Counting matching models…
These are motorcycle mirror extensions with presets to extend mirrors outwards by 1-5/8" and upwards (raised) by 1-3/8". There are two presets: one for use with M10 threaded inserts and the other for direct use with M10 bolts. The model…
These are scalable/parametric, hardware-compatible risers for Bora Centipede work stands. Bora sells 6" high risers, making the stands 36" high. However, if you use a sheet of plywood or a table top for the work stands, the working height…
These are bar ends for Honda motorcycles. I created them after having my CB300R grips replaced with Koso Apollo heated grips. The Koso grips are 8mm longer than the stock grips, causing my bar end weights to no longer fit. Bar ends should…
This is a parametric/customizable stop block for t-track fences. The presets are for Kreg Trak, which accepts ¼" bolts and is 2-5/8" (66mm) tall and 1-3/8" (35mm) wide. The knobs are sized with very tight tolerances so that the nuts can…
This is a remix of the Adafruit Heat Set Insert Press. The original model is designed to hold a Best 102C soldering iron. This clamp allows a Pinecil to be used with the press. The model is parametric and can be customized for a different…
These are parametric plugs for motorcycle frames. I've included presets for the Honda CB300R chassis and pillion holders. The frame plugs require a 20mm stem, but the left and right pillion holders are asymmetric: the left plug requires a…
This is a set of popsicle stick joints for 30, 45, 60, 90, 120, and 180 degree connections. Included is also a parametric model that can be used to create joints with any number of connections at arbitrary angles. An open-top model is…
These are spacers for Honda motorcycle bar end weights. I created them after having my CB300R grips replaced with Koso Apollo heated grips. The Koso grips are 8mm longer than the stock grips, causing my bar end weights to no longer fit. I…
This is a clone of the MOLLE adapter for the SW-Motech T-Lock holder ( https://sw-motech.us/products/luggage/tank+bags/accessories/4052572185681.htm ). It will allow you to attach any MOLLE bag to the holder.
This router template may be used to create short and long keyhole slots for picture frames. It is meant to be used with a 3/8" keyhole router bit (such as the Freud 70-104 or Rockler 92024) and a 5/8" short shank template guide bushing.…
This mount enables the Amcrest ASH21-B and ASH21-W cameras to be mounted to a support with a zip tie. The model is parametric and can be customized for use with different-sized zip ties or other items, such as straps, string, etc.
This is a model based on the vintage Japanese Cat Eye RR-250-WU wheel reflectors. They aren't easy to find anymore, so I decided to make my own. The model is fully parametric, so you should be able to scale it to your desired dimensions.…
This is a parametric spacer for the Katz-Moses stop block. My track (Kreg Heavy Duty Trak) is 2.675" tall, leaving a gap slightly under ½" between the bottom edge of the stop block and my table. Pieces around ½" or slimmer don't have a…
I wanted an inexpensive optic for my Nerf Rival Kronos. The Daisy Electronic Red Dot Point Sight (https://www.amazon.com/gp/product/B000N8KHQG/) fits the bill, but the bracket doesn't fit on the Nerf Rival Kronos' rail. The model is…
I lost an end cap for my Koso Apollo heated grips, so I modeled a set as a replacement. The caps that come with the grips are very thin and light, so these do not need to be printed strong if you use the stock configuration. The model can…
A simple hook and latch drawer lock to prevent prying toddler hands from opening drawers and accessing their contents. Few other drawer locks work for my drawers, which are mounted into a face frame and have drawer fronts with narrow…
The stock fan for the Revo Micro is a 20mm 5V fan that comes with a buck converter. However, the converter adds bulk to the hotend on my delta printer. I'd prefer to use a 24V fan, but the smallest ones I can find are 25mm. The model will…
I use the Freeman KEYQC3 Pull Apart Coupler Keychain ( https://www.amazon.com/gp/product/B077CSHG3N/ ) for many of my keys. I typically attach the female end to my house keys and use the male ends for my car, motorcycle, and bicycle keys.…
The other two eSun Repwinder spacers I found on Printables did not fit my eSun Masterspool, so I created my own. The eSun Masterspool requires a 6mm spacer, while normal eSun spools require a 16mm spacer. This model is parametric, so it…
This is a storage case for the Radian Compressor Quick Tune Guide Rod. The case has room for the guide rod, springs, and washer. The model is parametric in case you'd like to try using it for another guide rod with different dimensions or…
This is a replacement handle for the Joyce Chen flat-bottom wok ( https://www.amazon.com/gp/product/B0001VQIP4/ ). The wok comes with resin handles, but many owners have experienced failures in these handles, and replacement handles are…
These are all currently available results.
