Counting matching models…
Last minute print for the year ;) Set to 3mm height scaled to 70% in slicer (effective height 2.1mm) 100% infill Octagram Spiral has a nice effect on the top surface! I printed it in PETG, because I had no PLA in green color…
Holder for up to three oral-b iO toothbrush heads. The heads hang freely, so water can drip down and the full head can dry.
Ben Horne explains the usage of such a tool in one of his videos: I printed it in 0.1mm layer height and Urban-Gray PETG. (Gray is essential to have a neutral color for the scene - some say it is good to have it two sided with gray and…
A spiral design, created in FreeCAD using the Curves workbench and mainly the Sketch on Surface and Gordon Surface feature. Fits a 90cm high tree very nicely. Printed in PETG (because I had no PLA in that color) with 0.1mm layer height,…
This is a stand for a cheap T12 clone soldering iron. Printed the base with 100% Infill to make it heavier.
Remixed model to add more tolerance to fit new variant of the original model
For a 24mm diameter hose. I used zipties with 3.2mm width and 1.5mm thickness. Use the FreeCAD file to create your own heights. Base model and heights from 1 to 8mm are uploaded.
Note, that the Black & Decker side is quick and dirty… I eyeballed the angle, which turned out to be a bit more shallow. It is also not as long as it could be - but I wanted to spare some minutes printing time. The shoulder inside is not…
Is it overengineered? Yes. Can you overengineer it even more?! definitely! Requires a 3030 M5 t-nut and M5x12 screw, optional a 2.3mm wide cable-tie. I wanted the x-axis motor cable to run close to the extrusion profile, thus I sketched…
I used "Concertomeister Baso" ( https://www.amazon.de/dp/B01MXW4BGR ) however other products should work as well. Edit the CAD model for different type. (btw, if you wondered: They have brown stains because of an espresso accident ;))…
Printed in PETG. Used 100% infill for the clip and a 100% infill section for the screw for better rigididy. This tripod mount requires extra hardware: 2× M4×65 screws 2× M4 Inserts 1× 1/4"-20×12.7 insert (a shorter one can be used too and…
There are two versions of the plate: A fancy one and a simple one. The main advantage of the fancy plate is that it is fancy. Its disadvantage is that the timing of the screw needs to be perfect - which I cannot guarantee works for you! I…
Coat hook that can be clipped onto a 65×170mm parapet duct (mine measured to be roughly 66×172mm). Original FreeCAD file is attached, to change the dimensions to your duct.
I printed that years ago and never published it… To avoid beans to popcorn into the slit, I put a piece of cardboard into the hopper. Fits a Vario Home v2 from around 2012.
Is it bulky? Yes! Does it have unnecessary space? Yes! Do the screw holes do not line up with the ESP? YES! Well, bulky and much space was on purpose - the idea was that maybe in the future I wanted to add more boards... The screw holes…
Mirror the parts for the other side! I deliberately did not model the clips for the MITTLED because they are awful to print. I used a 40cm stripe for the top and two 30cm stripes for the sides.
These are all currently available results.
