Counting matching models…
Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…
Cable routing on the RatRig V-Core 3 is a mess due to the sheer size. However, since there are 3030 extrusions everywhere, it's just logical to tie the cables down to those. My requirement was that the clip is easily insertable and…
This test was built to test stringing under unfavorable conditions in the minimum amount of material possible. I designed it because I had consistent stringing issues and printed larger stringing tests over and over, wasting about 2kg of…
This Model is a free-form designed Fun Fair attraction that is known under a lot of names, like “Crazy Dance”. It can be easily printed on most 3D printers (biggest part is <20cm wide) and has only one part that requires support. Since I…
I broke one of our shower hooks. Since I was too stupid to look for already existing designs first I created my own xD Made in OpenSCAD during a stream, so pardon the less-than-optimal coding style ^^ Print Settings Printer: JGAurora A5…
The mesh of the original crater was so broken that Cura outright refused to slice it. I cleaned it up in Blender and reduced the vertices count on the bottom. I also increased the height a little so that the crater bottom does not clip…
The Framework 16 is an awesome laptop, but you can clearly see that the creators are still new to the Laptop Design Business. For some inexplicable reason, the laptop has a very hard and sharp edge underneath the bottom that makes it very…
Very useful, always out of reach. We have two of those electric flyswatters, which incapacitates small insects with a satisfying “Bzzzt”. However, they're always in the way and never in reach when you actually need them. With this…
This is a drinking bowl for small animals (We use it for our snails). It features two separate compartments, one 13mm deep, one 5mm deep at a total height of 15mm. I created it in OpenSCAD and also attached the scad file but beware: The…
This is my first entry for a contest. The Companion Cube was imported from here: https://www.printables.com/model/280778-companion-cube/files Unfortunately I could not print it as my filament is currently fighting me, but printing on the…
Just a quick drain sieve I threw together because our landlord didn't give a hoot about providing an actually functional sink. Print right side up so the support remains isn't visible when in use. As always, FreeCAD file is included.…
My son wanted a bladeless fan. Since he and his sister are very young I felt uncomfortable with the fan being reachable from below. Also I wanted the power cord to be pluggable. This is slapped together fairly quick with FreeCAD and is…
This is a remix of a model I found on Thingiverse: https://www.thingiverse.com/thing:3324671 I needed a spool for sample size Filament (50g), that also fits on a spoolholder designed for normal size spools. The original's inner diameter…
This is 100% the tank from WindhamGraves, I just individualized the parts for those of you that have (like me) issues with printing multiple parts at once but lack the skill to cut the file yourself. Enjoy :D Print Settings Rafts: No…
This Flower box holder is capable of holding a flower box on a thick balcony railing. It is designed that even during a storm, the flower box can only fall onto the balcony (and not onto people walking underneath)
Our Bosch Dish Washer has a foldable dish rack that tends to bend outwards as more dishes are loaded. This small print prevents this by clipping to both rack bars and keeping them at a fixed distance. I HIGHLY recommend to print this bar…
The RatRig V-Core 3 is a beast. Everything is designed extremely sturdy and thought through. For some reason however, the X Endstop Block makes the exemption here. For some reason it is designed in a way that you cannot screw in the screw…
This easy-to-print Peanut Can Lid can be clipped onto the can and then screwed shut so the peanuts don't pull humidity (and also to reduce the urge to keep eating ^^) The Part is designed in such a way that the sharp corner of the…
I wanted a 3D printable plastic model of Deus Ex but didn't find one. So I made one myself. :-) just take a length of thread and press that into the ball, then knot it to the stabilizer bar. Source file as always included, though this is…
I needed to do a couple of small part repairs and with the first part already lost a screw. So I fired up FreeCAD and cadded myself a small parts repair tray. The whole part is 20cm x 20cm and should fit on almost any FDM printer. The…
Empty your Tubes completely with style with this frog-shaped tube squeezer. Just insert the back end of the tube on the back of the frogs mouth and pull it through. The angled inset will squeeze any remaining content towards the front of…
We are currently planting a load of fresh plants in these mini greenhouses. Due to lack of space and the outside weather, we need to keep them longer in the greenhouses than we planned and the plants are already hitting the ceiling. This…
I'm running a JG Aurora and want to update the stepper drivers to TMCs, which require active cooling. I bought a 60mm Fan only to find out afterwards that I only had 5.0-5.5cm clearance for it. So I designed this part. The long neck can…
Yesterday morning I woke up and thought it would be cool to play around with planetary gears. Since this is the beauty of this hobby, this is what I did. This mechanism turns the two outer shells slowly relative to each other due to the…
I have a couple of OXBERG doors for several Billy Shelves around the house and the vanilla knobs (basically a short piece of wood without anything to grip on) are pissing me off daily as I frequently slam the doors shut because I can't…
We have a very small Guest bathroom with no proper place to put the soap. So I designed this soap dish. It mounts to any flat wall using two Tesa PowerStrip Small Double-sided adhesion strips. Since the strips are slightly longer than the…
For some reason, Colgate Toothpaste tubes have a really small cap, and where with other brands you can naturally put them on your shelve standing upright, with Colgate it's a balancing act, especially if you also have a squeezer frog (…
I needed a small compartment that was easily accessible to hold a couple of screws while I was installing a shelve in my office. I did not want to only be able to carry 2-3 and constantly having to get down the ladder, restock, and go up…
The pedestal fan I bought was cheap. So cheap in fact that they saved money by not including the cheap plastic part that you put over the foot to hide the screws. So I made my own :-) Prints without support, just place it face down on…
My parents have a rummikub game that is almost as old as me, and the stands started giving up. So I slapped together a quick stand. The print is intended multi-material, but you can also just remove the Text model and have the stand print…
While building my Printer, I kept misplacing my stuff (including my nozzle lol) and kept searching it all over my appartment. To mitigate that, I designed this tray real quick. You can simply bolt it under the top 3030 extrusion of your…
Last Sunday, I was streaming on twitch and - after being scared ingame - accidentally threw my nearly full glass over my laptop. To prevent near heart strokes in the future, I decided to do something about it. A friend suggested to get a…
A friend of mine needed a new Filament Holder. I also needed one so we designed one. The Design principles were simple: no visible mounting points Clip in wooden 20mm rods use space sparingly, the spools should not be unnecessarily far…
I had the feeling that my CoreXY printer was having precision issues that were tied to one motor. In CoreXY, each of the two motors for the X/Y movement control one diagonal, so having a model that runs precise diagonals allows for…
A while back my mother-in-law gifted me an Iron Man Amigurumi. However, since it can't stand and lying down it looks stupid I didn't really know what to do with it. So today I gave it a stand so I can have it float above my monitor.…
This allows you to train tying down a boat at a cleat. The Threaded pole takes a 7mm rope that can be clamped down with the screw head. Happy tying!
We have some sunflowers. These get pretty big and - due to small pots - the stem wasn't stable enough to sufficiently support them in high winds. This quick hack allows us to stabilize the sunflower against our balcony without having hard…
I needed a holder for my logitech cam that is supposed to film my printer which is run by Octoprint. However, my first approach (taping the camera to the shelf) did not work and caused quite some timelapses only to consist of parts of my…
When I routed my Network Cable through our apartment I simply forgot putting something over the drill holes BEFORE putting the cable through. Therefore I had to devise a model that allows me to run the cable through while holding firm…
A 10-minute Model I made because it sucks to clean up my cleaning robot. This model has a LIDAR cage on top so you can't place it on a flat surface very well and presumably it's also not very good for the cage. This model allows you to…
This is a re-upload since my original thing got swallowed by Thingiverse! The JGAurora has a 90cm Bowden tube. This is a lot. This thing enables you to mount your extruder to the side of your printer, allowing you to shorten the tube to…
Shoehorn holder. Holds Shoehorns. Tape the small part onto a wall using a Tesa Powerstrip (Small size should exactly fit into the small retract). Make sure the rounded corners are facing upwards. Next, simply slide the knob over the…
I made this model because my printer had issues to print low-tolerance moving parts in place (they would always meld together). With this model I figured out that most of my issue was an elephant foot, which was easily solved with going…
My Girlfriend is significantly smaller than me and can't reach the shower holder when it's at a height required for me to fit under it. In order for her to be able to place the head somewhere so that the bathtub is usable without 1.8m of…
The original STL for the fan duct was of such shoddy quality that I couldn't even autorepair it using meshlab or online tools. It had around 12000 Vertices (fixed version: 2.570), tons of flipped normals and a shitload of non-manifold…
I needed something that could securely hold the pole of my stream lighting equipment. Up until now, I used a pair of locking pliers to prevent the rod from falling over but that took away a lot of space under my screen podium. This holder…
I am expanding my RatRig V-Core with a MMU and for that I need to route the PTFE tube differently than before. With the kit came a 90° turn that was flat on a 30x30 extrusion, however I now need to route the tube perpendicular to that.…
I had a bunch of sticks and SD Cards flying around on my desk so I designed this holder. It screws under my monitor stand with 3 3.5x16 screws and can hold up to 5 sticks that cover their USB port and 5 which expose their USB port. For…
There are two Models here A blind clip that allows routing of cables inside of the Extrusion A Clip that holds a single RGB LED Both clips grip pretty tightly into the extrusion and won't move laterally easily. Can be printed without…
These are all currently available results.
