Counting matching models…
It is made for small pill so you can easily carry your medication privatly in this incognito case. You can scale it up if you need more space but the magnets needs to be bigger. Feel free to review it and I might make a bigger case if…
Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 2 (or more) Infill ...................................... 15% (or more) Supports .............................…
Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 2 Infill ...................................... 15% Supports ............................. enforcers only Bed…
This project started as a light diffuser for my phone and became a simple snowball shape light diffuser for winter time. Its easy to fit one LED candle inside it. Print a couple and you have soft lighting around the table or else where at…
Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 2 Infill ...................................... 25% /100% Supports ............................. enforcers only…
*WIP* working prototype Its working well but I want to polish it more. Suggestions welcome I wanted to get a Strainwave mount to use my C8 and replace the AzGti that was overloaded. After finding the Astrophilo project I decided to build…
This adapter make it easy to swap the TC or the other filter adapter I made. Know that there is a big vignetting on the first 2 steps of the digital in camera TC. So this gives us 75mm equip @ 33mp and 95mm @ 20mp. You can also manually…
I hadded a before and after set of 2 images to show how much space can be saved. *edit : I modified the width of the box to removed the gap if you put 2 or more side by side. I will leave the older model available too. Print settings…
update: after extensive use one bearing pin broke. I suggest to print it 4-5 perim with 30% + infill Ideally this is printed in Petg (Pla should work but untested) with 2 perimeters or more without supports. It barely fits my prusa mk3…
An adapter to put protective (or other) filter on GXR S10 and P10 lenses. It accpet 52mm filters when pressfit in reverse (front of the filter is pushed on the adapter barrel, see image) Print settings Nozzle size…
I made this to diffuse the light from my flip5. Its great as a very soft night light. Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 3 Infill…
Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.1 Number of perimeters ... 2 Infill ...................................... 15% Supports ............................. yes, the inner…
I made it from PLA but PETG should give more flex.
Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 2 (or more) Infill ...................................... 15% (or more) Supports .............................…
This is a simple mask for SCT collimation. It can be printed in different materials of your liking (gluestic recommanded for PLA). Pictured is PETG leftover filaments used but I suggest you print it black of use anti-relfection material…
I made this for camping so I can easily hag it from a hook on my tent ceiling. It turns out its usefull in many situations when the flip is folded. Print settings Nozzle size ......................... 0.4 mm Layer height…
It works with LED stipes of 8mm width by 70mm long and up. Thickness can be from 1mm to 4-5mm. The ring in 3 parts snaps in place (you can glue it with contact (ca) glue). Also the optionnal clips allows to secure the usb cable and extra…
Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 2 Infill ...................................... 15% Supports ............................. yes Bed surface…
Print settings *Use filament that has a strong glow for best results Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 2 Infill ...................................... 0% (only…
Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 2 (or more) Infill ...................................... 15% (or more) Supports .............................…
These are all currently available results.
