Counting matching models…
Are you a skater? You will like it. It's very simple and rad! If you like this model, a coffee helps me stay balanced - both on the board and while modeling ☕ 👉 buymeacoffee.com/nexl Thanks for the support 🙏 Print instructions Material:…
Introducing the redesigned xLCD cover, seamlessly integrating the display flush with the front face for a sleek look. Equipped with a next-gen RGB LED diffuser and compatible with default Prusa xLCD printed supports. Tested on various…
I created this utility primarily for cutting ceiling molding at 45° angle. ⛏ Print instructions ⬢ Material: Prusament PLA Galaxy Silver ⬢ Layer: 0.2 mm ⬢ Infill: 40% Grid - bottom (base), 15% Grid - top
Do you like skateboards? That will come in handy. It's very simple and rad! Print instructions Really simple skateboard deck wall mount - holder. The holder is designed to easy fix to the wall using one screw. Just attach the board with 1…
Tested for Apple Pencil 2nd generation dimensions only. In some cases, it may be better to print a cap by several percent larger to fit it properly. But need just try how much. ⚰️ See my other Apple Pencil cases
Tested for Apple Pencil 2nd generation dimensions only. Click here to see the Apple Pencil 2nd generation MAGNETIC CASE 🧲
Update: Adding a NEW V3 VERSION with a full length that runs along the entire bottom edge of the xLCD cover and guides the light perfectly along its entire length. Adding a NEW V2 VERSION that is shape improved and the diffusion part is…
🏚 Simple and elegant ceiling lines decoration. Or it can be used as a corner cable cover. Print instructions ⬢ Material: Prusament PLA Vanilla White ⬢ Layer: 0.2 mm ⬢ Dimensions (1pcs): 50 mm x 50 mm x 190 mm (1.97" x 1.97" x 7.48") No…
A very useful utility for every maker - Right Angle Ruler! Print instructions ⬢ Material: PLA . ⬢ Infill: 15% honeycomb . Tip: remove the top and bottom layers in your slicing software - you can install **5x5mm magnets** into the…
🟨 Material: Prusament Mango Yellow PETG it looks like a 🐝 DeWALT yellow ⬛️ Layer: 0.3 is enough
This was my first model designed for 3D printing. It is printed several parts glued together with instant glue. It also includes a mechanical part / lever to lift - money - in this case. I plan to redesign the whole model so that it is…
As the name suggests, it is a bowl with 100% fill - but it's not a requirement. It's just for increasing the stability of the object. The bowl is printed from PLA ~ Prusament Galaxy Black and looks really cool ;) ~ with a layer 0.10 mm,…
Printed on Original Prusa XL due to large scale objects . Ramp size: 830 x 330 x 200 mm / 32.6" x 13" x 7.8" Recommended to print with PETG or PLA for indoor use only. There is necessary some fasteners: M3x25 bolts - 8pcs M3x12 bolts - 18…
This is the next iteration of my popular Skateboard Wall Mount Hanger . Now with a refined design and a worm texture for multi-material printing. If you like this model, a coffee helps me stay balanced - both on the board and while…
⬢ Material: PETG or PLA (Galaxy Black looks pretty nice) ⬢ Layer 0.2 mm ⬢ Infill Grid 15% 💡 It's recommended to print the object upside down. With the visible (top) surface on the print surface. You will achieve a smooth/textured visible…
There are two parts of the Sharpie holder, which 20_Sharpie_holder is a base and 20_Sharpie_holder_pad is just a decoration - it is not necessary to print. Hole diameter = 13 mm / 0.51 in No supports No glue 15% Lightning infill is…
For every Social-D fan. Print instructions I like to decorate my garage with plates and I realized that I don't even have a Social Distortion plate and that's wrong! Every punk rock dad must have it. So, before the original SD plate came…
Introducing yet another knob, but this one stands out! It's universally compatible with all Prusa printers and specifically tailored for the NEW LCD cover , fitting models such as the Prusa XL, MK4, MK3.9, and MK3.5. It's designed for…
Smooth and clear design with extra full infill modifiers inside the model. 🧵 Material: PC or ASA materials are recommended . Also PETG (not tested yet), but you can crack the part during the attaching to the handle. 🔩 Fasteners: M3x25…
Printing suggestions: 0.2 mm Layer PETG filament Grid infill with at least 20% density What do you need: M3x8 screw (6x) M3nS nut (6x) TREZOR Model One Assembly: From the inside of the TRbase, insert six M3nS screws into six holes. Place…
mitä siitä vielä kirjoittaa🧐… käytä mustaa⚫ ja valkoista⚪ PLA PEI teräslevyä suositellaan
Hejsan Volvo entusiaster! I created this Swedish flag logo in the Volvo R-Design style for your brick. Print instructions It's recommended to print of the PETG materials for use the flag on your car. 0.2 mm layer looks pretty good on this…
Nödvändig utrustning för alla svenskar, huh? 🇸🇪 Print instructions ⬢ Material: It's up to you... ⬢ Layer: 0.2mm
…and some blah blah blah about the model I did not expect such interest in the previous version of the model . It's just a box. But I appreciate your reviews. I have tried a new improved version based on your feedback. And here it is! Are…
🪴 The base is printed from PLA material and the model must be printed with supports . Prusament Galaxy Black looks great! For better water tightness, the inner part of the flowerpot is an insert made of PETG material with a wall thickness…
Flat xLCD Screen Cover A custom-designed accessory for your Flat xLCD display cover . This cover is specifically engineered to reduce screen brightness in low-light environments, making it ideal for nighttime use or dark rooms where the…
🧢 https://www.facebook.com/softlobkovice/
Don't have a boring railing. Print instructions Column Crown - decoration on the top of the wooden column, for example on a terrace railing. There are two variants: ⬢ square size 80 mm x 80 mm / 3.1" x 3.1" - two screw holes ⬢ square size…
I started it as a gift with photos of my son for my mom. Printed from Woodfill and with a transparent lime green LED holder (one of the variants) - it allows a diffuse backlight under the lamp. Due to the demand and high interest from my…
There are four parts in the 3mf file: 2x curtain holder - print of PC or PETG 2x holder cover - looks good printed of some woodfill or something The curtain holder has a oval screw hole for adjusting its position.
Another punk stuff. For fans of this rad canadian punk rock band and their rly cool album How To Clean Everything.
Prusament Oh My Gold will create an awesome look.
Print instructions Plastic parts: The supporting parts are made of PETG material. They are designed for use on a rods with a diameter of 80 mm. The hooks are also PETG. It's recommended to set more than 2 perimeters for the plastic…
I often carry my aluminum bottle in the side pocket of my backpack where the bottle is exposed to frequent mechanical damage 🏔 . Hopefully, this cover will partially prevent it. Print instructions ⬢ Material: Prusament PETG Carmine Red…
🪴 The base is printed from PLA material. Prusament Galaxy Black looks great! For better water tightness, the inner part of the flowerpot is an insert made of PETG material with a wall thickness of 2 mm. 📦 Models included in CubePot.3mf:…
Material: FILAFLEX 82A - rubber ring and feet Filament FOX ECONOMY PLA WOOD - PLA base The .3mf file already includes a modifier for the gyroid infill in the center part of the base. Everything should fit together perfectly without glue.…
Since bearings contain grease, various types of oils, and are washed in chemical solvents (e.g. acetone), I recommend printing parts from chemical resistant materials. Personally, I used PC (polycarbonate). Use this guide for cleaning…
Printing suggestions: 0.2 mm Layer PETG filament Grid infill with at least 20% density the ATdamper part is better in 99 - 98% scale to fit the assembly better What do you need: M3x8 screw (4x) M3nS nut (4x) key ring (1x) Apple AirTag…
Are you also irritated by the unblinded holes in the assembled IKEA furniture? There is a small solution. Print instructions Plug for holes with a diameter of 15 mm (0.59 "). ⬢ Material: PLA Prusament Signal White 💡 Tip: Use the…
I recommend printing the body from Prusament ASA Natural. You can achieve a great “ceramic” surface by smoothing the model. Article about smoothing can be found here:…
The logo is embossed in different ways, you can create interesting color transitions.
Inner dia. 19 mm (0.75") Tested material - Kimya ABS Carbon Two holes for a zip tie to fix the brake cables. ⚠ Do not tighten the zip tie strongly, the brake cables must move.
A layer height of 0.20 mm works great, and you can scale the model to any size to fit your space 🤙.
Hey there, skaters! 🤙 🛹 Let me take you back to when I was around 12 years old, dreaming big about becoming a professional skateboarder (or just a regular skater… goofy btw). It was during that time that I sketched my very own logo, which…
Made this simple rack because my PS1 games were cluttering up the desk and I wanted them close to the console. It screws into the underside of an IKEA LACK table, so it takes up zero space on top. Quick details: Holds 7 PS1 games…
A simple holder for the original PlayStation controller, designed to easily attach to the edge of an IKEA LACK table. The controller sits securely and naturally in the holder, keeping it within easy reach while keeping the setup clean and…
These are all currently available results.
