Counting matching models…
This is a variation of the Infinity Cube. No assembly required. To be printed with 0.2mm layer height and 20% infill. If the model appear to be too restrained in the joints after printing, and using it does not fixing this, heat your bed…
Inner Door Handle Frame V3 for all BMW E36 models. THIS IS THE LIMITED DEMO VERSION . The full version is available here https://www.printables.com/model/843574-bmw-e36-inner-front-door-handle-frame-v3 The models shown here are not…
>>>>>>>>>>>> NEW Version 2.0 is available here. <<<<<<<<<<<< ------- This is the older version 1.x. Click here to get new model. This hardcase lets you scale it to suit you needs. Model is free. Please consider uploading a photo of a make…
Parts for connecting 100m ventilation tubes. 90 and 135 degree bend adn 1 to 2 and 1 to 3 links. Orientation for print will depend on printer and you may have to experiment with support. These can be hard to print without support. See…
Hardcase to scale to fit the size of your need. This new version 2.1 of the hardcase has a list of minor changes as well as functional improvements and design was slightly changed to be easier to print all compared to the old version 1.0…
NEW Version. Cosmetic cleanup and slightly better modelled. Conic fit for Ø 100mm duct. This is parts for ventilation fitting 110x55mm rectangle ventilation duct to 100mm Ø duct. Orientation for print will depend on printer and you may…
This is an enforced version of the Voron Stealthburner latch that for the ECAS version has a very thin part that easily breaks. On the the picture, is the original latch thinned to make space for the ECAS shown broken. To prevent…
Parts for connecting 100m ventilation tubes. One to one, one to two, one to tree and the third tube part you can glue to a one to two part if bought commercially. Most parts in this collection should be printed standing. The overhangs may…
This is parts for 110x55mm rectangle ventilation tubes. Orientation for print will depend on printer and you may have to experiment with support. Here is an example of a duct angled 45 degrees for better print result for overhangs. See…
NEW Version. Cosmetic cleanup and sligthly better modelled. This is parts for ventilation fitting 110x55mm rectangle ventilation ducts to 100mm Ø ducts. Orientation for print will depend on printer and you may have to experiment with…
Various caps and lids for 100mm ventilation. The cap fits the joint parts while the lids fits the tubes. Joint parts have an outer diameter short of 100mm while tubes have an inner diameter of 100mm. See also other 100mm ventilation parts…
This is parts for 110x55mm rectangle ventilation tubes. See also other 110x55 parts https://www.printables.com/model/840511-rectangle-ventilation-110x55mm-angle-90-degree-upr And a 90 degree horizontal to verticla twist module…
These two mounts can be used to fasten/mount 100mm ventilations tubes. Unless you choose to glue the two parts together (not recommended), you will for both models need two SHCS M3x8mm and two M3 hexagon nut. The “holder model” is just…
This adapter can be used between 100mm ventilation tube and 75mm ventilation tube. The adapter fits into a 100mm ventilation tube and a 75mm ventilation tube will fit into the other end. See additional parts in my ventilation collection .
NEW Version. Cosmetic cleanup and slightly better modelled. Conic fit for Ø 100mm duct. This is parts for ventilation fitting 110x55mm rectangle ventilation ducts to 100mm Ø ducts. Orientation for print will depend on printer and you may…
This is parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. These models are 3-way links for rectangle ventilation duct 110x55mm If you need a mirrored…
New version. Smaller cosmetic changes for a nicer look. and easier print. These models are parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. See also…
This clip can be used to cover and hold in place cables in the slit of a T- and a V-profile 2020, 2040 or 2060. It comes in two variants with cover being 1mm or 0.42mm thick. the cover is 20x20mm for both variants. You can scale it in one…
This wall plate for 100mm ventilation tubes can be used to ensure a good finish connecting the tube through a wall. See also other 100mm ventilation parts in the collection 100mm Ventilation .
This is parts for 110x55mm rectangle ventilation tubes. Orientation for print will depend on printer and you may have to experiment with support. The model is available in two versions (male/female or inner/outer fit). Please note you can…
This is parts for 110x55mm rectangle ventilation tubes. Orientation for print will depend on printer and you may have to experiment with support. The model is available in two versions (male/female or inner/outer fit). Please note you can…
This fume extraction hood/head will fit a 75mm ventilation tube. You will in addition need a M3x20 bolt and a M3 brass insert. ALternatively you can glue a M3 nut onto the model, but that will be less nice looking. Hex bolt is…
110x55mm ventilation duct wall fasteners and one for 2020 alu V-profile. One of the models require a M3 nut to be inserted together with a hex 16-20mm SHCS (hex socket head cap screw). See also other 100mm and 110x55mm ventilation parts…
This is parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. These models are 3-way links for rectangle ventilation duct 110x55mm If you need a mirrored…
This is parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. Here is an example of a duct angled 45 degrees for better print and result with overhangs.…
Print new wheelbarrow handles. The two current models fits a opening diameter of 25.6mm, but you can in your slicer scale in two dimensions to make it fit your requirements. The 25.6mm is a tube with a diameter of an inch plus thin paint.…
This is parts for 110x55mm rectangle ventilation ducts. To be used connecting two ducts with a magnetic coupling for easy parting. On the image below, wall mounted duct is connected to a duct mounted to the backside of a Voron 2.4…
This is parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. This model is a 3-way links for rectangle ventilation duct 110x55mm. It was updated on June…
Ventilation tube 110x55mm straight. To be printed standiing up. Scale slicer i Z-axis to get the length you need or want. In addition to the tube is a female/female part you can combine with the male-male tube of the 110x55mm ventilation…
This is a lithophane. To view add light from the back. For best result, slice for low layer height (0.1-0.2mm) and 100% infill. To be printed upright in landscape mode.
75mm ventilation tube 2-axis swivel joint able to rotate in up to 3 points. Will sleeve 75mm ventilation tube in both ends. You will additional need: 2 x M3 nut 2 x M3 x 24 bolt. Superglue. Model 1, 5 and 6 are to be printed twice.…
You will need to add M3 Brass Inserts. You may choose to add two 2.5mm or 2mm brass inserts, but you can also use two bolts to keep ADXL345 board in place.
This is a base/fixture for the architect lamp. You will need a lamp and the 90 degree angle metal clamp . The hole for the lamp has the diameter of 14mm. The diameter for the metal clamp is approx. 7mm. If you need other sizes an can't…
If you have an older Danfoss thermostat with broken tabs, this model may help repairing the thermostat so you can use it again. If any of the tabs remain, you will have to cut them off and grind/polish the surface the tabs was on. On the…
You can now 3D print the lock nuts for a generic garden hose coupling. Material: PLA, PETG, PC, ABS, ASA or Nylon. Nozzle: 0.4mm nozzle and line width or finer (smaller). Parameters: 100% fill or enough walls, top and bottoms for 100%…
This impeller fits many variants of the Flymo Lawnmover. This is updated version 1.1. The first version would slice with layers missing in the top model and the full model. The bottom model is unchanged. Before printing the larger parts,…
Parts for connecting 100m ventilation ducts/tubes. Here the part is a 1 inlet to 4 outlets in a cross configuration. Orientation for print will depend on printer and you may have to experiment with support. These can be hard to print…
Parts for connecting 100m ventilation ducts/tubes. Here the part is a 1 inout to 2 outputs for placing in a corner of a room. Orientation for print will depend on printer and you may have to experiment with support. These can be hard to…
Parts for connecting 100m ventilation ducts/tubes. Here the part is a 1 inlet straight to an outlet plus 2 other outlets. Orientation for print will depend on printer and you may have to experiment with support. These can be hard to print…
Parts for connecting 100m ventilation ducts/tubes. Here the part is a 1 inlet to 3 outlets in a cross configuration. Orientation for print will depend on printer and you may have to experiment with support. These can be hard to print…
Wire cover and assembly. For outdoor wires for garden tools such as lawn mowers. If you cut the cable, you can use this to assemble cable again. The assemble consists of two models that both need to be printed twice. The current model is…
Inner Door handle frame V3 for all BMW E36 models. Print Left or Right model as you need them. This is the full version. Please consider uploading a photo of a make and make a rating. Recommended material is black ABS or black ASA…
These are all currently available results.
