Counting matching models…
MMU is not required for this version. The crown and anchor are printed separate from the base and then snap into the insets on the base. A little bit of super glue won't hurt, but the pieces fit in pretty snuggly, so it isn't required.
A jibbitz that allows you to show off the greatest beverage ever made on your crocs. Printed with in PLA with a 0.2mm nozzle and 0.05mm layer height. As with most jibbitz I used 6 walls and 100% infill. Grid supports seem to come off the…
An Atlanta Braves jibbitz (croc charm) that doesn't require MMU. My print settings: 0.2mm nozzle, 0.05 layer height, 6 walls, 100% infill, grid supports, PLA, concentric top shell. Color changes at 7.25mm and 7.65mm.
0.2 mm nozzle 0.05 mm layer height 0.15 mm initial layer height 6 walls 100% infill Concentric top surface grid supports Feel free to play with the settings, but the above is what I used and what you see pictured. Filament switches are at…
A jibbitz (croc charm) of the Tardis from Doctor Who My print settings: 0.2mm nozzle 0.05mm layer height 100% infill 6 walls grid supports
A simple holder for the discs made by @Julius_2179462 . The holder can either sit on top of the tower or the tower can be stored on top of the discs. The pole is 100mm, but I can provide one shorter or longer if there is demand.
A jibbitz (croc charm) with the Royal Caribbean logo. My print settings: 0.2mm nozzle 0.05mm layer height 0.15mm initial layer height 1 wall 100% infill Archimedean Chords top surface Filament swap at 7.30mm (layer 170) Grid supports
A little hotdog with mustard jibbitz (croc charm). Only requires 3 filament swaps at 9.35mm, 10.35mm, and 11.15mm. My print settings: 0.2mm nozzle 0.05mm layer height 6 walls 100% infill concentric top layer
The bags that PillPack ships medication in don't work great as dispensers. Occasionally they will send medication in flimsy cardboard dispensers, but they aren't very durable. This is a durable dispenser that uses a piece of filament as a…
This has been used with the Blink Mini 2 but I'm 99% sure it will work with the original Blink Mini.
A jibbitz with the Thundercats logo My print settings: 0.2 mm nozzle 0.15 mm initial layer height 0.05 mm layer height 1 wall Aligned Rectilinear top surface 100% infill Grid supports Filament swaps (height provided in case you change the…
This mounts under the build plate and contains a mount for a GoPro camera. I just have a cheap GoPro knock-off but I don't see why it wouldn't work with a brand name one. If using a heavier camera, it might be a good idea to increase the…
This mounts under the build plate and contains a mount for a Blink Mini camera. You will need to print this in PETG (or stronger) because PLA will begin warping before the plate fully heats up. I found that it was difficult to install if…
When cardboard spools start getting low on filament they can get crushed and deformed when using vacuum bags for storage. This brace is designed to go inside the spool and help it keep its shape. The spool on the left has less than 100g…
This will hold the Nozzle Torque Wrench from Slice Engineering. It comes with a directional snap already built-in.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 142.93x200mm in size Filaments Used: PLA Elegoo Black PLA Elegoo Navy Blue Matte PLA Elegoo Orange PLA Elegoo Yellow PLA Elegoo White This print…
These are all currently available results.
