Counting matching models…
The ESP32-CAM enables you to build a complete webcamera and is available from under five bucks! Here's some great info from someone on youtube https://www.youtube.com/watch?v=MicAM_A0_lU There are a bunch of ESP32-CAM cases available…
Topography and Nürburgring track combined 2021-01-29 - Updated so it's easier to print it standing up on edge without any supports The track in VLN layout with elevations is not my work but I can't find the source anymore. If you know who…
Needed keyrings to differentiate between our two bikes.
Uses four M3 threaded inserts and four M3 screws. I bought an extra oem padded plastic panel and drilled four holes to attach the holder, leaving my original panel intact. The cup holder can be easily removed (so you can slide the seat…
New version Oct 2021 No need to remove the headrest when adding/removing the GoPro mount Push the headrest down with slight force until it locks, this holds the mount securely in place You need to get one regular M5 nut for the Gopro…
The Garmin Catalyst is held by a magnet only. This clip will secure it. Use slightly longer M3 screws to mount it. Category: Automotive
I'm building a few shelves for spool rollers next to my V400 and I'm not using the spool holder on top of the printer. I changed the bowden tube to a longer one for easy insertion of filament (see pics). What I noticed was that even a…
All houses are simple blocks and streets are slightly raised, it's a simplified 3D map of Stockholm. But nevertheless pretty cool :-)
Put padding on top of the sliding armrest and cover with leather or fabric. 2pcs M6 x 40 (max 50) for the hinge 4pcs M4 x 40 for the sliding piece 4pcs 5,3 x 20 washers for the screws holding the sliding piece Outer walls/perimeters: at…
A housing to put the rear view camera on the car roof just behind the sharkfin antenna. Placed here the camera is kept very clean, especially on hatchbacks where the rear of the car gets very dirty very quickly. The full height versions…
My Porsche 996 does not turn the headlights on and off automatically when I start it but thanks to a tip on the Pelicanparts forum by “doctorz1026” about using a rubber gasket under the light switch, I instead made a small 3D printable…
The GR Yaris adjustable steering wheel can brake so only the height position can be adjusted. This is due to a small plastic cylinder braking. This is a temporary fix. Print with 5 outer walls. Category: Automotive
A quick simple desk enclosure for the well known RIDEN RD6006/60xx range of DC-DC power supply control units. This is for when you have a separate AC-DC supply and only want the handy and small RIDEN DC-DC unit on you lab bench taking up…
Two versions: Cup plus a ring to be printed with flex material Cup without a flex part The version with a flex part keeps especially larger bottles and mugs lower down and works way better with large McDonalds cups for example Category:…
Change to a 92mm 24V fan to make the power supply much quieter. With this mod the PSU does NOT fit inside the V400 base, it is placed externally in a safe place. Uses eight M3 thread inserts. NOTE: The V400 can have a different PSU unit…
A very small housing for a Raspberry Pi Zero W and a powerful 2.1 amplifier (~ $37) that drives stereo speakers plus a subwoofer (2x50W plus 100W for sub) I currently run this network music player package on the Rpi: www.moodeaudio.org…
RejsaCAN RejsaCAN is a 3x5 centimeter small ESP32 based board aimed at car use that I put together for my own use in my assorted crazy car projects. The board has an on board CAN interface and can be powered directly from the car (5-15V).…
A simple desk enclosure for the well known RIDEN RD60xx range of DC-DC power supply controllers AND a Meanwell LRS-100 power supply Google the power receptable https://www.google.com/search?q=IEC+320+C14+male+panel+mount Google Riden…
Needed to be able to rotate the webcam and still have a flat level horizontal.
I bought a USB to USB ground isolator that doesn't have a housing. Very handy item at times. Needed a case. https://www.aliexpress.com/af/ADUM3160-isolation.html Category: Computer
Instead of fiddling with connecting the USB type c-connector cable I just place the whole case in this charging stand. Category: Music
With an STM32 "blue pill" board and a few passive components you can build a 200kHz oscilloscope for under $5 in hardware cost. To run it you need an Android software scope called HScope for around $10 (I bought it in Swedish kronor so I…
Convert a panel mount Firewire to USB micro
Print with front of model down towards print plate and with supports from build plate not inside model Category: Mobile Phone
Print with front of model down towards print plate and with supports from build plate not inside model Category: Mobile Phone
If you need to check the precision of your voltmeter or calibrate your oscilloscope this little precision voltage reference is perfect. You find it on Ebay, Amazon , Aliexpress and so on. I had a slight problem buying the battery intended…
Tiny Power Consumption Meter Max: 20V supply 0.1mA resolution Max: 400mA load (1A or 2A also possible with lower resolution) Measure frequency 70Hz Displays: mA and mW average mA and mW since start mAh and mWh since start Load V Measure…
Logo for www.rejsa.nu https://rejsa.nu/forum/viewtopic.php?t=58040 Category: Automotive
Reaching the adjustment setting when the car is on the ground can be tricky and the adjuster can be a bit hard to turn if you reach it with an odd angle with your hand. So I made this larger knob that gives you a bit of leverage. Just…
These are all currently available results.
