Counting matching models…
I wanted to print JonW's very nice four-part drone landing pad with my new MMU2s upgrade. I reworked the original into separate components and then assigned them out in PrusaSilcer. Also used Prusa Silcer to set fill pattern on the base…
As a holiday gift the family is going to Universal Studios, but I needed a token to give them. Hence, this print of the Universal Studios logo. There were a couple up already but none I saw that worked for multicolor. This was made from a…
I liked @Nebbish's DCC-EX case, but it didn't fit my hardware, since I'm using the EX-Motorshield8874, not the Arduino Motorshield. This adjusts the side ports to fit the 8874. I also found the fit of the microcontroller a bit too loose…
This is a modified version of Dr.Print 's Ratcheting Thread Winch . I wanted a version I could mount on the wall, so added wall-mount tabs to the base frame. Also made a simple change to the crank to create a pilot hole to screw in to the…
This puts the pulley at a 45-degree angle from the mounting surface. I had lines coming to the pulley at too obtuse an angle, making them pop out of the groove, so I created this angled pulley to better match the direction of force. Fits…
This caddy is a Derivative of: Remote Caddy by TheScarfNinja https://www.thingiverse.com/thing:3055108 Stephen has made a three-remote version here .
I wanted to wall-mount by dryboxes for storage, so created an adjusted version of the lid to show the sample swatch on the same face as the sensor, which is more visible on the wall. I recommend printing with supports for the corners of…
This is a modified version of Foba's original HD Kadeshi Mothership, available here . The stand mount was removed and the model has been sized up to be in-scale with zacbond's Kushan Mothership . Because of the increased size, the ship…
Modified version of Zacbond 's Bentusi Exchange for large scale printing. I've made two changes here: Resized to be in-scale to the Kushan Mothership. Split into sections for easier printing. Joiners included, everything should…
The motor in my Motorized Light House wore out and I needed to replace it. The WeDo Medium Motor (Lego #45303-1) is retired and any reasonable equivalent was out of stock. So, in the words of my daughter when she was a toddler, “I do it…
Turn tracker for Twilight Imperium 4, remixed with magnets!
As with my Wizarding World modified hexes , these hexes add Dune crests to the hexes appropriate for the Lego Ornithopter set . Includes a Bene Gesserit hex, depending on how you want to count Jessica, and a double-height hex for the…
I've had the Women of NASA kit for a while, and my kids kept finding ways to knock over and break the dioramas. Didn't seem appropriate for these pioneering explorers and scientists! Thus, this mount! It's sized to put the shuttle…
Case for the Potensic A20 drone, controller, batteries and charging cord. Lid is designed to be friction-fit, should stay on pretty solidly.
Aug 31, 2023 Update: Was noted the Strategy Card Box did not have a bottom lip to aid in opening. This is now updated with a 1mm bottom lip like the other boxes. I've printed a lot of extras for Twilight Imperium and wanted a neat place…
Replacement for the battery holder insert in the Powered-Up Battery Box (Lego part 88015). This allows the connection of an AC power adapter. Never worry about running down batteries again! I designed this specifically for the Motorized…
I really like using Vypper's Wormhole Gates in my Twilight Imperium games, but they're problematic for one of my color-blind friends. The different base shapes aren't enough to solve the issue, unfortunately. I've made new bases that fit…
A simple frame designed to fit the WMATA PCB board from Traintrackr . Left side USB access port is sized for the cable provided with the board. May need adjustment for other cables. Due to the size of my printer (PrusaMK3s), the top and…
After getting some of the Lego Hogwarts Banners for the holidays, my daughter (and her mother and I!) wanted a neater way for her to keep her minifigures. Nat_ 's Hexes are a nice way to do that and I decided to zhuzh them up some by…
ESP32 control stack for the Lego Helicarrier. Designed to run my Brickmaster software. Electronic Components Adafruit ESP32 Feather V2 Adafruit Non-Latching Mini Relay FeatherWing eBoot Mini MP1584EN DC-DC Buck Converter You'll also need…
Because my camera didn't rotate and I use a dual-monitor setup with the monitors angled together, my camera was never centered on my face. This monitor clip lets it rotate! The thumb screw screws into the standard mount on the base of the…
Mount for a 16x2 character LCD display, with an attached I2C backpack. Feet act as 1x2 plates, 9 studs apart. Display fits in a frame 9 studs x 3 bricks high, with the display 1 brick + 1 tile above the feet. Picture of a the display…
Have a Support Pickle that needs a home? Print this Support Pickle Support! Takes three 20x5x2 magnets in the back. They should friction-fit but may need a touch of glue. Print upside-down with support for the underside hook.
Simple 4x4 stud plate to hold an Adafruit Stemma 5 Port Hub . Probably slightly better than using mounting tape! The board should slide in to the holders and fit snugly but not take an inordinate amount of force to insert (or remove).
Sidecar extension to the wall mount drybox. I made this as I didn't want to screw into the molding of the windows on either side of my dryboxes. This let me just go over that. Made up of two pieces - the extension plate and the box. The…
The original case for the Brickmaster control system. Brickmaster is a low-voltage switching system that uses MQTT, designed for integration with Home Assistant. Originally designed for controlling legos, hence the name! My default build…
A brace to prevent sagging for Manglerat's UCS-scale Babylon 5 once hung from the ceiling. Despite adding reinforcements to the radiator panels, the lower panels still tended to sag inward. By putting this brace on the forward lower set…
Organizer for Homeworld Fleet Command. Designed for the 'Versus' Grand Admiral pledge, which includes the full expansion as well as the Grey Kushan and Yellow Taiidan expansion fleets. It's intended to pack the primary fleets and all…
Note: 9/30/2026 - After about nine months solidly on the wall, the Bridge broke free of the Lego mount this morning. This will need some redesign work to make it more solid. Or possibly some glue. Use with caution! Wall Mount for the…
I have a Wican Pro to let my home automation system get info from my car (mostly its charge state). Unfortunately on my model when plugged straight into the ODBII port is very easy to hit with the leg. I used a short cable to let me stick…
An MQTT-based, Home Assistant integrated GPIO control system for controlling legos. The Brickmaster RC supports one or two relays for 9v output, good for driving Lego motors or using as a replacement for a battery box. Can be used with my…
When trying to light my Lego Capitol ( 21030 ), I couldn't find a good way to get a light in the Tholos with just Lego. Thus, this little print. This replaces the fluted 2x2 barrel at the top of the dome and holds Bricklink's 1x1 Round…
These are all currently available results.
