Counting matching models…
This handy little piece turns a regular M3 nut into a T-nut that fits into a 2020 / 2040 extrusion ( e.g. Ender 3 frame ) in order to attach anything. Some pictures show an original Ender 3 M4 T-nut for comparison. Prints best with no…
This is my attempt for a universal cable labeling system. The label holder consists of a main part and a snapable cover. Labels can be stuck to the main part's flat surface or inserted into the cover if they are not sticky. Thus, using…
I really appreciate Manzn 's awesome work on the RMU inspired MMU2S Buffer . Unfortunately a clean print of their supplied spool wheels is not possible without using supports, which are tedious to remove and often leave remains…
Another case to turn a DigiSpark Attiny85 into a (fake) USB stick (or just a nice enclosure, that's up to you ;-) ). This one features a consistent hole, which allows attaching it to a key ring or some kind of tie. There are also two 2 mm…
I've designed this spare part to replace the broken brackets of my Ford Fiesta MK7's trunk cover. One of my new brackets consists of two parts which are held together with two M3 x 14 mm screws and nuts. There is no left or right side.…
This (sightly overengineered) design allows you to mount (almost) any common smartphone on a vast variety of monitor frames. I use it primarily in conjunction with the android app Droidcam to use my smartphone as a webcam when I take part…
I wanted to have nice connectors for the extension of my MK3's PSU cables without having to tear down the entire cable harness. Since there were no proper screwing terminal blocks available out there, I did it maker style and designed my…
This is an attachment for the original Prusa Mini spool holder which allows adding a PC4 M10 quick release adapter for a common PTFE tube. Primarily I use this for a reverse bowden setup on my MK3. Printing: any solid filament 0.2mm layer…
My GF designed this adorable little guy for our living room. Feel free to use it for your own.
This simple design collection aims to couple, fix or pass through regular 4mm PTFE tubings in various ways using PC4-M10 pneumatic quick connectors. It can be used to join two separate PTFE tubes together or can serve as pass through for…
I designed this simple hex bases for my colleague's collection of several D20 dices of magic the gathering. They come with different heights which allows positioning them like a stairway. There is also a variant that turns the dice by…
I made yet another 2.5" to 3.5" form factor disk adapter. This one is primarily intended to be placed into 3.5" HDD hot swap bays, which can commonly be found in many server chassis or even midi or big tower configurations. It is designed…
Some spare HDD mounting rails compatible with Q510, Q520, Q910 and Q920 of the Fujitsu ESPRIMO Q-Series which are commonly available here or here . Spare part number: C26361-K1011-C40-*-Y369 Print without support in PETG or ASA at 0.2mm…
This guy lets a regular M4 nut become a wing nut / butterfly nut for various applications. Simply push the metal M4 nut into the side slot. Should fit tightly. Prints with no supports. The output shown in the featured image is at 0.10 mm…
I needed an enclosure for a 55 x 25 x 16mm XL4015 buck converter module which I got from BerryBase . I recommend printing this in PETG since the module may warm up. No supports needed*. Use four M3x25mm screws and regular nuts for…
Made a simple wall mount for tablets, cell phones, flat monitors or any other flat thingy you want to attach to the wall. Devices with 11 to 11.8mm in thinkness work best. Width and height does not matter. Print on the bottom or on the…
A socket, which is compatible with common Mignon AA or Micro AAA batteries. Each contact interface features an input for a banana plug. I primarily connect this piece to a multi meter to gain a simple easy to use battery tester but I'm…
This housing lets you make a triple XT30 connector. I use this one for extending the PSU cables of my MK3. Print …at 0.2mm using a 0.4mm nozzle. Feel free to use any solid filament. Support is not required. Additional parts / equipment…
This is a contribution to the osVAC vacuum cleaner adapter system. It features a regular osVAC F32 female junction on the one end and a round tube with an outer diameter of 29.5 mm on the other end which can be inserted into a vacuum…
I chopped Oostmeije's "2_long_corners_-_T_v10" inset from Thingiverse to fit a regular basic tile.
This clip was designed by the Driving Simulation Laboratory at the Faculty of Computer Science of Schmalkalden University of Applied Sciences for integrating an original Logitech G Driving Force Shifter into a real Opel Corsa B . It is…
People who are bundling lots of cables with this red plastic cable organizer loop on the back of a Lenovo ThinkVision series monitor are aware of the problem that the loop constantly opens up due to the bundle's thickness, especially when…
This is remixed shorter version of https://www.thingiverse.com/thing:3001932 that allowed me a reverse bowden setup when my printer was placed between two lack tables. The original from thingiverse was a few centimeters too large. Prints…
I really like Twarner 's idea of adding a buck converter to the stock PSU cover since there is some wasted unused space in front of it. Unfortunately his/her design lacks of a version featuring a regular Prusa logo. This remix gets rid of…
I remixed Andreas Gohr's “Tiny Raspberry Pi Camera Ribbon Cable Clip” so the 1m ribbon cable of my x-axis mounted pi camera could be attached nicely to the cable of the x-axis stepper for better cable management as shown in the pictures.…
eSun produces some transparent reusable spools which can be separated by removing two bolts. This design makes them compatible to the Masterspool conventions by RichRap . There is a generic version available that meets the original…
I made this attachment for KalleKnall's gorgeus PSU brace out of my recently published terminal block . It allows you to extend the PSU cable of your MK3(s+) by means of a steady screwing terminal with no need to take apart the entire…
For some reason my caliper did not feature a depth gauge so I made an “upgrade” myself. The design replaces the the battery cover and adds a guide for the “rod” the lug. As you can see in the pictures an optional small string can be…
Motivation This is an addon I created primarily for my AOC U27G4R monitors. Having some light behind them feels much more comfortable especially when using the PC at night. I use a BONTEC triple monitor VESA mount and I liked the idea of…
These are all currently available results.
