Counting matching models…
Not sure if you want to pull the trigger on a mouse because you don't know if you like the shape? Well luckily this would be able to help you determine that! You can also change your infill percentages and get the same weight as the mice…
I remixed Damascus2A's MLOK Handstop V1 to have the Die Free Kung Fu Grip texture. https://odysee.com/@Damascus_2a:6 https://diefree.com/kung-fu-grip/ Below are my recommended print settings: Resolution: 0.1mm Infill: 99% Walls: 10+…
I remixed the Wushu grip from Maverick0197 to have the Die Free Kung Fu Grip texture. https://odysee.com/@Maverick0197:1/WushuGrip:6 https://diefree.com/kung-fu-grip/ Below are my recommended print settings: Resolution: 0.1-0.2mm Infill:…
Inspired from the new Juggernaut Tactical Featureless grip . I used the same grip angle as the JT grip just in case anyone was curious. EDIT: Model V1.1 uploaded, fixes fitment issues with thumb rest and lengthens bolt interface area.…
Summary This is my version of the One Hundred Concept's Light Cap. There are 3 sizes to chose from, so there should be one that works for a plethora of weapon lights. See the attached photo list for what sizes to print for each specific…
Modeled after the Q Sling Devil, you use this in conjunction with some Paracord to attach slings (or other items) to your firearm. Works with airsoft, real firearms, or even… chairs? To tie the open ends, I used 18in of paracord for each,…
EDIT: - Added a template so others can remix other controllers if they have a scan that I haven't done yet! I wasn't too keen on the other designs for the Xbox One Controller Stands for Gridfinity, so I ended up taking a scan of the Xbox…
I was really pissed off one day using the Xbox sticks trying to shoot heads when I got used to my FRSky Taranis RC controller, and ever since I could tell I can be much more precise with the gimbals on the RC Transmitter, so I died in a…
Scout339's 'SmolStop' Hand Stop, inspired from Driven Arms ShortStop. Requires 1x T-Nut for MLOK. For duty-grade strength, I recommend 6 walls and 50% infill. I've tested it with ASA, but PLA+ and PETG should also work. Filled Nylon (and…
Remixed from Sergeevio's Springfield holster claw A holster claw accessory designed to fit any of the right-handed Tulster Glock IWB holsters. This holster claw fits snugly in the corner between the trigger guard and the frame, so that it…
Edit: V1.1 uploaded 2024/04/16 - Addresses issue with joint popping out of place with upward mag ejection. UNFORTUNATELY, not well enough. I will be remaking this file, but for the time being I'm keeping it up as a proof of c;ncept, or…
Based off of the One Hundred Concepts Sling Hook, this is a simple solution to the common problem encountered when rucking with a rifle: The load lifters of the pack do not allow the rifle sling to distribute the weight across the…
Made bottom solid and made lip radius larger for less slipping through the brace. I also corrected te print orientation. Category: 3D Printing
Wanted a lighter, more ergonomic base for the G305. I wish I could transition away from Google Sketchup so I could make the polycount higher and make it more polished, but this model took me about 45 hours of work and it pissed me off…
"A mount to allow an ATX PSU to be used in the NR200P case. This holds the power supply at the front of the case in front of the graphics card with space to allow the front panel IO cables through. It's based on the one you can download…
Update: Uploaded another longer version of the clip for long-waisty bois like myself to give more options! Replacement belt clip for any of the Tier 1 Concealed holsters, other than the holes' distances apart, everything was measured from…
This will allow standoffs and frames that are spaced 30mm to mount micro cameras for FPV drones (20mm). This I specifically made for the Source One V0.2 - V3 frames. V4 and 5 already are thin to accommodate micro cams.
Remix of the [original design](https://www.thingiverse.com/thing:4756605/zip) improving upon the compliance of the clips by removing a slight amount of material where the they bend outwards. This increases longevity of the clips and…
This part is to be used in conjunction with Booligan Shooting Sport's Cheek Clapper kit: https://odysee.com/@BooliganCustomGunworks:f/CP33-Cheek-Clapper-Kit Instead of needing to have a riser to attach to the low pic rail of the original…
Makes it so your controller can accept 18500's (like the 18650 but shorter) so it will fit into an Xbox One controller. Use a little bit of aluminum foil to bridge between the spot where the other battery is supposed to be.
I'm really glad that Pwnage Ultra Custom has fully-modeled, perfectly-scaled models of their mice on their website. Allows me to pull it off the website and convert it to .stl's for people to make replacement parts for them. Some parts…
This is Mechanism's Steam Controller Dock, but I have modded it to accept 50 pennies at the bottom as weights, 4 small holes to use for hot glue feet, and reduced baseplate thickness to accommodate for the extra weight added by the…
My Olight S2R/ Baton light is used outdoors frequently. While camping, having some "lantern-like" light in your tent can be helpful. I Remixed the excellent "Olight S1R Ultralight Diffuser" by @imbrianj to be sized for my light's slightly…
This is my printable Throw Lever for the Gen 1 Strike Eagle (specifically the 1-6x). Slip it onto the scope and use an M3x16 bolt/nut, and tighten until snug!
This is my Minimalist 2026 Steam controllerPuck mount that you press the Puck into. It elevates the puck to meet the controller when it's naturally resting on a flat surface like a desk or table. (Visible in the renders.) It is intended…
I remixed the best option for a phone stand to look a little simpler, that's all.
This was the game logo that I vectorized, then made into a 3d badge that includes/excludes a circle behind it! Included the SVG and also the model without the logo so that others can make remixes of it.
This is a stand / kickstand for the Inmotion V9 Electric Unicycle [EUC]. I took a scan of the original kickstand using photogrammetry, cleaned it up a little, and made some cuts to make it look a little better that are inspired from…
Halo 3 rat? No, we have Halo 3 / Halo Reach Traffic Cone instead. If you choose to print these, you MUST post a make of you leaving one in a random location, as that is the intended purpose of these. Print in any material as long as it's…
Check the original model for more info on Magsafe versions, I just didn't make all the Magsafe variations, only the flatback version.
The item this is based off of should be linked with Printable's remix attribution system somewhere on this page. From the original creator of MOD-GRID TinyToolShop//3DEDC: The MOD GRID is a fully modular system that allows you to…
Updates to both Documentation and files for the case will occur. Some changes that are inbound: - I am working on DXF files for the panels for those that want the panels to be laser cut. - Photos will be updated to show current model…
These are all currently available results.
