Counting matching models…
The original model was impressive. The author vandragon_de has made a version without holes for bathtube use, but it has some missing solid geometry at the propellers, so that it won't be properly sliced(with CURA). so I fixed the issue.…
There is a small issue with the original design: when you fold the stand, the arms are not getting stabilized, they are easily swing back and forth. I utilized the design with some small tweak to make the arms stay put when folded. If you…
I made the original DeSteiner M1887 2 years ago, and recently I revisited it, so why not making a variant with stock and a long barrel? I combined barrel-tube part 2 and 3 so that I don't have to assemble them and to reduce connection…
Box for dart storage, best for half length dart. 5*8 storage. Box for UDL 12 CA shotgun shell storage. 4*5 storage. Category: Sport & Outdoors
Personal modification for Leblasto Scully V2 You can purchase and get the blaster files here . This is a small mods for the Scully V2: The muzzle: just glue it on like the stock orange ring Space marine emblem: glue to anywhere you like.…
Custom shell for UDL XM1014 foam dart blaster. There print options: One-piece: print the whole shell in one piece Two-piece: print shell case and the head separately Three-piece: Shell case, shell head and the seal insert Print guide: For…
An adapter for installing VORON Stealthburner toolhead on your Creality CR10S-Pro (if V2 shares the same X-carriage plate, then it works for V2 as well). Just use this adapter to connect stock X-carriage plate and the SB assembly. The…
Use drum spring instead of the mag spring. Drum spring with constant force is much cheaper and easier to source, also space and weight saving. Spring spec: 0.1 x 5 x 600mm Constant Force Drum Spring Only done 7 round and 13 round mags.…
A custom fanduct for the latest FLsun Speed Runner. It directs the airflow as low as possible, directly to the nozzle tip. Printing in ABS or PETG is highly recommended for high temp resistance. But PLA works also just fine. Tree support…
Inspired by the talented design by jootoole ( https://www.thingiverse.com/thing:5214891 ). Made specifed for Delonghi EC680/685/885, or other 51mm portafilters (not tested). 2 slots for portafilter. The 1st mount slot for stock…
This is an addon modification for Ehdrien’s Gecko foam blaster. You need to purchase or assemble your own Gecko in order to make this Mag Release work. Ehdrien's Gecko: Link Extra Hardware you need: A spring in 5mm diameter, 18mm length,…
ADI Chrono A custom case for HT-X3006/3005plus chronograph (24mm) ================================================================= FEATURES A case with style 3 parts build, ready for color combinations Tripod mount thread Direction…
Alternative angled talon mag specifically modded for Ehdrien's Gecko blaster. Key features: Use rectangular mag spring instead of drum spring Enabling slide lock when the mag is empty, preventing from empty fire Ammo check windows…
Remixed k1nb0te‘s cable chain carriage part with a filament tube support from Portzal's Hotend Cable Keeper. (works on Creality stock hotend) Also tightened carriage's mounting tolerance a little bit; cut a corner in order to avoid…
Trying to mount the VORON Afterburner direct drive print-head to CR10S-Pro with stock gantry plate. Based on VORON 2.4 Afterburner tool-head. http://vorondesign.com/ for more info and original STLs You need almost everything that requires…
Designed for Huawei Qi wireless charger CP60 Remodeled specifically for iPhone Xs Max (with phone case). Should also works for phones in similar sizes without resize the model. Tested on iPhone X, XS, XR. All working perfectly. 05.30.2019…
Shell Rack for UDL XM1014 (Benelli M4) blaster. Just replace the stock picatinny rail with this print. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Sport & Outdoors
Inspired by the talented design by jootoole ( https://www.thingiverse.com/thing:5214891 ). Made specifed for Breville/Saga Barista series, BES870, 872, 878, or other 54mm portafilters machines (not tested). 2 slots for portafilter. 2…
4020 radial fan guard specifically for Creality CR-10S Pro, working with stock fan duct and its variants. Also works perfectly with Hero Me 4020 air pipe/fan duct。 Mount with 2x M3*18 screws 1x M3*20 screw bolts are needed in case of Hero…
Connecting Pin: sand if neccessary Assembly: apply glue if neccessary Credit to Kai who made the original snap-on steam lever with CAD files. The original works pretty good, only the unibody one looks less charming, and the classic…
The stock reloading tube has a capacity of 5 shells. With this simple cap spacer, you are able to reload one more shell - up to 6 shells. It's just a simple piece to print and a very simple solution. In my case the 3.5mm height works…
4 mount holes for 8x2mm magnets. You need to glue the magnets into the holes. Category: 3D Printer Accessories
Doesn't the trigger hurt your finger every time when you pull the trigger of your beloved firefly? This is a small mod for thickening the trigger, so that it won't hurt your finger anymore. Print guide Print vertically on the bed, apply…
A remix from Buck Converter Box (LM2596) by LDG92, open ends without rail mount. Customized specifically for CR10S Pro. The original mount box design is already snap fit/screw free, I just added two mount holes for 6x2mm magnet , so that…
There is this bug on Kirin Type-A first batch, the mag could've been over inserted, and stops bolt closing. It is said the later batch would fix this problem by the manufacturer, but here is an easy fix solution: Just add this 3D printed…
Update 2020/05/05 There was a small bug on the original Gen4 ABL mount, that the gantry won't hit the X limits switch. A revised version is updated to fix this issue: Gen4_Stock_ABL_mount_for_dual_5015_Duct_M12_fixed.STL If you have…
FEATURING The Sniper Barrel with Colonel Wasp Firefly Shell Adapter for the Breaking Wind Key features: Sniper barrel with alu inner barrel carrier Take Colonel Wasp shels Stylish barrel shroud optimized for R-SCAR mini (by Rmod74), also…
Cheap hydrometer that I used:
A shadow box art of 美依礼芽 MARiA @GARNiDELiAɞ (maria_grnd) on the performance of Floral Sea (花海）from the show Sisters Who Make Wave 2023 (乘风2023). You'll know what's this if you know MARiA or the show. [Print Guide] 0.2mm layer height…
Links to Hero Me Gen4 by mediaman https://www.thingiverse.com/thing:3433619 https://www.thingiverse.com/thing:3182917 This is an update version of my previews LED bar mount for Hero Me gen3 ( https://www.thingiverse.com/thing:4254593 ),…
No hardware required Adjustable cam angle +10/-5 degree The webcam that I use:
The further develop of this mod is suspended due to the release of Zinc 2.0. But it should work just fine. No further comment. Category: DIY
Just updated the part cooling duct on my CR-10S Pro from Hero Me 4020 single fan to 5015 dual fan. A great benefit beside better part cooling is a better view to the hotend nozzle. So I designed this LED mount specifically for HERO ME…
Just added holders for 0.2mm Feeler Gauge and Hot-end Cleaning Needle. For the Needle, there are 2 places to hold, choose on your own preference. Print settings is the same as the original design. Category: 3D Printer Accessories
I do like Lonelslander's original design, with a 30 degree fan angle it optimizes air flow more directly towards the mainboard. But I came across 2 major issues printing his fan holder: Screw holes misplaced a little bit, so I can't…
I am using Hero Me hotend mount, so that the original left tower part doesn't fit my setting. I customized this tower part to put the cable mount pillar in the center. If you have same cable issue, just try to use mine central tower. You…
These are all currently available results.
