Counting matching models…
I wanted to use the original model , by herbert , on my electronics bench, but it does not have a pegboard, so I remixed it to mount with screws or double-sided tape. This model matches the Pegboard Screwdriver Holder (7mm honeycomb and…
One of my hobbies is woodturning, and one tool that every woodturner needs is a good center finder. The Center Finder (Square/Round) by my fellow YouTube Maker, Marius Hornberger , is one of the best I have ever used. Unfortunately, the…
***Updated 11-7-2022 | Now Compatible With 15mm & 22mm Tent Poles | *** Added 22mm ID versions of all clamps to add compatibility with grow tents that utilize 22mm OD support poles. If you need a version of these clamps with a different…
This is a remix of the Rust Furnace from https://www.thingiverse.com/thing:2951215. I modified the bottom hole to be 1mm larger to accommodate most LED Tealight Candles. Some Tealights from Amazon and Hobby Lobby did not fit the original…
This is a 5.5-inch diameter irrigation ring designed to be used with 0.25-inch ID Tubing. Use a small ball valve to adjust the flow rate of the water through the ring. This works perfectly with my 2-Liter Soda Bottle To 0.25-Inch ID Tube…
Holds 4 rechargeable AA Batteries. Place batteries nub up for the “Charged” indication and nub down for the “Depleted” indication. I have tested it with the following rechargeable AAA battery brands: Amazon Basics AA High-Capacity -…
This cap is designed to allow you to fill a 2-liter bottle with water, and then attach a hose that will slowly drip the water into a plant container over a period of time. IMPORTANT: Cut a small washer out of craft foam to help seal the…
Introducing the 3.5-inch Swimmin' Frog Open Pour Bait Mold! Designed with meticulous attention to detail, this mold from TheMakersWorkbench and Making Baits is a must-have for anglers and DIY bait-making enthusiasts aiming to create…
This is a resin vat drain stand for the Creality Halot One. It features a height-adjustable funnel holder, and the vat holder is height-adjustable as well. The locking knob holes are designed for heat-set threaded inserts, and the knobs…
Similar to my TweakTown 24x Thumb Drive Organizer found here, this Flash Drive Organizer Holds 24 Standard USB Flash Drives but does not feature a logo. I have tested this model with the following thumb drives, but it will work with any…
This is a simple electrical engineering schematic symbol drawing template. I've included both the .STL & DXF for 3D Printing or Laser Cutting. Print with 2-3 shells maximum. Remix Culture Approved! - To aid in remixes from the community I…
I grow tomato plants indoors during the winter, and use these adapters to help water the plants slowly via a 2-liter soda bottle filled with water. This set includes single, double, triple, quad, and six-outlet versions. Works best with…
Behold the Holy Mushroom! This is the result of being stuck in a 3-hour webinar on a topic that has nothing to do with my job. I was feeling creative, and a bit artsy, so I started playing around with the form tool in Fusion 360. The…
This is a simple Arduino Uno R3 schematic symbol drawing template. I've included both the .STL & DXF for 3D Printing or Laser Cutting. Print with 2-3 shells maximum. Remix Culture Approved! - To aid in remixes from the community I have…
This is a 7-inch diameter irrigation ring designed to be used with 0.375-inch ID Tubing. Use a small ball valve to adjust the flow rate of the water through the ring. This works perfectly with my 2-Liter Soda Bottle To 0.25-Inch ID Tube…
This panel-mount bezel is designed to fit any standard 16x2 serial or parallel LCD. Designed and used in a custom PC project I built. .Skp file is include for easy modification! Instructions Print in PLA or ABS with a layer height of 0.25…
I designed this simple coaster as an example of how I make honeycomb patterns in Fusion 360 for a YouTube video which you can view below. This coaster is 5-inches in diameter with a 0.25-inch solid border and is 0.25-inches thick. It…
This is a 20mm-150mm circle drawing template. It utilizes a standard 608-sized skate bearing. I've included both the .STL & DXF for 3D Printing or Laser Cutting. Print with 3-5 shells maximum. Recommended Skate Bearings: Black And Red…
This is a simple Arduino MEGA schematic symbol drawing template. I've included both the .STL & DXF for 3D Printing or Laser Cutting. Print with 2-3 shells maximum. Remix Culture Approved! - To aid in remixes from the community I have…
Holds 6 rechargeable AAA Batteries. Place batteries nub up for “Charged” indication, and nub down for “Depleted” indication. I have tested it with the following AAA Battery Brands: Amazon Basics AAA High-Capacity - https://amzn.to/3NCBMJf…
I turn a lot of pens and use Micro-Mesh sanding pads to polish them when finished. I wanted a nice rack to hold the pads, and I think I went a little overboard with my design. This rack is fully skeletonized with a honeycomb pattern to…
Just a quick and dirty tape holder. This features a 2.25-inches long shelf to hold even large tape rolls. The body is 0.25-inches thick for added stability and features a gusset on the bottom for even more rigidity. It also features two…
I originally designed this media storage organizer to be made on my X-Carve CNC Router, but had a few people ask me for the .stl file, so here it is! This media storage organizer is designed to hold 35 SD Cards, 15 microSD Cards, and 18…
Customized version of http://www.thingiverse.com/thing:343343 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=343343 Instructions Using the following options: motor_shaft_diameter = 6 screws_disposition =…
A simple 1 7/8" Vacuum Attachment. Print with the angled top down for best results and less supports. Works with most 5-10hp Shop Vacuums such as Heart, Dewalt, Shopvac, Rigid, Kobalt, and Craftsman. If you would like this file with a…
This is a seed starting soil pot maker that utilizes old newspaper, or any NON GLOSSY paper to make small pots to start seeds in. Use a 3.5" x 11" piece of paper for best results. I printed this using Polymaker's Polyterra Eco-Friendly…
Just a simple bracket that allows you to mount a 240mm PC radiator to your case using just the 2 middle fan mounting holes on each side. Instructions Print at .25 layer height with PLA. Mount to Radiator and case using M3 machine screws.…
These clamps are designed to fit a carbon filter with an outer diameter of 7.8". These types of filters usually feature a 4" intake/outlet flange, and are often used in indoor gardens, and airbrushing fume hoods. They feature a small flat…
These disk inserts are designed for Craftsman and Rigid table saws that have the factory cast iron router table wing installed. The outer diameter of the disk is 2.5-inches, with the inner ring lip measuring an outer diameter of 2-inches.…
This is one of my most popular designs and was originally printed in 2011 on my McWire RepStrap. It has since been downloaded from various .stl repositories over 100,000 times. If you print this model, please share your make, and leave a…
This case will fit six 12V size 23A batteries. 23A is interchangeable with the following batteries and should fit fine: MN21 / MS21 / V23GA / L1028 I have tested this case with the following brands of 23A batteries: Amazon Basics 23A…
I curated this suite back in 2012 as a method to test print quality on several different Mendel Max printers that were new to the 3D Printing world, but since then printers have evolved (when I uploaded this, it was normal to print at .3…
This is a riser for an 8-inch flower pot, grow bag, or anything 8-inches in diameter that needs to be raised off the floor. It features drainage holes on the bottom. Fits this type of flower pot: 2 Gallon Plastic Garden Flower Pots with…
Customized version of http://www.thingiverse.com/thing:343343 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=343343 Instructions Using the following options: profile = 3 screws_disposition = 0 nut_shape =…
I worked for TweakTown.com previously and was requested to design a 24x Thumb drive organizer for one of the reviewers. Here it is! I have a second version of this holder that has been updated and does not include the logo. You can find…
This is a knob that accepts a 1/4"-20 nut or bolt. I downloaded this from Thingiverse years ago, and wanted to share it with a friend, but could no longer find it here. I am not sure if it was deleted, or if it's just lost to the rather…
I make several different styles of desk organizers and valets on my CNC router to sell at craft shows and on Etsy, and thought I would share one of them here for everyone to 3D print. This small desk valet will hold the largest mobile…
This model converts a cheap microphone boom arm into a positionable GoPro camera mount. Utilizes stock GoPro mounting hardware, and fits all standard GoPro mounts. V1 Pictured. V2 includes improvements to design to reduce filament usage…
This mount is designed to fit the Ultra Sonic Distance Sensor sold by Sainsmart which can be found here (…
This page description is a work in progress. Use this clamp in conjunction with my 2-Liter Soda Bottle To 0.25-Inch ID Tube Adapters found here. *Note: This post contains Amazon Affiliate links that support The Makers Workbench via a…
Just put both halves onto a single plate for ease of printing on printers with a build surface of 7'" x 7" x 3" or larger. Category: Electronics
This is simple sand spike with a GoPro mount on top. Great for low-angle beach videos. Print with logo side down and with 6-10 shells with 25% Gyroid infill for stronger, more sturdy body that can withstand stabbing into wet or dry sand.…
I needed a Wemos D1 Mini case that had room for some passive electrionics and an extended power harness for WS2812B LED Strips. Loaded the original Fusion 360 design file by Surrbradl08, modified the sketch to extend the length of the…
I remixed this to include an extension arm that allows the sensor housing to mounted on a horizontal surface such as a shelf and still be able to look down into the room. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No…
I modified this popular design in 2012 for a friend who wanted this owl-shaped headphone wrapper but did not want a large rectangular hole in the middle like the original had. The original file has since disappeared from Thingiverse, and…
Lulzbot ships a handy and quite complete tool kit with their printers. Unfortunately they come stored in a zippered pouch that makes finding tools a bit of a hassle. I designed this desktop tool holder with specific slots for each of the…
Needed a blue microphone flag for an upcoming conference, so I designed one. It features 5 sides which are 50mm square each, and a 36mm hole for the mic to fit through. Just add some foam, and logo stickers and call it done! Designed to…
This is simple 1/4-20 camera mount designed to fit inside most PVC sand spikes with an inner-diameter of 1.5-inches or 2-inches. This works great with a GoPro mounts, Ball Heads, and standard built-in camera mounts. Great for medium to…
Customized version of http://www.thingiverse.com/thing:41274 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=41274 Instructions Using the following options: 39_diameter_of_top_of_the_cylinder = 5…
Alligator Clip Leads are something I use quite often to jump wires and components from one prototyping project to the next, and they are a pain in the ass to organize. For a few weeks now I have been using a piece of 1/16" craft foam…
Customized version of http://www.thingiverse.com/thing:46335 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=46335 Instructions Using the following options: SD_cards = 10 Device_Type = 3…
Customized version of http://www.thingiverse.com/thing:46335 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=46335 Instructions Using the following options: Pencil_gap = 3 Sign_HEIGHT = 6 Sign_TYPE = 1…
This is a holder clip for Edsyn's Soldapullt Deluxe DS017 Desoldering Pump. This holder clip features two 3mm screw holes with 8mm countersinks. This will fit Soldapullt's that is 26mm in diameter. Fits the Edsyn Soldapullt Deluxe DS017:…
Custom Dowl Taper Finish-Sanding Jig for A Friend. Category: Tools
When Microsoft announced that Windows 10 would be arriving on the Raspberry Pi 2 in 2015 I became extremely excited at the possibilities that this would bring the maker community. To celebrate I wanted to design a case for the Pi 2 that…
I designed this Electronic Cigarette holder for a friend who needed an easy way to store his E-Cig stuff on his desk. It holds: 1x Tesla or other similar sized e-cig Mods 2x eGo batteries 5x Vivi Nova 3.5mm Tanks 5X eGo clearomizer's…
This is the mechanical assembly for the Trick or Trivia Halloween Trivia-based Candy Dispenser project I built for my Halloween 2015 Raspberry Pi Projects at Element14.com. You can find the full project at this link.…
I designed this case to hold a GPS Data Logger I built using the TinyCircuits TinyDuino, TinyShield USB & ICP Stack, TinyShield microSD, and TinyShield GPS modules. The case is designed to be mounted to a quad-copter via cheap Velcro…
Modeled this fan mount for a tutorial I wrote. The mount is designed to perfectly fit a Suscool 81 80MM PC Fan from Silverstone Technology. This mount utilizes the existing mounting screws for the wire hold downs on the AO-100.…
Customized version of http://www.thingiverse.com/thing:52734 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=52734 Instructions Using the following options: message = TweakTown font_thickness = 5…
Housing for the Switch-Vandal Resistant Illuminated Momentary "Lamptron" Style Switch. This is designed with a tab to allow mounting to standard 20mm extrusion using an M5 Screw. Link to Switch: http://amzn.to/2mucTnl I have included the…
I had issues with my mini tripod and LifeCam Studio when recording or streaming prints. So I designed a mount that held the camera at the popper height, and synced the printer's vibrations with the camera. The result was a much more…
Introducing the 5.5-inch Thicc Stixx 3D Printable Injection Mold! Crafted with precision and innovation, this mold from Making Baits is an essential tool for anglers and DIY bait-making enthusiasts looking to produce thick-bodied soft…
These are all currently available results.
