100 models
A small can opener that you can also use to close the can that no bees or instects find their way into your nice and cooled beverage. Use custome supports in the blue marked areas. If you like to, check out my other designs too!
The rough plan: A glove that tracks the movements of the hand and then sends it via WiFi to a Raspberry Pi, which runs a program that then displays a visualization and transmits the movements of the hand in real time. Accurate execution:…
This is a small design for my 3D printer. I wanted to be sure that my LED strips would hold, because I doesn't trust the tape side. So this a very small easy and fast print. dimensions: 10mm_2,7mm_15mm for the led strip I used Link for…
Changelog: 06.08.2023 Bigger Lid for MTG cards with higher sleeves Added the MTG Logo to the lid Added MTG logos to the separators Added a small space in the Front for notes if you have multiple boxes If you like to, check out my other…
A file to create your own custom filament box. I needed this for a foldable 3D printer that I wanted to carry around. I hope you can do something with this file. Furthermore, I had a lot of iterations on this project, but I had to stop…
A redesigned hair drain stopper was developed to replace an original component that had gradually degraded after over 40 years of use. The component was designed for additive manufacturing and 3D-printed, allowing rapid iteration and…
A small cookie cutter of the Lord of the Rings ring, because I couldn't find one online I had to design one by myself. If you like to, check out my other designs too!
A small keychain with your own blood type for emergencies. Inside is an NFC chip with further emergency information such as emergency number, whether you are an organ donor, your name and previous illnesses. You Need: NFC Tag Key chains I…
A small 3D print to be able to fix a Nvidia Jetson Orion Nano to a Din rail. Super easy and fast print. If you like to, check out my other designs too!
For our book presentation, we chose the book Flugangst by Sebastian Fitzik. We were then asked to build, develop, and plan something related to the book. We decided on the airplane from the book, because it made the most sense to us.…
The reverse lever for the Singer 8280. The lever always breaks on my mother's singer, so I had to make one that will not break. I added a filament switch to reuse the original metal part in my design. If you like to, check out my other…
This is a small prototype I did for a university project. I used filament splines as "screws". I only printed the none steering axe. Maybe you can use it. I hope you like it and can maybe do something with it. You need: name: count: 7*3*3…
This is my little design of a shopping cart coin I designed for a friend of mine. Maybe you need some shopping cart coin If you like to, check out my other designs too!
An Arduino pro micro project to control volume or mute the sound. You also use rgb to have a nice experience. Regular Mode: Animation-Modes: Assembly of the Volume Knob V2 This instruction is for those interested in assembling the Volume…
Customize the Print We only to change the mainbody and the case for the usb stick. First we adjust the case for the usb stick. Take both parts and copy each. Now cut for each part the top and the bottom part away. You have to choose how…
A small design for a keychain. You can use my file for printing, there are all the swaps already included. For the chain, I used this . I also included a little hole where you can put on of this NFC-Tags to store data. Insert the NFC Chip…
If you like to, check out my other designs too!
This is a small mold for a ceramic cup that I designed and fabricated. The mold is made from plaster, which allows you to cast ceramic slip inside to create the final cup. A crucial step in the process is preparing the 3D-printed master…
A super simple design for a loom. I made the file so simple that it's possible to 3D print the parts or use a lasercutter My inspiration for this build was my childhood. We always used these things in our kinder garden, and I recently saw…
I really liked the design but wanted to make some add-ons to make the build a little bit easier. I added: the DXF file to directly cut the plate for the main Plate with a super cool spirit level I used TPU for the power transmission. I…
Chi Iphone case. If you like to, check out my other designs too!
A small redesign of the engineering meme. Saw the design on the internet, but there you had to pay for the .dxf files, so I thought that I should create my own version for free. You only need 4 some small srews for the wall if you want to…
When do you need it: We used this compass in a scouting game for the kids to find the next station. What you need: something that floats on water and can support the weight of a needle, for instance cork from a wine bottle needle magnet…
A small box for the TS-100 and Omnifixo. I tried to use as much space as possible to store useful soldering tools. Features: A magnetic and removable soldering iron holder. In addition, the holder has the ability to stabilize small boards…
A small plate to be able to vacuum form at home for my own projects. You can 3D print the main frame and laser or cut the hole plate. If you like to, check out my other designs too!
This is a small project I did for our scouts. I printed around 150 crown for 150 scouts. I hope you like the design or can improve on it. If you like to, check out my other designs too!
This is a storage container for your notes, buisness cards, usb sticks or some small 3D prints. If you like to, check out my other designs too!
Only a remix of the E3d mount you can find in the assembly instructions. I didn't have the Revo Micro on me yet to test the print, but I already printed the parts. I was to hyped for the Revo, so I had to design something for it.…
A small plectrum shaped like a shield to improve strength If you like to, check out my other designs too!
The second version of my car phone holder. This time, the phone is held on by a small magnet. Why did I use a regular vent phoneholder? I hate these things, the car vents of my are moving up and down, so the holder get used up and at some…
This is a small design for the regular rgb remote control. If you found this useful, please donate what you think it is worth to my paypal.me . Help cover the time of design. Thanks, Enjoy! If you like to, check out my other designs too!
I have designed a Wera Tool-Check PLUS holder that I use to organize my tools in an Ikea cabinet. Despite the poor quality of the wood, the holder's screws hold well. However, the glow-in-the-dark feature is not very visible because the…
Hello builders, that is my redesign of the British army's original Mark IV tank from WWI. I hope you enjoy it. I designed this robot for half a year. It was my first thing I ever designed. I had a lot of setbacks, but I finally made it. I…
Broken Marvel Logo If you like to, check out my other designs too!
Fusion Link to see the thing: https://a360.co/3MaR7id If you like to, check out my other designs too!
I added a small bevel of 10 mm to the weakest spot on the propeller, because this was mostly the spot where it broke. I really tested the thing. We produced 30 of them in our Makerspace and I hit so many against the wall or the ceiling.…
Volume-Knob A arduino pro micro project with a rotary encoder to controll volume or mute the sound Not the best idea to use LEDs and not a ring pcb but with some Hot Glue I could fix it. Video What do you need Arduino Pro Micro:…
Hello reader, this is my little fake bomb for adventure games or for fun. I actually designed this for a boy's scout game but I thought maybe this fake bomb would be helpful to some people, for instance for birthday parties or only plain…
This is a small design for an IKEA trofast box for your 3d printing accecories. two layers You can store in Filler: an UHU Glue stick, Nozzle cleaner(this thin metall things you can get ride of cloges in your nozzle) a bottle of bearing…
I wanted a piggy bank for the beer cash desk. I scaled my file to 150% and added plastic plastic sheet with hot glue to keep the money inplace. If you like to, check out my other designs too!
A small design to test the tolerances of the printer. If you like to, check out my other designs too!
Arc-Overhang-Testprint to test the capabilities of the new slicer add-on. I used this add-on for PrusaSlicer to get the gecode generated. Algorithm inner working: Example G-Code files: Image Credit: stmcculloch/arc-overhang If you like…
This is a metall 3D printed hexasphericon I 3d printed, but it also will work with plastic. If you like to, check out my other designs too!
I used the Tutorial from CNC Kitchen. I hope you like it. If you like to, check out my other designs too!
16 x 4.5 mm ball bearing 4 x M3x8mm srews Ordered this one: But be careful mine was send open. So I had to pick up a lot of balls. If you like to, check out my other designs too!
A lightweight version of the Voron V0.1 Axis. I was inspired by Premiumbasics and his ultra light Axis. I wanted to try out what I can do by myself. I designed the axis in Fusion360 First Test: What do you need: 15*15*200 mm with 2 mm…
This is a part of my 3d printed LDR system in my room to check day or night. With this I controll all. If you like to, check out my other designs too!
I liked the idea but want to have one for SD and Mircro SD Cards. That's the whole story. If you like to, check out my other designs too!
Hello readers this is a small project I had done over the weekend. I needed a magnaeic stirrer at work, but because of some circumstances we couldn't order one. So I thought why shouldn't I build one by myself. I designed this thing with…
A small Doom Logo If you like to, check out my other designs too!
This is a small holder for the WemosS2Mini which secures the board and raises it up 6.5mm. You need two M2 screws to screw the board into the mount, I'm using it as a threw mount that's why the holes go all the way through the model. If…
A small and easy build for every MTG Player with a laser cuter at hand. You need: 3 mm Wood around 1 m^2 Wood glue (Optional) 3 mm clear acrylic for the clear front Lasercut: The information of how often you have to cut a part is written…
I am excited to present my latest 3D design, the Wera KK 27 RA Wallmount. A small holder to fit your wera tools. It also holds your tools in a door, so that the screw driver falls to the ground. Hope you like it. If you like to, check out…
Zahnrad-Raden is a version of Mastermind with gears instead of simple pins. Mastermind or Master Mind is a code -breaking game for two players. [1] [2] It resembles an earlier pencil and paper game called Bulls and Cows that may date back…
A small upgrade to the RGB-strip holder from CGrassin . I designed it for a little bit thicker rgb-strip. Additionally, I added some 3mf tape. If you like to, check out my other designs too!
A small piggybank for our MakerSpace If you like to, check out my other designs too!
This is a small modification of my original model with a better clip for the VWPolo6r and a MagSafe magnet. I used it for my OnePlusNord4 with a special MagSafe case. I also added two rings made out of noctilucent PLA to even see it…
4.5 mm ball bearing Ordered this one: But be careful mine was send open. So I had to pick up a lot of balls. If you like to, check out my other designs too!
A small cookie cutter for a friend of mine. If you like to, check out my other designs too!
This is a small upgrade for the Stepcraft 600. You can add this for added stability. I'm using a roll able table, so it's good if your CNC don't fall down. If you like to, check out my other designs too!
A small add-on for a better fit, because I don't like 3d printed threads. I used a M4 heat insert to get a very solid thread and used an M4 srew for the knebel. Hope you like it. If you like to, check out my other designs too!
A small sign that is for a retirement present. The sign says "THEN I WILL BE AWAY" in german. I made mine on a laser, but also included a 3D printable version. If you like to, check out my other designs too!
A recreation of the popular game code-names with scout words. The box is water tight for the sometimes hard conditions while camping. Printing with double-color: I added the color-change command to the tool-change and to the switching…
A small keychain with the logo of Blind Guardian, a metal band. I used the color change feature of PrusaSlicer to get the two colors. For the chain, I used this . If you like to, check out my other designs too!
A super simple model to make a Christmas ornaments for Electric Callboy with color changes. If you like to, check out my other designs too!
A small design to add side- and a back wall to an Ender5+. It's a super easy and fast upgrade that lets your Ender5+ to look a bit tidied up. No more loss cables that you can directly see. The only thing you have to reposition is the…
A small light that you always know and see where your light switch is. You print the file in glow in the dark filament. I am always happy with the glow in the dark filament from DasFilament . If you like to, check out my other designs too!
A small multicolor edit of the original one. Added the Swedish flag to the molle patch. If you like to, check out my other designs too!
This is an instruction for vacuum forming 3D printed parts to easily create your own chocolate. I have uploaded some 3D files that you can start experimenting. After my files, you should be able to recreate the chocolate forms in your own…
I made this little design for a friend's birthday. She really loved the design. She sadly never won against me. If you like to, check out my other designs too!
If you want to know how you can do it on your own, watch the video, give a like and follow I hope you enjoy it. If you like to, check out my other designs too!
Only a small cookie cutter I created for our scouts. If you like to, check out my other designs too!
My first design. From long ago. This is a Filament storage system. You only need extra, a 24 mm pipe. You can cut it to your wished length. If you like to, check out my other designs too!
This is a small instruction on how to 3D print your brain only with free software at home on your home 3D printer and pc. The file you can find in the print is my own brain I created with this method. You can find all the details you…
This is a small design idea for a birthday present. In my case, I used it as a birthday card, but you can use this technic not only for this specific application, for instance the second picture shows a blood patch. It has an integrated…
A remix of MandicReally design for his spool storage design. I really liked that he added a .DXF file, so I could easily add an extra step in my design. Sadly, the storage isn't enough. I made the wooden round bars 1 meter long, but even…
My second Iron Man Image. If you like to, check out my other designs too!
This was a small birthday present for a friend, that is a little bit addicted to Pokemon Go. If you hold the Tag on your phone back Pokemon Go will be opend or if you havn't installed it you will be guided to the Pokemon Go Store of your…
A small design I did for my German scouts. Printed it on my Bambulabs printer with different thicknesses. Idea: You could print the sign with glow in the dark PLA so all the guitar playing people light up at the camp fire If you like to,…
A small guitar pick with a twist. If you like to, check out my other designs too!
I want to mount a 10 mm thick poster to the wall with small pins at the sloping roof, so I modeled a small part that you can use in each corner and secure it with two srews threw the poster. If you like to, check out my other designs too!
This is a description for building a magic mirror. It costs around 60-70 €. I have always wanted to build a magic mirror but didn't quite have the money since it is around 200 to 300 € for a full-size frame, display and mirror. So, I…
A small coffee spoon with edible text
A small stand I created. Everything should fit very tight. I created perfectly for the laser cutter. I created the files so that I didn't have to use any glue. If you like to, check out my other designs too!
This is Thanos in 2d 3d art. If you like to, check out my other designs too!
Graduation coin for my graduation class If you like to, check out my other designs too!
A custom game we made for the different stages that you go through as a DPSG scout. Printing with double-color: I added the color-change command to the tool-change and to the switching between objects. I also added a second extruder.…
I designed a plate to store my spare bearing from this design The design has two holes for the hole spacing in our drawer For which kind of bearings is this Plate: 624ZZ Ball Bearings 606ZZ Ball Bearings 608ZZ Ball Bearings If you like…
What is this? This is a cooler to bring your beer or beverage to the correct temperature after a short time of 2–3 minutes. Why should you build it? You forgot to put the beer in the fridge and have a really hot day and don't want to wait…
New Icon Design If you like to, check out my other designs too!
An attachment for the TS-100 Case from Bevcan. The TS 100 had some space to move and I'm taking my TS-100 all around with me in my bag. So I thought it would be nicer if the TS-100 has a fixed position. So I designed this small TPU part…
A simple table that you can disassemble and put together without glue. Here you can see the 3D model in Fusion360 Browser https://a360.co/3PLuxhM If you like to, check out my other designs too!
Super nice looking tophat panels for the new V0.2 Tophat I lasered into a 3 mm sheet of acrylic glass. I found the acrylic glass here . If you like to, check out my other designs too!
The problem: Everybody is familiar with the situation when you want to go out and take your in-ear headphones with you. Most of the times you open your drawer and find tangled headphone cables, so you must untangle them in order find a…
A design for the Prusa Mini and regular Prusa Steel Beds If you like to, check out my other designs too!
A small design to hold my DVD Drive at the right position on the top of my pc.The small have to be 3D printed mirrored. If you like to, check out my other designs too!
Only a small remix for T-Nut Extrusion If you like to, check out my other designs too!
Design A simple clip-in casing for a coin to store it. The coin can be mounted to a backpack. The goal was to be able to store the coin without using glue or drilling a hole. Modify I also added the Fusion360 file with parameters for…
A small keychain with the logo/name of Hammer Fall a metal band. I used the color change feature of PrusaSlicer to get the two colors. For the chain, I used this . If you like to, check out my other designs too!
A Cable Add-On to Communicate with Proprietary Mahr Hardware from 2000: The Mahr Extramess 2001 Hardware Setup We used two main hardware components: ESP32-C3 Super Mini A compact and inexpensive microcontroller that supports USB and UART…
