Counting matching models…
Simple one piece cherry pitter made for roughly 25mm (1") cherries. If you have some huge ones, scale accordingly. Printing: PETG 0.2 layer height, 4 walls, 5 top and bottom layers, 25+% gyroid infill Use your favorite supports.…
Update 8.10.2024: new slim variant that seats better to the counterpart, still holds and its much nicer to adjust the screws I have bed with cutouts and its 7.5mm thick so every other variants of this part failed. Other problem is that…
Simple box for three BeyBlade X Max diameter 52mm, height 46mm 25.03.26 - added raisers with storage Printing Tested from PETG, 3 walls, 4 top and bottom layers, 10% infill 6+ walls for latches and print them standing on the side Use…
Two base versions for standard or plus edition. You can print two versions of legs, 12cm or 15cm between top and bottom (12cm legs are in photo example). Printing instructions: print base and top wider side facing down print two legs,…
Stable rotating platform if you need one( tugboat from example - 4kg) No soldering required - designed from Bambu parts(motor,board, potenciometr because that was what I had from another project) and 3 or 6 x 608 bearings as wheels for…
Basic set of inserts for 240x205 variant Top and middle inserts are third of the width so you can combine them however you want. Screw inserts are meant to be used together. All inserts have 45° chamfer so you can take them out and for…
Remixed version of ZUCA compact fenders to be made from one piece and mounts. 2 mm thicker for added strength for other fender just mirror in slicer
Stable rotating platform if you need one Designed for 3 x 608 bearings as wheels for better smoothness, but you can use printed ones, they will be fine for this application. 10mm holes in the top plate if you need to print/design any…
I really love this idea, found some designs, but none to my liking so I have made this one. Edit 28.2.2026 - added double sided version Printing 3walls, 4 top and bottom layers, 15% infill, tested with PLA, no supports Colour change after…
I wanted to make some Andy Warhol Campbell soup style hueforges but couldn't find frame so came with this. You can make any grid you want, from single frame to 6x6 frames or more, if your hueforges share some dimension, you can even make…
Designed to be used on ZUCA cart pole, parametric just like original design, STL files are for Nikon Coolshot 20GII
Travel box for OutIn nano standard or plus edition with additional storage. Stand can be used, but whole box needs to be raised a little. Basket or capsule attachment is stored in a cup, extra storage can be used for scales, needle…
print part1 laying down print two pins use pins for alignment and and epoxy glue you will need 2xM5x25mm bolts and t nuts
Dual colors were done on single color extruder with cura filament change post process
Print yourself some unique combinations of colours, glow, reflective, whatever you want. You can print just part A and B and use it as it is, or add inner ring for some colour variation. Do you wanna big plug, print inner core from glow…
Basic care package for TTS55 what do you need: 20x10 openable cable chain for Y axis - you will need 65cm 10x10 for for X, laser cable will fit with connector - you will need 50cm 2x creality ender limit switches with 1m cable !!! i had…
Printable mesh screens with two patterns I printed mine from ASA and then acetone vapor polished them so they look nice and shiny. Antenna Printed standing up from PETG because it can be bended a little. Enable arachne wall generator for…
Tunnel chamber for charging your glow disc, just put the disc in from one side, slowly take it out on the other and its done. You can add movement sensor for better battery efficiency or just turn it on and off manualy. 3 integrated holes…
Just UFO abducting cow dangling in the wind Printing: No supports, you can print UFO with smaller layer height or adaptive for better result. You can do colour change on cow(after 2.5 mm), print second one mirrored and glue them together…
model is set to 9mm to 6mm -org value is original width -new value is width you need you will need 2 x M5 screw with nut and piece of 10mm blade
Scaled for 100% Tested on 200%, just scale accordingly to your dummy. Printing 4 walls, 20% infill, PLA should work, tested with PETG ----------------------- Do you like what we do ? Give us download and like. We burn a lot of plastic in…
Edit 11/2025 : added two smaller sizes Made for Sovol SV08 TOP HAT with BTT 5" Display by Nadir@CN3D Simple cable management clip if you have display in top hat Printing: 4 walls, 4 top and bottom layers, 0.2 layer height, 15 % infill.…
Just back cover with hole for attaching the key or just to hang this awesome counter Printing same as original author suggests. --------------------- Do you like what we do ? Give us download and like. We burn a lot of plastic in…
Remix of popular fidget made for Heat board game Printing: PETG 3 walls, 4 top and bottom layers, 15% infill Be careful with the main part, spring can be damaged if you force it of the plate when it's done For main part, do a colour…
Pocket case for RELX Essential and Infinity with integrated hinges. You can decide what tolerance do you wanna go with with print, i have added 0.5mm and 1mm tolerance files. I have printed mine with 0.15 layer and tolerance 0.5mm, the…
Made for Sovol SV08 TOP HAT Side Exhaust by Nadir@CN3D Better version with smaller footprint that doesn't require any drilling Simple support for PTFE tube so it doesn't dangle around or get into the corner Printing: If you print abs/ASA…
Manual vent to allow some fresh air to go into the enclosure with doors closed. You can use it as front left or back right panel. Compatible with 5" and 7" display variant Shutter is hold on closed by 4pc of 6x3mm magnets. You will need:…
My landlord said Meow! So here is complete set of stair brackets and mounts for making your landlord happy Designed for 40x40mm wooden scuttling with rounded or chamfered corners Stairs are numbered(from bottom to the top) for…
you need around 4l to be fully submerged tested with PETG, 0.2 layer,4 walls, 20% infill ----------------------- Do you like what we do ? Give us download and like. We burn a lot of plastic in prototypes so you don't have too. Thx :)
Because why not, it's satisfying factory. Printing: PETG Supports for the logo so you have cleaner glue surfaces. Print two pins 3 walls, 4 top and bottom layers, 15% infill Make filament change for letters Glue all pieces together,…
I have remixed extruder mount so it sits 3mm closer to the gantry so you can easily access the filament release pull
Made for Sovol SV08 Hinge and door handle by Nadir@CN3D distance between holes is 80mm, you will need to drill the holes by yourself, I have drilled mine 10mm from the edge you will need 4 M3 heat inserts and 4 M3x6-12mm bolts print 2…
Disclaimer This mod requires you to cut the original top cover, it will never seal as good as original (I have my printer in enclosure so I can regulate temperature there) and Elegoo prices this cover for 90 USD so if you decide to do it,…
Disclaimer: these are test files made for me and community, if you wanna make this remix for yourself, write in the comments which hotend are you using so I can remix the front part of hotend holder for pogo pin connector or if you need…
Just a funnel for ponal wood glue bottles Printing PETG 3 walls 4 top and bottom layers, 15% infill, supports on, brim on
Holder for Rapido ace UHF hotend from triangle labs. Great performing hotend IMHO. Printing: ASA/ABS same as Nadir recommends for xenomorph toolhead Infill: 30% gyroid Perimeters: 4 Top Layers: 5 Bottom Layers: 5 Layer Height: 0.2mm…
7mm tall reduction for Nadir's tophat so you can use original mounting hole pattern and add back original top or just to add another single or double layer tophat. BOM 12x M3x5.7mm heat inserts 12x M3x8mm bolts Printing Same as Nadir's…
Print instr. same as nadirs ID 18.5mm ----------------------- Do you like what we do ? Give us download and like. We burn a lot of plastic in prototypes so you don't have too. Thx :)
For base and spike, visit original model from mozWORLD
Coca cola bottle hourglass marble run 500ml Coca cola sells in 200 countries so I hope yours will fit, print the test.stl and see for yourself, if top part protrudes on the top of the bottle, you can still use it, just alight tops and…
Self centering 3 jaw chuck for spin dye discgolf discs. Usable with standard turntable or my manual rotating platform , you can use my motorised one, but I think it's too slow for this BOM: 3x M4x6 or M4x8 heat inserts 6x M3x4 heat…
you will need M5x20mm screw with countersunk head and nut M5 rod 5cm or long screw and you can cut of the head if you need adjustment for imperial size screws, just let me know exact size and i can reupload it for you
Do you want anchor your tripod over the table so you can make a video without it being seen ? Ever wanted to hang your camera over something like railing, doors to make a time lapse? I wanted to make some video of gluing some miniatures…
Smart character organiser Stackable Customisable tokens Portable Colorable multiplier Magnetic HP counters (6x3mm magnets) Big tokens are for inspiration, concentration or conditions. Smaller tokens are for tracking whatever you need, in…
Remix of great wire stripper to be used with 9mm utility blade instead of razor blade. Jaws only, use rest from original author. ---------------------- Do you like what we do ? Give us download and like. We burn a lot of plastic in…
Bigger chamfers around the display for better accessibility of display sides and corners. Printing: Same as Nadir recommends for top hat. ---------------------- Do you like what we do ? Give us download and like. We burn a lot of plastic…
Blind hex grill with single filament hole and holder for SFS2 or stock filament sensor Made for Nadir's top hat for SV08 Two holders for filament sensors, stock or SFS2 Printing same as Nadir's top hat. BOM 2x M3x3 or 4mm heat inserts 2x…
Set of keychains/bag tags with 3D printing thematics Dual sided, 60x60mm You will need 4mm ball, if you are in hurry, you can crack 608 bearing in the vise to get some(7pc), they are brittle and will snap in half. Just have some safety…
This has nothing to do with the performance of stepper motors, it just optimising some values in TMC config for quieter motors that doesn't heat that much. Temp of the motors went down around 10C and I can hold them after 10h print.…
Stepcraft M series table dust guard for additional protection of rails and ball screws against dust Printing: Parts are oriented for print, use brim 6-10mm should be enough Tested with PETG and PLA 3 walls, 4 top and bottom layers, 15 %…
Just a simple geometry rework of the bottom parts for better experience with FDM printers and ASA Polishing stands for acetone vapor smoothening so parts are suspended and not touching the bottom. Print these from PETG…
These are all currently available results.
