Counting matching models…
Print on the flat side. If you use the modifier you can print the part with 1 perimeter and very little infill. Printed mine in CF PETG but anything will work. To fix the mount screw a M3x20 (DIN 912) hand tight into the mount. Check if…
Its a big box of desiccant that fits into the Sunlu S4 filament dryer. Fits about 500g of desiccant. printed the small in PC CF and the big in PETG CF.
Rack for the dumbbell set from decathlon. The model has two parts. the lower part is 1.5mm thick and can be printed in TPU with a simple filament change. Only works with filaments that sick to each other. PLA und TPU should be fine. You…
Mount for 4 sunglasses. With build in support. Fusion file is there too if you need more or less glasses Just glue it to the wall with 2 powerstrips.
Clips onto the shelf and stays snug. Strong enough to hang a backpack.
use a M4 screw to attach direkt to the self. Since in my shelf not all holes are strait i have a left and a right version that is a bit tilted.
Frame for instax square and mini pictures. Plus a back for wall mount and a stand.
Needs M3 screws to fix the rubber parts to the main body. Printed the main body from PLA and the rubber parts from TPU.
I printed it with PC carbon but everything will work.
Never lose your spray bottle of IPA again. Fits right in the fron of the XL. Alternatively it fits on the side of the XL. The hanger just clips into the extrusion. Printed from PC to minimize deformation due to heat or creep.
the settings in the slicer project are the ones in the picture. if you want to configure it your self: - print the inside with no top and bottom layers and low infill. - the linewidth of the inner infill should be increased to about…
These are all currently available results.
