Counting matching models…
Just a quick holder for the wonderful HSW Removal Tool this is remixed from. You can print it right side up or upside down as you prefer. If printing right side up, you will need at least a brim most likely to keep it from falling over. I…
Honeycomb Storage Wall Plier holder remix. Remix is just chopping off the top of the model and re-adding the chamfers to make it smaller and still work just as well. No other changes, just wanted to be more efficient with filament and…
This is designed for Q-tips but could dispense other roughly cylindrical things of similar size. This is a hex peg attachment to the wall, that goes into an empty socket. The larger hex on the back is a spacer to allow room for the lid to…
Cheese replacement piece for Mice and Mystics boardgame. Gives a nice 3d feel to the cheese, and I don't like cardboard chits that much. This is a wax covered cheese wheel style, like some swiss or a gouda / edam We are going to paint…
Silverware holder for dish drying rack. Air holes made square to avoid overhangs and bridging. The ‘hook’ on the back needs support. The support is included in the gcode if your printer is similar enough to a Prusa MK3. Made it so that I…
This is designed for the cages we have, but it may fit your cage as well! The cup part goes inside the cage and the hopper goes outside for easy feeding without having to open the cage. The cup is a little bit taller than the gaps in the…
Had some issues with the handles slipping out and not releasing the compliant mechanism. Added a lip to the flex part.
Three bits I use for a few games, originally made for Champions of Midgard). Ham / Food Glory / Horn - this model includes a disc that I use to raise it off the print bed for supports. Wood - has a cutoff branch so it does not roll off a…
Found some other models, but they had frills I didn't like or didn't have proper relief for the cable that exits out the back of the streamdeck forcing an ill fit or a kinked cable that could damage the streamdeck over time. Just a flat…
Boxes to keep the dice and tokens together for Champions of Midgard. Boxes made for both expansions.
Some dwarf themed coins I made for games like Caverna. The stl files are all single faced, coins typically don't print well at all on the face down side, and the flat sides glue together super easily, I can't even see the seams on most…
Made for honeycomb storage wall. This design is 1 wide and 2 units tall. It tiles nicely in both directions and is designed as a small bit holding solution. The shelves/boxes fit into the outer box at a 5 degree angle so they won't…
Simple extruder visualizer. The arrow is fully supported in shown orientation. I put a touch of support on the underside where the magnet indent is, but that bridge should be okay without supports. It is just there to help center the…
Miniature pieces designed for the game Black Fleet, and made to fit in the ships provided in that game. Great for other games that use cubes for something that could be represented by a barrel, crate, corn, tobacco, or sugar. Instructions…
Made a three part cherry bit so I could make the stem a different color and make the berries round without having to mess with supports. The berry parts should be printed with fine layer lines near the top so the stair stepping is…
I just needed a simple place to put a few spools of thread and some needles. This is all for practical stuff, I don't care if the thread color matches so I don't need a bunch of different colors and I want to be able to store a few…
All pieces are 20cm x 20cm base. This started as me just taking pgu5787's design and breaking it up so I could print the parts separately. What ended up happening was: Kept Tower as is (then made my own, see point 11) Kept Wall as is…
Made these for Clank! In! Space boardgame, but I will probably print more and use them for netrunner as well. Print in two parts and glue them together. I use ABS and then solvent weld them together with acetone slurry so it becomes one…
This is a slanted deckbox I made for the cards in the boardgame Clank! and the Sunken treasures expansion. It fits all the adventure cards and the market cards. I keep the 4 starter decks in separate baggies so they are not made to fit in…
The image is from the 8mm x 2mm magnet version. I printed test fit parts to confirm that the tolerances for the no magnet version worked good, but didn't print a full set of them since I wanted to use the magnet version.
Edge of Darkness holder for the ability cards in Edge of Darkness and all three expansions. Designed to hold all ability cards sleeved (one sleeve per location) and sideways. This orientation is designed to go below the guild boxes that I…
Tracking movement and advantage can be a bit annoying in Return to Dark Tower. I also find sometimes player turn can be forgotten with all the things the tower does at times. I made this to pass around to track the current player as well…
Great model from the original designer, I just modified the text so there were not little 'islands' on the first layer.
Finally got around to making a box for my Millennium Falcon model for X-Wing miniatures game. The box keeps it safe and takes up a little less space than the nice clear plastic it came in. Because it is a big part and because the lid…
This is a player screen I made for the Medina game pieces at: http://www.thingiverse.com/thing:943076 The roof and walls use 3 magnets each (0.8mm diameter, 1mm thick) to attach right now. I really like the magnetic attachment, but feel…
These are 3d printed keys for the boardgame "Abyss". Really fun game with awesome components so I thought I would upgrade the keys from the cardboard chits to 3d objects. My wife drew the 3 level STL this came from and then I made the 3d…
Card holder for Edge of Darkness. Attaches to original monster tower. The slots in the bottom are ALMOST enough to hold this in place with no adhesive, but I made it with the intent of gluing it permanently to the tower. The slots are…
"Kohaku one piece" file is for those with a big enough print bed to print the model all in one piece. The original box interior is about 10 inches x 10 inches, the insert is a bit undersized. If your printer is not big enough, you can…
Coin holder for the game Scythe. This is sized for the chitboard coins that come with the game, not the metal coins that are in the kickstarter or will soon (maybe already) be sold separately. These MAY work for the metal coins if they…
Box for the new T-70 Xwing that comes with the force awakens core set. This is a different model than the original xwing. Different engine placement, modifications to wings, etc.... Post-Printing On the lid you can see two chamfers to…
I got an early print run of Alchemists, and the tokens are a little oversized and were hard to put in and take out of the deduction grids. These are what I used to make more. You can get the token tray in the the images here . All of the…
Pretty straightforward, cups and lids sized for the Yamatai boats to keep them organized and easily use in play. Category: Games
Token Tray for the tokens in the game Alchemists. Fits about 19 in the 4 long channels and 9 in the 4 smaller channels in the back. It is made to close with magnets, I used 8mm diameter x 0.8 mm thickness, but the magnet spots are…
Designed this as part of an iphone holder. This version does not require any bearings. It is probably not as smooth as using bearings, but it works very well for me. The magnets this is sized for are 8mm diameter. A dab of glue should…
These are all currently available results.
