Counting matching models…
A box to hold a digital caliper. Compatible with Zack Freedman's Gridfinity System: ZackFreedman | 3D model uploads | Thangs Since its a 6x1 module you might have to print it diagonally. No supports needed. Before printing check the…
I wanted to mount my Raspberry Pi Camera close to the bed but not on the gantry beam in the rear. The Camera just fits in this position without being hit by the toolhead (tested with Stealthburner) and without interfering with the front…
A Rugged Box with the matching insert for a Fnirsi HS-02A Soldering Iron and all the included accesories. I had to change the shape of the holder for the power supply from the original Makita insert , as mine was different. So you might…
2 Versions: Version 1: Printed parts: 1x exhaust_filter_housing_sfs2.0.stl. The sensor is only held in place by the PTFE-coupler. I noticed it's stable enough this way. No additional hardware required. Version 2: Printed parts: 1x…
A box to hold pliers and clippers. And once you noticed you clipped something that you shouldn't have clipped: It also holds some superglue. Caution if used in a drawer: Make sure that the superglue has enough clearance above it,…
A box to hold a bowden-tube cutter. Compatible with Zack Freedman's Gridfinity System: ZackFreedman | 3D model uploads | Thangs No supports needed.
Remixed Version of MandicReallys Double RepRack which works with 20mm tubes. Update 17.04.2024: added a smaller version (STLs ending on “smol”; 5mm shorter) to fit Bambulab X1/P1-Series Printers, as requested by @GamingFaxe.
divided it to 8 parts, handle and lids separately. the lids are a little loose, so they might come off too easily. i recommend glueing them on, or making a remix. i might upload a better version of them things to print: 2x Side 2x Side…
The two parts are held together by 8 6x3mm magnets. Supports will be needed for printing. Since the middle sections only have small contact areas to the bed and will tend to warp, i'd recommend using a brim.
A mounting bracket to put a Biqu H2 V2S Lite on a Voron X-Carriage-Frame. Only compatible with the old (CW1) X-Frame, since the screws go in from the rear. The extruder is 2mm offset from the x-carriage, so that it clears the right…
A box to hold a spray bottle. I desigend it to hold my isopropyl alcohol bottle, but it might work with other fluids as well =) Compatible with Zack Freedman's Gridfinity System: ZackFreedman | 3D model uploads | Thangs No supports needed.
the sharp side goes down to 0.2mm, but i printed with a 0.4mm nozzle, and it works well. the areas below 0.4mm were just ignored in the slicer. a brim was not required, but if you have warping issues, i'd reccomend one
I liked the design of the original case, and it fits well, but the lip of the bottom part comes off after disassembling once or twice. So i remixed the case, so that the lid can be screwed in place. In this version you can also mount a…
The Original TurtleNeck does not have to be modified. The 4 M3x8 SHCS used for the TurtleNeck have to be ferromagnetic. The .step files with “jst” in the name are for the mod with the jst-connector. Required Hardware: 4x 6x3mm Magnets 1x…
A box to hold nozzles and the tools required for nozzle changing. Compatible with Zack Freedman's Gridfinity System : this 4x2 module holds: - up to 10 nozzles (or the insert for unused slots) - container for nozzle cleaner needles - 6mm…
A model of a chainsaw used as a piggy-Bank. All parts are held in place with 28 magnets (6x3mm). The blade is a bit heavy so i had to additionaly glue it to the main body. Glueing might not be necessary with stronger magnets. Supports are…
These are all currently available results.
