All models

spool holder

you need : 4x bearings (the same as the ones in the last picture) 4x M4 nuts 4x M4x16 allen screws print 2x the rail print 4x the spool holder

diameter gauge

Find the diameter of parts by successive tests on the gauge as in the image below: The numbers on the gauge are the diameters and range from 2 to 15mm.

Formula 1 keychain

change the colors to the right layers

cable storage box

print the two pieces of the box (bottom and top) insert a piece of filament in the holes to make the hinge heat the tip of the filament and press with a flat surface to prevent the part from coming out of the hinge. Example of the result…

2.5" SSD case

The case is designed for 2.5" SSDs according to the dimensions below: The case preserves access to the mounting holes : Printing is done without supports and in the orientation below : Assembly is done without screws or glue but by…

Horten Ho-229

I recommend activating the border for printing because of the height of the model. I used maxim sachs' stl file found on thingiverse and made some modifications: - MK108 guns removed : - wingtip antennas removed : I noticed mesh bugs as…

simple diamond

Print it in vase mode for a better result !

radius gauge

find the radius of curves by successive tests on the gauge as in the image below : The numbers on the gauge are the radius and range from 2 to 15mm. I recommand to print it in 0,15mm layer height and enable ironing for a better result You…

cable protector

1] print the cable protector according to the diameter of your cable (2.5 / 3 / 4.5) 2] break the base : 3] insert your cable printing tip : print at 200°C (for PLA) activate the fan

Arduino Leonardo case

Arduino Leonardo case

mini vise

Assembly : Before assembling, go back and forth between the jaws several times to smooth a bit the surface as shown in the image below: Parts identification : Printing tips : for the jaws, I recommend printing them at 45° as shown in the…

Nike Air Tn logo keychain

A single extruder Tn logo

apex coin

change the colors to the right layers

Paraglider brake handle

Print 4 times the piece add M4 bolts screw 2 parts together with the brake line between them with M4 screw.

Raspberry Pi keychain

change the colors to the right layers

Metric gauge for screws / bolts

⚠ don't change the scale

BMW hood logo

This bmw emblem has a diameter of 82mm to fit in the front hood. I recommand to print it in 0.15mm layer height. You need to do 3 color change at the layer 14 , 17 and 20 according to the following diagram : ⚠ WARNING ⚠ if you change the…

stepper motor mount (nema 17)

before printing, check that your motor is a nema 17

leaf soap dish

the "leaf_soap_dish_VF.stl" has holes to drain the soap as shown in the picture : the “leaf_soap_dish_with_ground_VF.stl” has a ground to not have contact between water and the surface but allows the draining of the soap :

split fang link

system of links to couple two ropes together used in paragliding, particularly for the speed system. This 3D version can be used for low stress applications. For more demanding applications, you can make them in metal from the sketch in…

twisted beehive coaster

This coaster protects the table from condensation and have a great design. You can put all glasses up to 70mm diameter, exceed this size, you can put the coasters together to increase the surface : Printing I recommand to print it in…

multi tool parking disc

ASSEMBLY 1] print the case 1 2] print the gauge and put it in the rail 3] print the disc and put it in the middle 4] print the case 2 close the case TIRE LEVEL the orange line with the "S" for summer is the recommended limit for summer…

apex coin keychain

change the colors to the right layers

Protective Lighter Case

This protective lighter case was designed to stop the gas button from being unintentionally pressed when the lighter is stored in a pocket, backpack, or any tight space. Right after printing, the assembly may feel quite tight, but after a…

power cable hook

cable hook with engraved lightning sign for M5 screws can be used on aluminum profiles print it this way :

spherical paragliding break handle

This design is installable without the need to untie the brake handle and does not damage your lines but the installation is a bit tricky. you will need two M3x14mm hexagon socket head cap screws and two M3 nuts. to insert the nuts I used…

dry box

print each part enfill the box with silica gel packets ⚠ you may have to enlarge the holes with a drill

universal soap dish

This highly drained soap dish can hold almost every soaps (max 64x94mm). I recommend using PET/PETG to print this design because it has good water resistance. Here are the dimensions : (real photos to come…)

Chain Fork

I recommend adding supports at the start and end of the model and enabling the skirt : This design is inspired by the ‘The Uncomfortable’ collection by Katerina Kamprani

paragliding sim controller

This simple controller consists of two linear potentiometers that can simulate the brakes of a paraglider in a simulator like the one made by Evan Burrows : https://evan-burrows.itch.io/paragliding-sim hardware : 1x Arduino Leonardo 1x…

dry box

print each part enfill the box with silica gel packets ⚠ you may have to enlarge the holes with a drill

Graphic plotter

save time plotting graphs...

Iron Nest HE Shell

Model variants The version with text has engraved text : Printing Tips The print shown in the images was printed vertically at 50% scale, with a small support structure and some colour changes. The 3MF file containing the settings is…

Camera Lens Filter Adapter 52mm to 37mm

Camera Lens Filter Adapter 52mm to 58mm

Sony RX100 filter adapter

Print out the piece (no supports required) and stick it onto the lens. Two layers of double-sided tape work well for this. You’ll be able to screw 52mm filters onto it. You can use adaptors to fit filters of different sizes :

ACRO SHOW keychain

In the picture I changed the color for the text and I activated the ironing on the last layer

Camera Lens Filter Adapter 52mm to 55mm

Iron Nest AP Shell

Model variants The version with text has engraved text, as shown in the example : The easy to print version has contact with the red part to avoid support : Printing Tips The print shown in the images was printed vertically at 50% scale,…

Iron Nest INCN Shell

Model variants The version with text has engraved text, as shown in the example : Printing Tips The print shown in the images was printed vertically at 50% scale, without supports and with some colour changes. The 3MF file containing the…

Iron Nest STAR Shell

Model variants The version with text has engraved text, as shown in the example : Printing Tips The print shown in the images was printed vertically at 50% scale, with a small support structure and some colour changes. The 3MF file…