Counting matching models…
This is a skeletonized version of the improved k1 toolhead cover This is pretty much as minimal as I could make it while still having the required mounting holes and fan ducts Way lighter than the stock one! Print Settings Tree or Organic…
I saw some other lighter + cigarette cases out there and decided I needed a waterproof, or at least water-resistant, case. I call it the Frog Case because when opened the inside holes make a sort-of frog face. I don't smoke tobacco…
I received a request on reddit to make a case for the Xmax v3 Pro. The lid is fairly snug and has a nub that keeps it from sliding off on it's own. The body is slightly tighter than the cap so only the cap comes off when opening. I made…
I designed this product so I would not have to fiddle with a cable to charge my XROS 3 vaped during the day, and had a place to store my extra pods. The dock utilizes the USB-C cable that comes included with the XROS 3 so that there are…
My Harmon Kardon Onyx Studio 4 fell off my car and one of the legs broke. Instead of just making new legs I decided to make it better. I designed a grippy handle that doubles as a stand (two position) I printed this out of TPU with 10%…
This slides over the top of a XMax v3 Pro flower vaporizer. It lines up with the oven so you can fill it more easily without getting crumbs all over
5015 blower fan shroud for K1 and K1 max way quieter than the stock fan, 100% sounds like stock's 20% I didn't use heat inserts like the original, I used bolts and nuts instead I originally printed mine in PLA+ but it got a bit warped…
This guy let's you connect your XMax v3 pro to any glass piece that accepts a 14mm bowl. Printed in TPU so the vape is held snug but easily removed by tilting to the side
This is a smell-resistant case for your papers, lighter and weed. It fits a clipper lighter and 1 1/4 inch papers. Print the gaskets in TPU and they will provide a bit more of a seal. It is not waterproof, but definitely water resistant.…
This allows you to charge your Galaxy Watch6 44mm standing up. It is fairly small and has a channel for the cable to be discreatly routed out the bottom and back of the dock. I suggest using double-sided tape to adhere it to a surface so…
This is a right angle PTFE bracket that let's you feed filament from the side of a Creality K1 or K1 Max I made this for printing multi-color with the 3D Chameleon. This allows me to have 2 of the 4 spools on the left side of the printer.
I am uploading this to share my code for the 3D Chameleon that uses an additional stepper to achieve 8 color printing. This was created by timb8907. We have been chatting back and forth and this is the most reliable code for the K1 Max I…
I remixed this two part mount to be a one-part mount for the Galaxy Z Fold 3. It should also work fine with the Fold 2. It fits in the dash cubby hole in my 2015 Kia Optima, and other kia models with the same hole. It fits the Samsung…
This is similar to my slim case but thicker, 2mm, and a kickstand
This dock allows you to route a USB cable into it so you can drop your XMax v3 Pro on it to charge. The USB-C hole is larger than most plugs on purpose so most will fit. Use a small amount of glue to secure the cable in place. I suggest…
This is a phone case for the Samsung Galaxy Z Fold 3 that accepts Razer Junglecat Controllers. There is also a slot for an S-Pen Pro You can use them in both portrait and landscape. I have made holes so the speakers are not blocked when…
This was a commissioned design by Reddit user GoldenSun3DS You can purchase this to support my work at FrogCase.store The versions with holes in the back are for cooling pads, as requested by the commissioner of the design.
I wanted a compensator that both wouldn't explode and would give me some muzzle climb reduction when shooting at high rates using binary triggers. There are no threads on the inside. I heated up the threads of the barrel and then screwed…
This is a phone case for the Samsung Galaxy Z Fold 3 that accepts Razer Junglecat Controllers. You can use them in both portrait and landscape. I have made holes so the speakers are not blocked when using it in landscape. Print Settings…
I use a strip of velcro to hold the y-splitter loosely so it can move around if it needs to.
This thing clips over either end of the mount that many blinds are attached to so you can hang curtains over them. There is a 14mm slot for a curtain rod and little nubs that correspond with the holes on the blinds mount. It is not 100%…
I made this to accommodate the volcano nozzle kit I bought for my K1 Max There are 6 slots for 0.4mm nozzles and one each for 0.2, 0.3, 0.5, 0.6, 0.8 and 1.0 mm nozzles The hexagonal holes are 7.2mm to accomodate 7mm, but it should work…
SCALE TO 4.08% This is a simple water-resistant Bic lighter case. There is a leash for the cap so it does not get lost and hole on the bottom for connecting a tether. I designed this in Fusion 360 based on my original Frog Case…
This lets you put up to 9 seedlings in a single net pot for hydroponics
This is simply a little cover for the left fan, which is exposed to filament bits falling in. it is very thin so you can use the same screws/bolts It is not required for the right side, but for symmetry you can mirror this file and…
This is a simple shallow funnel that replaces the metal disk lid in common 8oz mason jars. It's intended purpose is for turning a jar into an easy ABV collector that doesn't have to be opened each time, but also not easy to spill all over
Made the upper portion longer to accommodate a Samsung Galaxy Z Fold (all models) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 50 Filament: Jayo PLA+ Black Category: Mobile Phone
This is a koozie for 8.4oz redbull cans that is meant to be printed in TPU or any flexible. I used Siraya Roamr TPU Air 80A, and printed at 260C for maximum foaming
This is a replacement part for the Double 3DC by Tim B. I noticed when one side was lined up, the other side was not. So I cut it up in CAD and lined everything up and now the sides are perfectly aligned! Hoping this is the final piece in…
I basically took this great-fitting model and modified it to my liking. any sharp edges have been smoothed and holes are now only as big as they need to be. The fingerprint reader is WAY easier to use now, due to the cutout in the…
this is just a longer ‘top’ part from the original design for normal phones. This is tailored for the OnePlus Open but can work for any foldable or small tablet.
Orca/Prusa slicer post-processing script that inserts random color changes. I created it to do more realistic wood-like prints, using 3 different shades of wood filament. Your printer uses T commands already? (most likely) Use Normal MMU…
This allows you to play racing games which utilize gyroscopes for steering. Designed for the OnePlusOpen, but may work for other foldables. Requires the phone to have magsafe compatibility, I used a stick-on metal ring Also need to get a…
These are all currently available results.
