Counting matching models…
Hi! Slug trap designs are boring, so I made a fun one! Printed in PETG with 15% infill and 3 perimeters, with 3mm inner and outer brim. Glue or double sided tape the roof to the walls. Dig a hole for a jar, then add some beer and sit this…
Hi! I made this predominantly to preserve balance on my scope, as tape is ugly and I'm lazy. It would I assume also act as a failsafe incase somehow your saddle became loose, although I wouldn't recommend testing it with your sweet scope.…
Hi! I modelled this to allow shaping of the tip of any cue. Printed in PLA at 20% infill & 3 perimeters. Print the shaper and the shim, then add glue to the curve of the shaper, add sandpaper, press into shape with the shim then clamp…
Print in PETG for outdoor resistance. Fits on a wooden kebab skewer.
Hi! I made this to hang Kitchen Roll from an Ikea Lack shelf. Slightly over engineered with the use of bearings, but it works well. Printed in PLA+ with 15% infill. You will also need: 2x M4 Heat inserts 2x M4 Screws 2x 6082S Bearings
Designed to hold a 200mm telescope but could be scaled with modifications to the fixing holes for other sizes. Printed in PLA with 20% infill, which is a little creaky. I'd recommend 40% with 3 layers for a more solid build. I plan to…
Hi Modelled to drain a pool directly to a soakaway via a 65mm rainwater pipe. Currently designed for a hose to be pushed through the spout, I plan to add a Gardena option in the future. Printed in PETG with 100% infill for max structural…
A stand for an 80mm Refractor telescope with 80mm lens (92mm od) Printed in PETG with 4 perimeters and 40% infill. Scalable for different sized scopes, fixing holes included in model.
Hi! I made this to attach to my tripod legs, to stop me kicking them accidentally. Requires 6x M4 threated inserts and 6x M4 countersunk screws. Printed in Copymaster 3D Glow PLA Filament Layer:0.2mm Infill: 20%
Hi! I made this to attach to my tripod legs, to stop me kicking them accidentally. Requires 6x M4 threated inserts and 6x M4 countersunk screws. Printed in Copymaster 3D Glow PLA Filament Layer:0.2mm Infill: 20%
Hi! I made this to mount a PSU to the handle of my EQ6-R, inspired by something I saw on facebook, made for this PSU: https://amzn.eu/d/dVOVotL I used this model for handle geometry: https://www.thingiverse.com/thing:5414767 Printed in…
Hi! I was dissatisfied with the mounting of a Pegasus focuscube to my Altair Astro 200mm F5 scope as due to the curved profile, it was impossible to mount square , so have modelled an adapter to allow fixing of the autofocuser to a flat…
These are all currently available results.
