Fruit Fly Trap
No special print settings, you will need a speck of glue to fix the stem on top. Enjoy!
- Downloads
- 490
- Likes
- 113
- Rating
- 4.86
P
PrintablesNagyBig
Chicken Foot Ornament
It's not much to tell about this sculpt. I'm learning Blender at the moment and I wanted to try some of my old ideas. So this is the Chicken foot Christmas tree ornament. Printed with a layer height 0,12 and sprayed with a gold varnish.
- Downloads
- 469
- Likes
- 52
- Rating
- 5
P
PrintablesNagyBig
Candle Lighthouse
It was designed to put 3 candles in it but the white middle section let's too much light out so I put only one candle in the top section. Printing: no support, 0.2 layer height, 0.4 line width.
- Downloads
- 409
- Likes
- 102
- Rating
- 5
P
PrintablesNagyBig
Duck face
The requested duck face is here! You find 2 models here: one is for decoration the other is with holes on the bottom for being able to breathe normally in it. The ear piece is connected with a filament hinge. Insert a 1.75 mm filament…
- Downloads
- 407
- Likes
- 112
- Rating
- 5
P
PrintablesNagyBig
Mechanical randomizer Dice or Fortune
I apologize for the print quality, I did this very fast just for demonstration. I didn't even level my bed. I have never seen anybody using filament springs but I believe it has a great potential for mechanical models. Try it out! Making…
- Downloads
- 338
- Likes
- 95
- Rating
- 5
P
PrintablesNagyBig
Vase mode Column as tall as you want
It's not supposed to work but it does. I'm so happy, I always wanted a tall column. Just print and slide together. Glue it, fill it it's up to you The difference between the bottom and the top part is that the bottom has the slide guide…
- Downloads
- 309
- Likes
- 123
- Rating
- 5
P
PrintablesNagyBig
Bathtub Rowing Boat KIT
Bathtub toy easy to print and assemble, no glue, no support needed. The flag can be on a tooth pick or a piece of filament from the spool.
- Downloads
- 300
- Likes
- 23
- Rating
- 5
P
PrintablesNagyBig
Cucumber Tampon\Condom holder keychain
* Just a little bit of support needed.
- Downloads
- 292
- Likes
- 57
- Rating
- 5
P
PrintablesNagyBig
Bone Necklace
Simple necklace with 3 mm holes for your string.
- Downloads
- 288
- Likes
- 59
- Rating
- 5
P
PrintablesNagyBig
Goldfish test
Printed with 0.2 layer height. Brim was used with a brim line count of 35. Not particularly hard to print but it will test your setting capabilities.
- Downloads
- 279
- Likes
- 46
- Rating
- 5
P
PrintablesNagyBig
Vented Garlic container
Fix the seam to the same coordinate on both parts, that will guide you putting it together. No supports needed.
- Downloads
- 258
- Likes
- 50
- Rating
- 5
P
PrintablesNagyBig
Disguise
Layer height 0.12 Insert 1.75 mm filament in the hinge. Ammm… that's it.
- Downloads
- 254
- Likes
- 79
- Rating
- 5
P
PrintablesNagyBig
Muffin container
I printed with 0.2 layer height, finer would be better. No supports needed. For the top part use raft if you have problem with elephant foot. The clearance is really small. It should turn freely.
- Downloads
- 232
- Likes
- 57
- Rating
- 5
P
PrintablesNagyBig
Butter Finger mold
If you want to recreate it: Watch the video. Use plastic wrap! Press it in. Into the freezer for a while. If it has some holes, put some more butter in the holes and press the mold together again. Try to minimize waste. The Finger was…
- Downloads
- 219
- Likes
- 107
- Rating
- 0
P
PrintablesNagyBig
Fancy egg holder
0.2 layer height is fine. To have the best result place the seam coordinates to x = 0 and y = 0 relative to the model. That way the seam is mostly on the inside and not visible at all.
- Downloads
- 216
- Likes
- 24
- Rating
- 4.67
P
PrintablesNagyBig
TPU Juggling "balls"
Printed with 0.2 layer height and 0.40 layer width, should be 2 lines thick minimum. No support needed. Layer adhesion dominates. I played with it on grass only, still holding after a week. I don't know yet how durable they are. The lid…
- Downloads
- 205
- Likes
- 47
- Rating
- 5
P
PrintablesNagyBig
Kitcard Chameleon
41x67x1.5 Kitcard a small chameleon, I made it for my chilli plants. Got the idea later to colour code my plants. Red ones get watered every Monday blue ones Mondays and Thursdays etc. Enjoy!
- Downloads
- 201
- Likes
- 60
- Rating
- 5
P
PrintablesNagyBig
Cucumber Letter opener
You just need a little bit of support (like me) for the base of the bottom part of the cucumber. Super glue the blade in place. If you have some blobs on the edge of the blade you have to file a bit. I had to file the blade a little bit…
- Downloads
- 199
- Likes
- 22
- Rating
- 0
P
PrintablesNagyBig
Circle helper target stencil
After I published my last project I got a request to make a circle helper for making targets on A4 pages. That's why I have on one side holes for 1" 3" 5" 7" diameter circles. But then I thought why not to expand it to make a bit more use…
- Downloads
- 195
- Likes
- 84
- Rating
- 5
P
PrintablesNagyBig
Megaphone VASE MODE Megaphone
Two part megaphone, just screw the two parts together. Print in VASE MODE! IMPORTANT : Part one has bottom layers! Part two doesn't!
- Downloads
- 192
- Likes
- 22
- Rating
- 4.5
P
PrintablesNagyBig
Egg legs Egg Holder
Two parts, legs shout fit snugly so no glue needed.
- Downloads
- 192
- Likes
- 21
- Rating
- 4
P
PrintablesNagyBig
Seal of approval
Make someone happy, give a seal of approval. Printed with no supports. 1.6 layer height
- Downloads
- 183
- Likes
- 31
- Rating
- 5
P
PrintablesNagyBig
Muffalo - RimWorld
Needs a little support under the eyes only. Set the min support angle to 60°. Scale it as you wish. Cheers!
- Downloads
- 182
- Likes
- 46
- Rating
- 5
P
PrintablesNagyBig
Restroom sign, wax filled
Printed with 0.2 layer height, 4 top and 4 bottom layers. If you don't want wax then you can do a filament change before the last 4 layers. But will have a different effect.
- Downloads
- 178
- Likes
- 84
- Rating
- 5
P
PrintablesNagyBig
Boomalope - RimWorld
Needs a little support on the front. Scale it as you wish. Cheers!
- Downloads
- 178
- Likes
- 46
- Rating
- 5
P
PrintablesNagyBig
Filament cage
I used PLA, this prusament PLA is flexible enough. Start the assembly from the top. Super glued on top first and then the ring the door and the bottom. Adjust and cut away the excess filament on the bottom. I used 14 cm filament pieces,…
- Downloads
- 167
- Likes
- 67
- Rating
- 4
P
PrintablesNagyBig
Boot Ornament Christmas Ornament
2 color change Santas Boot Christmas Ornament
- Downloads
- 155
- Likes
- 44
- Rating
- 0
P
PrintablesNagyBig
Cactus Tip Jar
As for printing: I printed with layer height of 0.2, no support. The spines are from leftover filament (1.75) inserted in with a dot of glue.
- Downloads
- 146
- Likes
- 56
- Rating
- 3
P
PrintablesNagyBig
Wine Bottle Bow Tie
Printed with 0.12 layer height. Enjoy!
- Downloads
- 146
- Likes
- 30
- Rating
- 5
P
PrintablesNagyBig
Bathtub boat with wind up propeller
Take 2 or 3 rubber bands, depends on the thickness. The rubber bands go through the hole on the propeller and goes inside the boat and then out on the front (see the second picture). The clearance is small for the propeller, if you have…
- Downloads
- 145
- Likes
- 23
- Rating
- 4.33
P
PrintablesNagyBig
4 g Minimal Soft Boiled Egg Holder
Printed with layer height 0.2, no suport.
- Downloads
- 143
- Likes
- 14
- Rating
- 5
P
PrintablesNagyBig
Centipede - RimWorld
The body needs no support, the head does. I found the best was to print the head is in this orientation, see on the pic 3. If you find a better way go with it. Be careful with scaling, the clearance between the head and body also scales.
- Downloads
- 142
- Likes
- 40
- Rating
- 5
P
PrintablesNagyBig
For Silk Filament, Wine Bottle holder
The seam on silk filament prints are never that nice. Here you can put the seam on the sharp corners where it's not so disturbing and visible. It is possible to print on a 220x220 mm bed, you have to turn it just a little bit. Be aware if…
- Downloads
- 141
- Likes
- 40
- Rating
- 0
P
PrintablesNagyBig
Chocolate bar Ornament, Earrings
Decoration, could be used as earrings
- Downloads
- 136
- Likes
- 15
- Rating
- 0
P
PrintablesNagyBig
Hair Claw with interchangeable deco
Make your own mod, there is a file for the right size of insert. I will make some also very soon. You need just a rubber band. Print with supports.
- Downloads
- 134
- Likes
- 20
- Rating
- 0
P
PrintablesNagyBig
Nose Bone
Nose bone costume accessory, no special settings.
- Downloads
- 118
- Likes
- 23
- Rating
- 0
P
PrintablesNagyBig
Mic Shower Head
Your slicer will beg you to use supports, but it was meant to be printed without supports. I printed with a layer pause and filament change at layer 584 (at 0.2 layer height). Compatible with mini printers. Enjoy!
- Downloads
- 111
- Likes
- 23
- Rating
- 0
P
PrintablesNagyBig
Frog Lady
Printed with 0.12 layer height, no support needed.
- Downloads
- 108
- Likes
- 24
- Rating
- 5
P
PrintablesNagyBig
Jigsaw puzzle for the blind? TEST
I would like to test this, but i don't know any blind person. Help me, if you know someone give it as a gift and give me feedback :) If you have problem with the elephant foot , use raft.
- Downloads
- 105
- Likes
- 23
- Rating
- 5
P
PrintablesNagyBig
Wind Scurly Wurly
Print in Vase mode. There are holes on the bottom for a thin thread to hang it. If you are using new Cura turn off the “Remove All Holes” setting. If the holes are still getting filled then play with bottom layers in your slicer. I have…
- Downloads
- 105
- Likes
- 24
- Rating
- 5
P
PrintablesNagyBig
Meditation sculpt planter/container
Printed with 0.2 layer height, no supports needed.
- Downloads
- 104
- Likes
- 23
- Rating
- 0
P
PrintablesNagyBig
Minimalist glasses holder
There are guides on the stand prints for easier alignment. Enjoy!
- Downloads
- 104
- Likes
- 26
- Rating
- 5
P
PrintablesNagyBig
Ornamental Battle Axe
I printed with 0.2 layer height No support needed Broom handle 28 mm diameter There are holes for 8 screws Glue the plucks over the screw heads Glue bottom bottom
- Downloads
- 98
- Likes
- 50
- Rating
- 0
P
PrintablesNagyBig
Dancing Spinning Top kitcard
A kitcard with a spinning top. Spins 10 - 15 sec for me. No special settings, 0.2 layer height, 0.4 layer width.
- Downloads
- 96
- Likes
- 12
- Rating
- 5
P
PrintablesNagyBig
Cooking pot ornament
Part 4 of my unusual Christmas ornaments. No support needed
- Downloads
- 93
- Likes
- 13
- Rating
- 0
P
PrintablesNagyBig
Spelopede Insectoid - RimWorld
Support on the front. Scale it as you wish. Cheers!
- Downloads
- 92
- Likes
- 27
- Rating
- 5
P
PrintablesNagyBig
Peeking cat for windows
I made this to place it on the corner of my window, works well sideways too. Scale in the z axis to make it stand alone.
- Downloads
- 88
- Likes
- 15
- Rating
- 0
P
PrintablesNagyBig
Megaspider Insectoid - Rimworld
The focus was on aesthetics and scalability and not on printability. The model needs a lot of support and support removal is not the easiest. If you decide to print it make sure first that your support settings are on the point. Cheers!
- Downloads
- 87
- Likes
- 20
- Rating
- 0
P
PrintablesNagyBig
Slice of Cake
Just one slice of cake, not possible to build a full cake with the slices...
- Downloads
- 84
- Likes
- 12
- Rating
- 0
P
PrintablesNagyBig
Cloud Wine Holder
Cloud shape and holds your wine bottle horizontal.
- Downloads
- 84
- Likes
- 20
- Rating
- 4
P
PrintablesNagyBig
Surprise Pop Up heart
0.2 layer height, no supports Filament (1.75 mm) hinges and spring You will need a speck of super glue to hold the filament spring in place. Try it out! Making the spring need some practice, don't be discouraged!
- Downloads
- 82
- Likes
- 27
- Rating
- 0
P
PrintablesNagyBig
Sea star shower head
For home or for travel, should fit to standard EU showers. I don't know if it's the same for the US. Standard settings, needs just little bit of support.
- Downloads
- 81
- Likes
- 14
- Rating
- 0
P
PrintablesNagyBig
Rubber band mid print, Bracelet
In this style of bracelet there is 2 rubber bands with 50 mm diameter. I paused the print with my 0.2 layer height at layer 32 and 65. Try it out!
- Downloads
- 76
- Likes
- 42
- Rating
- 0
P
PrintablesNagyBig
Ultra Light Armor Concept
The arm band is from another project, check that out: https://www.printables.com/model/416823-bigbelt-rubber-band-integration Read the information about the belt, ask if something is not clear. The armor plate is 0.8 mm thick so if you…
- Downloads
- 71
- Likes
- 28
- Rating
- 0
P
PrintablesNagyBig
Megascarab Insectoid - RimWorld
No support needed. Scale it as you wish. Cheers!
- Downloads
- 71
- Likes
- 21
- Rating
- 0
P
PrintablesNagyBig
Astrojax, quick gift
Quick print, 0.2 layer height. There is a cut on one side so if you set the seam position to x=0 and y=0 relative to the model the seam will be on the inside and not visible. You will need a string, around an arm length and have knots on…
- Downloads
- 70
- Likes
- 15
- Rating
- 0
P
PrintablesNagyBig
Moza
Print in Vase mode. There are holes on the bottom for a thin thread to hang it. If you are using new Cura turn off the “Remove All Holes” setting. If the holes are still getting filled then play with bottom layers in your slicer. I have…
- Downloads
- 68
- Likes
- 14
- Rating
- 5
P
PrintablesNagyBig
Avocado seed sprouter
Compatible with many containers, simple and fast print, enjoy!
- Downloads
- 58
- Likes
- 17
- Rating
- 5
P
PrintablesNagyBig
Warg - RimWorld
The best way i found to print is in this orientation, still needs support under the head and a little under the body. Cheers!
- Downloads
- 58
- Likes
- 21
- Rating
- 0
P
PrintablesNagyBig
Digging claw
Fast print, no supports it's really not a big deal. It is sized for my fingers so if it doesn't fit for you, you can scale it. One of the files are a single and for the biggest (middle) finger. Print that first and remember the % you…
- Downloads
- 56
- Likes
- 26
- Rating
- 0
P
PrintablesNagyBig
Sprinter
Never use it with real candles! It's made for electric candles. 0.2 layer height, 0.4 layer width Took me around 20 hours to print. For the best fit use the setting “Slicing Tolerance” Exclusive in Cura. I designed this as a part of…
- Downloads
- 56
- Likes
- 17
- Rating
- 0
P
PrintablesNagyBig
Mini Kick toy
The upper part of the mannequin is for my Patreons only. The toy is functional without it. I printed with 0.12 layer height, no supports needed. The rubber band in the video is also not really necessary, it's just feels better with it.…
- Downloads
- 47
- Likes
- 17
- Rating
- 4
P
PrintablesNagyBig
Fast Scurly Wurly
Print in Vase mode. There are holes on the bottom for a thin thread to hang it. If you are using new Cura turn off the “Remove All Holes” setting. If the holes are still getting filled then play with bottom layers in your slicer. I have…
- Downloads
- 47
- Likes
- 12
- Rating
- 5
P
PrintablesNagyBig
Two Handed Hammer or Axe
Video: https://www.reddit.com/r/3Dprinting/comments/1jzu1v4/turns_out_you_can_make_a_decent_size_two_handed/ Two Handed Hammer or Axe printed from 1.1 kg of filament, You will need a 1 meter long 2 cm diameter stick too. Use 1% infill and…
- Downloads
- 44
- Likes
- 20
- Rating
- 3
P
PrintablesNagyBig
Wine bottle stand
Printed with 0.2 layer height.Great additional touch to a wine present.
- Downloads
- 44
- Likes
- 4
- Rating
- 0
P
PrintablesNagyBig
8 Slot pill holder, for meds every 2 hours
Printed with 0.2 layer height, no special settings. You can hide the seam on the sleeve by placing it on the back.
- Downloads
- 43
- Likes
- 4
- Rating
- 0
P
PrintablesNagyBig
Man cave corner crystals
I could't embed this short video. You should check it: https://youtube.com/shorts/RI74rrwPlIU Print in one then you can separate the two parts and paint it as you want. There is a hole for one screw to mount it to the ceiling. My…
- Downloads
- 36
- Likes
- 11
- Rating
- 0
P
PrintablesNagyBig
Moring Bouquet Fried egg flowers
Parts were printed with 0.12 layer height. Glued together. Note that the stems of the “flowers” are just filament straight from the spool and straightened in hot water.
- Downloads
- 35
- Likes
- 22
- Rating
- 0
P
PrintablesNagyBig
Warcasket - RimWorld
Printed with 0.12 mm layer height. Supports needed.
- Downloads
- 33
- Likes
- 13
- Rating
- 0
P
PrintablesNagyBig
Cookie Christmas Ornament, Prop. Spitzbuben
2 color change, Christmas cookie Spitzbuben
- Downloads
- 31
- Likes
- 13
- Rating
- 0
P
PrintablesNagyBig
Saucer light
Printed with 0.2 layer height but with 0.12 would be even better. No support needed. I experimented with putting a very small pyramid incense in it, worked well and nothing got too hot in there. But I do not recommend doing so being a…
- Downloads
- 31
- Likes
- 6
- Rating
- 0
P
PrintablesNagyBig
Filament spring Googly glasses
Filament springs and hinges (1.75 mm), the video above shows the making of the spring. This video is from another project but the idea is the same. Try it out! Making the spring need some practice, don't be discouraged! You need some glue…
- Downloads
- 25
- Likes
- 15
- Rating
- 5
P
PrintablesNagyBig
Wineglass marker card
Tired of losing track of your wineglass at gatherings or struggling to remember whose glass is whose? Then this is for you!
- Downloads
- 23
- Likes
- 7
- Rating
- 5
P
PrintablesNagyBig
Banana Rack
Screw or nail to the wall, kitchen or in your office whatever. Enjoy!
- Downloads
- 20
- Likes
- 7
- Rating
- 5
P
PrintablesNagyBig
BigBelt, Rubber band integration
Printed with 0.2 layer height. The regular segments were paused at layer 25, insert a rubber band with a diameter of 60 mm. The segments are connected with a filament hinge (1.75). I printed 7 segments to fit around my waist. But you can…
- Downloads
- 19
- Likes
- 4
- Rating
- 0
