22 models
This is a box to hold an ESP32 DevKitC board with a grid board to solder on connectors or some electronics. The board itself is meant to rest on pin headers so that it remains removable. There is a hole for an external antenna. To use…
This is the magic wand remixed with a modified bottom. I found the original hard to print (stringing and uneven surface). This remix adds an additional partial cone at the bottom, which provides a larger flat surface and steeper lower…
The plug can be used to close PTFE pneumatic tube fittings when not in use. For example, on a modified RepBox this can be used to avoid humidity entering the box. the plug has an inner cone which will clamp onto filament when inserted.…
This is a remix of the holder for an inductive sensor on a Pipersberg G4 RF1 c . It is used for an 18mm sensor with which I got more stable readings. It also comes with a thicker bolt that fits more tightly in the little cavity. I have…
Many models involving a GoPro mount use a screw embedded into a printed handle and then rely on a nut in the mount to screw in. Frank's Prusa Mk3s camera uses a different method which inspired this model here: embed a nut into the handle,…
This fitting replaces the exit fittings that come with the repbox to add PC4-M10 pneumatic couplings to connect PTFE tubes directly to the repbox. This is a remix that compared to the original: extends the passthrough at the top to fix a…
Water meters frequently come with a half metal wheel that enables to use an inductive sensor as an impulse counter to read water usage data. The Diehl Corona MCI is such a device, it has one rotation per L. The inductive sensor must be…
This is a small case for mounting an ESP8266 D1 Mini Pro on a small Adafruit perma-proto small mint tin size board. The perma-proto is suitable smaller circuits. The external antenna of the D1 Mini Pro is useful if the wifi signal is weak…
The OmniLite Ti stove can be packed to a small package. This set of flex prints gives a little more protection. It helps avoiding piercing sacks into which the stove is packed. It also holds the fuel line for easier packing. The valve cap…
This is a small case for mounting an ESP8266 D1 Mini on a small Adafruit perma-proto small mint tin size board. The perma-proto is suitable smaller circuits. The case is high enough to fit the board with pin headers that typically come…
The DTZ541 is a common meter in Germany that provides an infrared transceiver to read information off the reader, e.g., for integration with Home Assistant. There are several IR heads available that can be bought preassembled, often…
The table soccer we got has one serious problem: every now and then you would hit the goal in an angle that the ball just flies right through the goal box. So I designed a new goal box which has a front plat to catch the ball, and an…
The Lite Plus stove can be packed neatly into the pot. But there are few problematic spots with which this protector set helps. The pot peg protector prevents scratching of the lid. The burner protector prevents the lighter pin to be…
Description This is a remix of G.wrks Spare steel sheet holder wall mount (thanks a lot!). It removes the screw holes for mounting with adhesive strips. It also adds wedges at the back that make the strip ends accessible after mounting. I…
This adds closed walls and base to the original RMU-Mk3 model. This makes it possible to protect the filament a little bit better from humidity changes. Note that the photo shows this mounted using the Dual RMU-Mk3 Connector and Bracket…
This is a case for the OpenDTU breakout board (easy to order from a board manufacturer using, e.g., KiCad). It has clips at the bottom to hold the board (not moving around) and a hole for the external antenna. I have used this with…
The DTZ541 is a common meter in Germany that provides an infrared transceiver to read information off the reader, e.g., for integration with Home Assistant. There are several IR heads available that can be bought preassembled, often…
The RMU-Mk3 is a nicer buffer for the MMU2S. It enables easy switching between five loaded filaments. However, I have two Repboxes, one for PETG and one for PLA. I usually switch to a set of five filaments of the respective material. With…
We like the Tjusig hanger and hat racks. They are simple and functional. But when hanging clothes without a dedicated hanger loop, for example just using a hood, the metal hangers can leave marks in the clothes. This model adds a round…
Simple model to place a Source hydration system (also other brands based on it such as Deuter) on the side of an Ikea shelf. I was using standard hooks before but the bladder or tube fell off regularly. I have placed three of those on the…
This is a remix of Prusa MK3s Anti Vibration Noise Sorbothane Feet to mount two Sorbothane dampeners. I have used it on the back of my printer for better performance on a larger/heavier mode at the back. Print Instructions Printer MK3s+…
We like to go for hikes. Especially in the summer, hidration is important. The parents' backpacks come prepared to hold a hidration system with a tube that enables easy drinking on the go. The child backpack does not come prepared with a…
These are all currently available results.
