Counting matching models…
You will need M4x6x5 heat inserts. If you would like to use something else or screw straight into plastic, there is also a .step provided. M4x10 screws are a perfect match for attaching the stepper drivers but make sure the head isn't too…
This allows you to mount SDS Plus drill bits on the lid of your L-Boxx. Tested on a Bosch L-Boxx 136 G4 but it should also fit the older ones. Depending on how well your printer is able to print edges, you may have to force in a drill bit…
This is a remix of the V0.1 lower bay guard with the stock V0.2 endstop. I made of course some stealthburner-like adaptions :-) Integrated supports which will snap away with a tiny bit of force. It used to be a very tight fit at the left…
Voron V0 V0.1 1515 3x Wago 221-415 Mounts 2x M3x6 SHCS and 2x M3 nuts were sufficient for me. I ordered Wago Ex instead of the regular Wagos because they're white. And they're more useful in case you printer tends to explode.
I used these on my V-Core 3 to mount the DIN Rails without having to drill too many holes into the rails itself. Beside of that, they look pretty neat. My DIN-Rails are “Weidmüller Tragschiene TS 35X7.5 2M/AL/BK 0330800000” I printed…
This is the GLaDOS cam front remixed for RPI Camera V3. Also it uses M2x8 self tapping screws instead. For instructions and further files please use the original model.
Filadryer S1 PTFE fitting with screws I created this because the other PTFE fitting mounts without drilling holes were very flimsy and broke easily. This allows you to add a M6 PTFE fitting to your box which is very rigid and you just…
TOBSUN DC-DC 24V/12V to 5V converter din rail mount Based on the VoronUsers 2 channel relay mount and I also added the unmodified Voron 2 DIN rail clip for your convenience. This fits the DC-DC converters which are e.g. part of the Voron…
Voron V0.1 3x Wago 221-412 mount for the bed heater Based on the Voron V2 / 2020 mounts by Boingomw which you can find at https://github.com/boingomw/VoronUsers/tree/master/printer_mods/Boingomw/Wago_mount Use 2x M3x8 SHCS to secure them.…
You will need two M2x10 self-tapping screws to mount the endstop (for sourcing you can take a look at the Voron 0.1 BOM https://vorondesign.com/sourcing_guide?model=V0.1 ), the existing M3 screws of the lead screw nut can be reused.…
BTT filament sensor backplate with ears This backplate provides 2x M3 holes to mount the filament sensor whereever you want to. In my case, at the back right extrusion of my Voron 0.1. I printed it in eSUN ABS+ with 40% infill so with…
MPCNC Primo 25mm (Type F) squaring helper This helps you on getting your MPCNC Primo squared. You will need a folding rule, I used a Wiha Longlife 37067 made out of composite plastic. You have to adjust the .step that your folding rule…
TLDR; UNPLUG YOUR PRINTER BEFORE DOING ANYTHING ON MAINS VOLTAGE. OTHERWISE THERE IS A 50% CHANCE YOU WILL GET SHOCKED. Even if your printer is switched off, it only may have switched neutral which means you still have a hot phase even if…
These are the XY Joiners made by Vector3D https://github.com/AdamV3D/V-Core-3-Vector3DEdition/tree/main/Printer combined with the clamping mod of MFBS. https://www.thingiverse.com/thing:4947482 I changed the hole size back to 5mm and…
This allows you to mount 15x CNC end mill 13x13mm boxes to your Multiboard. It is 124mm wide and can be mounted next to each other with a gap of about one millimeter. It might a bit tricky to read and reach the back row of end mill boxes,…
I created this C35 Adapter for my DeWalt D26204 based on the existing Makita RT0700 Adapter by chopping off the lower half and replacing that with my design. The newly added part looks a tiny bit shifted on Cura but is fine when printed.…
This is a DIN rail mount for the xbst JST XH 2 pin splitter found at https://github.com/xbst/Random-PCBs/tree/master/XH-Splitter or various vendors. The PCB isn't symmetrical due to the JST XH pin locations, therefore you may have to…
This is a "compact" wall or pegboard holder. It's still very large though. I printed it with 40% lightning infill which only used ~200g filament instead of almost 500g with regular cubic. It's sturdy enough. If you put 2x M4x15 screws…
Please note that according to the CAD model this won't work with V-Core 3.1 because there isn't enough clearance to the lead screw holder next to it. I may adapt it when I update to 3.1 or you just grab the .step and do it yourself. I use…
2024 UPDATE: NOT RECOMMENDED, THE FAN MAY FALL OUT OF THE PRINTED HOUSING, SEE COMMENT This is based on a 5015 housing posted in the Voron Discord by René/Unbruts#0484 which in turn seems to be (not sure on that) based on the…
This is the regular V-Core 3 rear motor mount with a sealing lip and minor adjustments. The sealing lip is on top of the bottom panel and therefore both seals and additionally underpins the motor mount. It is designed for a 3mm bottom…
This allows you to mount two CSI/DSI to HDMI adapters on your DIN rail, preferably next to your Raspberry Pi. As this is a passive adapter without any electronics involved which just routes the wires onto a HDMI plug, it will work for…
Depending on your print profile you may have to adapt the size of the hole that the tube has a snug fit. Then just sand it down (P240 worked superb for me) and frequently check the length. Don't rely on the sander helper for correct length.
This remix changes the mounting holes to a different pattern that it can be screwed straight to e.g. aluminium extrusions. For more information about the original model please take a look at…
This is a blend of Pinky's Papst EBM backplate (heat insert variant) with the 4028 gaping maw fan duct by Idrake88 ( https://www.thingiverse.com/thing:5330852 ) along with some adaptions. This allows you to use the Papst EBM fan with…
Both molex_electronics_wire_guide_rear is and shelf_right/left_400 are based on RatRigs original models. I'll upload the needed KiCAD/Gerber files and components for the PCB soon.
This is a remix of my older V0.2 lower guard just adapted for the belt and without an endstop because there is none. Includes custom supports, feel free to use them or roll your own. For unknown reasons I can't rotate and save the .3mf…
This allows you to mount your Hamulight L2046 power supply wherever you need it instead of having to rely on 3M tape. It will print fine without supports with “mounting ears” in the air because I used counterbore bridges and suitable…
An meiner Jalusie ist nach knapp 5 Jahren der originale Haken gerissen und daher ging die Jalusie nur noch ganz auf oder ganz zu, ansonsten fällt sie einfach herunter. Daher habe ich diesen Ersatzhaken entworfen, der fast genau dem…
These are all currently available results.
