P
PrintablesLow-Z
RC servo connector retaining clip
RC servo connector retaining clip. printed in PETG in upright (I) orientation without supports.
- Downloads
- 270
- Likes
- 19
- Rating
- 5
All models
Counting matching models…
P
PrintablesLow-Z
18650 banana plug breakout
This is a dummy 18650 battery with banana jacks for charging other 1s lipos. You need: two small screws two 4mm banana jacks some copper wire Both screws serve as battery contact. You may have to cut the banana jack soldering connections…
- Downloads
- 209
- Likes
- 53
- Rating
- 4
P
PrintablesLow-Z
weed shopping cart / trolley coin / token (1€ size)
weed token for shopping trolley
- Downloads
- 207
- Likes
- 31
- Rating
- 4.5
P
PrintablesLow-Z
adjustable table leg leveling foot
this is an adjustable table leg leveling foot for round metal table legs with inner diameter id=48mm and outer diameter od=51mm feel free to modify the attached openscad file for your needs. you will need an M10 hex screw and an M10 hex…
- Downloads
- 193
- Likes
- 32
- Rating
- 0
P
PrintablesLow-Z
EWI - electronic wind instrument project shell/case/housing
No, it's not a spacecraft ;-) EWI - electronic wind instrument project shell/case/housing This can be a shell for your individual EWI project. There are several different EWI projects out there on the internet for inspiration. I designed…
- Downloads
- 182
- Likes
- 91
- Rating
- 0
P
PrintablesLow-Z
RC engine starter adapter for cordless drills
With this simple adapter you can use your cordless drill (if it is powerful enough) as an RC methanol engine starter. You will need the commercial available rubber insert. Available as “Gummieinsatz Mitnehmereinsatz Gummi für…
- Downloads
- 174
- Likes
- 10
- Rating
- 0
P
PrintablesLow-Z
stackable spray paint can rack
This is a simple rack for usual spray paint cans. Have fun!
- Downloads
- 155
- Likes
- 20
- Rating
- 5
P
PrintablesLow-Z
cradle / tray for sonoff SNZB-03 motion sensor
cradle for sonoff SNZB-03 motion sensor made with openscad Have fun!
- Downloads
- 145
- Likes
- 17
- Rating
- 5
P
PrintablesLow-Z
hexagonal picture frame
This is a two part hexagonal picture frame. It's outer size is 20cm. So you can cut A4 printed photos to fit in it. Otherwise you can use the slicer scaling function for other dimensions. Or you can modify the openSCAD file accordingly.…
- Downloads
- 132
- Likes
- 30
- Rating
- 0
P
PrintablesLow-Z
Synthibox, a RaspberryPi case for the Zynthian Project, made in OpenSCAD
I designed this case for my Zynthian project. The electronics is partly derived from the V5 with an illuminated and 3D printed button matrix. The needed circuit information is on the Zynthian forum and github pages. I handwired it…
- Downloads
- 127
- Likes
- 25
- Rating
- 0
P
PrintablesLow-Z
OpenSCAD hex nut test print M3 M4
OpenSCAD hex nut test print M3 and M4 to check the right diameter value example code: cylinder(length, diameter, $fn=6);
- Downloads
- 117
- Likes
- 8
- Rating
- 0
P
PrintablesLow-Z
battery compartment lid for MB Senso / Simon
replacement battery compartment lid for MB Senso / Simon to be printed with support
- Downloads
- 109
- Likes
- 2
- Rating
- 0
P
PrintablesLow-Z
Raspberry 7 inch touch display design enclosure made in OpenSCAD
I designed this Raspberry 7 inch touch display design housing for my piCorePlayer project. Therefore the back plate can be populated with: micro-USB break out board (two different sizes are possible) two cinch sockets for audio output an…
- Downloads
- 108
- Likes
- 12
- Rating
- 0
P
PrintablesLow-Z
pogo pin pcb clamp
It's a simple pogo pin clamp for programming iot devices. What's needed: 3D printed parts 2x 2.9x5 mm self tapping pan head screws 2x 2.5x10mm screw with nut 1x spring PCB perf board pogo pins I printed mine in PETG. Have fun!
- Downloads
- 83
- Likes
- 12
- Rating
- 0
P
PrintablesLow-Z
smart meter D0 opto sensor case
This fits on smartmeters with D0 opto interface. As an example you can use a wemos D1 mini flashed with tasmota firmware for forwarding the SML messages to your smart home solution. What you need: wemos d1 mini, infrared sensor as innards…
- Downloads
- 77
- Likes
- 3
- Rating
- 0
P
PrintablesLow-Z
Handle for TS100 soldering iron
If you get stressed by pain in your fingers you can use this handle to make using the TS100 more convenient. This part fits between heating element and original handle and is secured by screwing the heating element tight. Printing in PETG…
- Downloads
- 69
- Likes
- 14
- Rating
- 4.33
P
PrintablesLow-Z
Air purifier for Medion filter
This is a simple air purifier i designed for my office. I printed all parts in PETG. The size fits for the below mentioned Medion Filter. The carbon part of this filter is very thin and not lasting long. Feel free to find a better one of…
- Downloads
- 67
- Likes
- 13
- Rating
- 0
P
PrintablesLow-Z
18cm/7inch audio tape reel mmu or single color print created in OpenSCAD
This is my try to create 18cm/7inch audio tape reels. There are stl-files attache for different designs (0,2,7). The 3mf-files are a selection of designs i put together on two print plates each. If you want to print the non preconverted…
- Downloads
- 62
- Likes
- 6
- Rating
- 0
P
PrintablesLow-Z
corona servo wing mount
this mounting cassette is designed for corona 239 wing servos. it may also fit for counterfeits.
- Downloads
- 55
- Likes
- 2
- Rating
- 0
P
PrintablesLow-Z
Filament Spool Drum Sorter with *click* Interlock Mechanism
This is a simple filament spool drum sorter with interlock mechanism without magnets or other additional mechanical parts. The latching mechanism is directly added to the tray. There are files for one, two, three and four bin trays…
- Downloads
- 51
- Likes
- 13
- Rating
- 4
P
PrintablesLow-Z
hitch ball ultra sonic cloaking cap
I designed this cap to suppress false alerts from the parking distance sensor after mounting an aftermarket tow-bar. This cap stops the ultrasonic waves to travel back to the sensor. They will be scattered in the wild… Printing this part…
- Downloads
- 40
- Likes
- 2
- Rating
- 5
P
PrintablesLow-Z
Fujitsu Futro S740 SSD HDD mounting bracket
This is a SSD/HDD mounting bracket for Fujitsu Futro S740 thin clients. It is used to mount the drive in the case, connected with a SATA/USB cable that is pulled through the USB-C opening. It might be useful to shorten the mounting tab on…
- Downloads
- 39
- Likes
- 1
- Rating
- 0
P
PrintablesLow-Z
Undercover Window Sensor Project Box for single AA Battery
This is a design for undercover/hidden window sensors. They fit in the frame of our plastic windows. The electronics are from the mysensors project. But it may fit yours as well. You will find the openscad file attached. So you can tweak…
- Downloads
- 36
- Likes
- 5
- Rating
- 0
P
PrintablesLow-Z
Stackable Filament Spool Drum Sorter with *click* Interlock Mechanism
Here are some additional parts to build a parts carousel of my filament spool drum sorters. A loose stack can be built from the parts. Alternatively, the stack can be stiffened up with an M10 threaded rod and some M10 nuts. The M10…
- Downloads
- 32
- Likes
- 7
- Rating
- 0
P
PrintablesLow-Z
tripod cradle for Zoom H4
This cradle is for mounting the Zoom H4 recorder on photo tripods. What you need: 4 self tapping screws (see photo) tripod socket (see photo) rubber bands or hook-and-loop straps The tripod threaded insert has to be mounted with help of a…
- Downloads
- 31
- Likes
- 4
- Rating
- 0
P
PrintablesLow-Z
"Hamburger Mattenfilter" frame 200mm diameter
This is a frame for a 30mm filter mat. Filter dimensions are 50cm height and 20cm diameter. The needed mat size is about 50x60cm. The parts are printed in PETG and glued together with hot glue. OpenSCAD files attached. A smaller version…
- Downloads
- 29
- Likes
- 2
- Rating
- 0
P
PrintablesLow-Z
simple c920 web cam blind
simple c920 web cam blind slider, no bells and whistles. printed in transparent PET. openscad file also uploaded. Have fun!
- Downloads
- 29
- Likes
- 2
- Rating
- 5
P
PrintablesLow-Z
facecloth hook for 17mm shower slide bars
This is a quick and dirty hook for shower slide bars of 17mm diameter. Not very pretty but a working solution. For other rod diameters you easily can resize it in your slicer software. Have fun!
- Downloads
- 28
- Likes
- 1
- Rating
- 0
P
PrintablesLow-Z
cat litter or baby diaper bucket plastic bag helper
This is a plastic bag adapter ring for cat litter or baby diaper buckets. You have to fix the outer part with 4 small self tapping screws to the bucket. Then you can use simple plastic bags for collecting litter. Have fun!
- Downloads
- 28
- Likes
- 12
- Rating
- 5
P
PrintablesLow-Z
Big Rocker Switch
This is a big rocker switch. The switching element is a industrial micro switch. You will need: 2 pan head self tapping screws 2.2x10 2 pan head self tapping screws 2.2x12 2 pan head self tapping screws 2.2x5 2 round neodym magnets 5x2 1…
- Downloads
- 26
- Likes
- 9
- Rating
- 0
P
PrintablesLow-Z
"Hamburger Mattenfilter" frame 170mm diameter
This is the 170mm diameter version from my bigger filter: https://www.printables.com/model/1030245-hamburger-mattenfilter-frame-200mm-diameter The needed mat size is 50x50cm.
- Downloads
- 24
- Likes
- 3
- Rating
- 0
P
PrintablesLow-Z
Undercover Window Sensor Project Box for two AA Batteries
This is a design for undercover window sensors. They fit in the frame of our plastic windows. The electronics are from the mysensors project. But it may fit yours as well. You will find the openscad file attached. So you can tweak the…
- Downloads
- 22
- Likes
- 6
- Rating
- 0
P
PrintablesLow-Z
Toroid mounting plate for Euro Box enclosure
This is a simple toroid transformer mounting plate for the cheap Euro Box enclosures i have been using everywhere. The plate will be mounted with self tapping screws, the toroid with cable ties.
- Downloads
- 21
- Likes
- 2
- Rating
- 0
P
PrintablesLow-Z
Lack enclosure PSU cooling chimney
I designed this passive cooling Lack enclosure PSU chimney to have a solution not to unmount the PSU from my i3 mk3. the chimney is bolted down to the base plate. you have to cut the side panel twice in width. one part is about 80mm, the…
- Downloads
- 20
- Likes
- 7
- Rating
- 0
P
PrintablesLow-Z
MPX 3000 series RF module container
I designed this for my Multiplex 3030 2.4GHz Spektrum conversion. I hope this fits your needs. Have fun!
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
PrintablesLow-Z
led matrix display housing
I needed a display with buttons for my home control installation. Inspired by the wonderful Xronos clock project I designed my own version. The original one is not available any more. In the inside an ESP8266 and eight 32mm matrix display…
- Downloads
- 19
- Likes
- 5
- Rating
- 0
P
PrintablesLow-Z
EURO-BOX PiCorePlayer face and mounting plate
EURO-BOX PiCorePlayer face and mounting plate for Raspberry Pi 1. I designed this to give all my old Raspberry Pi1 number crunchers a last mission :-) There are different back plates for different connectors. Choose well.
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
PrintablesLow-Z
stepper motor position modification for isel ep 1090 cnc router
stepper motor position modification for isel ep 1090 cnc router. to make the router a little smaller and less space consuming I designed this gearbox. i printed this in PETG because of its temp resistance with100% infill. stiffer material…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesLow-Z
FT736 dial rubber
FT736 spare rubber ring for frequency dial. To be printed in TPU. Have fun!
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
PrintablesLow-Z
Latch for Olympia Carina Typewriter Case
Spare case latch for Olympia Carina typewriter. Have fun!
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
PrintablesLow-Z
interconnection bar for hexagonal light organ enclosures
If you have bought your light organ second hand or have lost the interconnection bars, this is the stl file for printing these yourself. Have fun!
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesLow-Z
Raspi printserver for HP MIO slot
I created this Raspi printserver HP MIO slot card for my old Designjet 750c to substitute the RJ45 printserver with a wireless option power comes from the internal MIO connector 5V pins data connection is done via USB to parallel cable I…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesLow-Z
beater adapter for gt ice cream machine
I have lost the beater adapter for my ice making machine. So here is a spare part for this. I printed it in ABS. For best strength it is needed to print it horizontally on the print bed. The shape is especially designed for this…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesLow-Z
HT50 Venting Valve
Simple venting valve for HT50 tubing. I designed this to suppress the annoying gurgling noise when our drain pump switches off. This was my first print with my mk3 years ago. So I think i used the silver PLA shipped with the printer. It…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
These are all currently available results.