Counting matching models…
Harmonic Drive for Keen-One EQ This is a variant with finer teeth (module 0.5) and can be printed without supports. The CircularSpline has 160T, the FlexSpline has 158T. The gear ratio is 79:1 With the 17HS15-1684S-PG27 from OMC…
This is a VORON style endcap for Misumi Voron 2.4 2020 Extrusion.
90:1 compact high reduction harmonic drive I wanted to build a Harmonic Drive gearbox that was as small as possible and had the highest possible gear ratio, and that's what came out of it. A 90:1 high reduction Drive. Another goal was to…
Polar Wedge with linear gearbox This is a little but solid polar wedge for astrophotography. I designed 2 versions of the Base, one with a 1/4" hole to mount it on a arca-swiss plate and one with a Arca-Swiss Base but the Arca-Swiss Base…
Each filament shrinks a bit after printing and then you don't have to be surprised if the dimensions are too small. You can do something about that... With this model you can calculate the shrink factor of your filament and later create…
44:1 compact harmonic drive I wanted to build a Harmonic Drive gearbox that was as small as possible and had the highest possible gear ratio, and that's what came out of it. Another goal was to design a flexspline that works almost…
A Hi-Res M48 x 0.75 dust cap for your 2" astronomy gear. Screw the ring into a cap and you have a male threaded cap. Print it in 0.1mm layer height and you get a super fine thread. I had to scale the ring down to 99% in the X-Y axis in…
Knurled knob for M5 socket hex screw Make your own knurled screw! Print the knurled knob then press in an M5 or M6 (DIN912) socket hex screw. That is. 2 M5 versions: height: 7mm outer diameter: 19mm height: 6mm outer diameter: 16mm M6…
HEQ-5 tripod clip A simple clip for storing or transporting the Skywatcher HEQ-5 tripod. This keeps the tripod legs together I printed it with 5 walls and 0 infill Happy printing :)
Extender for Stepperonline 17HSxx-xxxxS-PG27 It was hard for me to get the steppers from the BOM of the Keen-One EQ mount, I also had two 27:1 geared steppers from another project (Stepperonline 17HS13-0404S-PG27 0.4A/28.5mH) and I have…
Primary Mirror Mask for newtonian telescope: GSO 150/600 f/4 TS Photon 154/600 f/4 Orion Optics 150/600 f/4 This is a set with a mask and 3 TPU-Mirror clamps. i designed the parts because the original brackets protrude too far into the…
VORON Probe Mount with ADXL for PCB Klicky Use the free space above the PCB Klicky Probe for an ADXL! This mount is a new variant of: https://github.com/tanaes/whopping_Voron_mods/tree/main/pcb_klicky ADXL345: https://amzn.eu/d/dJvU8Zh…
Knurled nut for M6 hex nut Height: 18mm* knurled diameter: 22mm bottom diameter: 13,6mm * You can also scale them in the Z axis ;) Happy printing!
Anker 737 PowerCore 24K bracket for HEQ-5 tripod Fits tripod legs with a diameter of 44mm Powerbank: https://amzn.eu/d/8yI4wjq 24000mAh Happy printing!
A Hi-Res M42 x 0.75 dust cap for your astronomy or normal photography gear. Screw the ring into a cap and you have a male threaded cap. Print it in 0.1mm layer height and you get a super fine thread. I had to scale the ring down to 99% in…
I printed some parts for my Newton Astrograph. This astrograph is based on the TS-Photon 154/600 f/4 Newtonian telescope, identical in construction to a GSO 6". I featured the astrograph on my blog and there were requests for the parts.…
Spider Laser Tool For 150mm (6") newtonian telescope Fits perfectly on: TS-Photon 6" 154/600 f/4 GSO 150/600 f/4 Orion Optics 150/600 f/4 Align the secondary mirror in the middle of the tube quickly and easily! Insert your laser…
A case for your Astroberry project This rugged case is for a Raspberry Pi 4B with a mounted heatsink like this one: https://amzn.eu/iCX0Fwg or https://amzn.eu/hAALRce This case has outputs for the 4 USB-A ports and the USB-C port.…
Mini handle for Keen-One EQ Small, practical handle to mount the Keen-One EQ mount more conveniently on the tripod. The mini handle fits the existing threads of the Keen-One EQ mount
Anker 737 PowerCore 24K bracket for 25mm or 28mm tripod Fits tripod legs with a diameter of 25mm or 28mm Powerbank: https://amzn.eu/d/8yI4wjq 24000mAh Happy printing!
BAADER Diamond Steeltrack BDS-NT Base Adapter Adapter plate for a 150mm (6") Newtonian telescope to mount a Baader Diamond Steeltrack BDS-NT Focuser. The small hex nut adapters are provided for the inside of the tube. Fits on: GSO 150/600…
This is a compact and mobile power supply that can be operated on any Powerdelivery / QC compatible USB-C power supply or power bank. BOM: Buck Boost Converter: https://amzn.eu/d/dlvy297 PD/QC Triggermodule: https://amzn.eu/d/7sku02Q…
DIY focuser for astrophotography with a magnetic flange This is a simple, inexpensive focuser with a magnetic flange for quick and easy assembly without tools. When I was looking for a cheap way to get a focuser, I came across a project…
Baseus power bank bracket for HEQ-5 tripod Fits tripod legs with a diameter of 44mm Powerbank: https://amzn.eu/d/7fbQGof 20000mAh 65W or another powerbank with max. size of 65 x 27 mm Happy printing!
HEQ-5 Tripod Adapter With this adapter you get a 1/4" or with a thread adapter 3/8" camera thread on a HEQ-5 tripod. I use it for astrophotography and screw an Omegon polar wedge on it. The adapter is 2 pieces, the bottom piece includes…
MTF (MagneTicFocuser) mount for the Hexafoc focuser This is a mount to magnetically couple the MTF to the telescope. It fits on all Hexafoc focusers such as the ExploreScientific ED80 or identical focusers. Link to the MagneTicFocuser…
This is a simple and flexible springloaded holder for a filament runout sensor like this: https://amzn.eu/d/2guAeah For mounting on a 2020 extrusion. See the pictures, its easy :) You only need a M3x10 Screw and a M3 T-Nut. Because of its…
Can't loosen a spacer ring or filter? No problem, use this tool to loosen your 2 inch astronomical accessories. With a layer height of 0.2mm, 5 perimeters and 100% infill, it is made of ABS, for example, and is very stable. Use a stable…
MagneTicFocuser [MTF] without electronics This is a second variant of the original [MTF]: https://www.printables.com/de/model/251874-magneticfocuser-mtf I designed them to run this system on an OnStep controller. OnStep offers the…
EAF to [MTF] Adapter Maybe you already know my [MTF] system that magnetically holds a focuser on the telescope. I still have one EAF left but already upgraded my telescopes to [MTF] so i made an adapter for the EAF so i can use it however…
Clutch knob for RA and DEC on a Skywatcher HEQ-5 Are you also bothered when you want to balance your mount and the lever of the clutch turns the clutch to stiff due to its own gravity? Replace the lever with a round knob and it won't…
Plug-In Cooling Duct for Bigtreetech Kraken Due to space constraints, I need a blower unit that mounts from the clamping side. There are some nice models available, but unfortunately, they're always mounted from the other side. Here's my…
MTF [MagneTicFocuser] mount for BAADER Steeltrack focusers This is a mount to magnetically couple the MTF to the telescope. It fits on all Baader Steeltrack focusers. Link to the MagneTicFocuser [MTF]…
Different dovetail for the controlerbox on the Keen-One EQ I wasn't entirely happy with the dovetail on the Keen-One EQ mount. The controller fell off once. So I designed a new one with a bit more length and a face that the screw can't…
I always use an Arca-Swiss clamp for my guide scopes, so I designed a new rail on which you can mount a 50mm long Arca-Swiss clamp. This is easier, lighter and cheaper than the astronomy clamp with astronomical prices ;) BOM: 4x M4…
My tuning set for the genius design of Heavy Duty Planetary Astro Tracker Gen 2. Remix from: https://www.thingiverse.com/thing:4889007 With these parts it runs very very very smooth and what you need is: 24 bearings 688 2RS 8x16x5 mm I…
L-Mount with Knob for Heavy Duty Planetary Astro Tracker https://www.thingiverse.com/thing:4889007 This is a L-Mount with a 3/8" hole on the Tracker side and a 1/4" hole on the Ballhead side. You can also screw a 12mm counterweight shaft…
I needed a dustcover for my Explore Scientific Refractor Telescope, good thing there is 3D printing :) M68 x 0.75 thread for Hexafoc or maybe other focusers Print it in 0.1mm layer height for a clean thread
This is a under desk mount for a D-Link DGS-1008P PoE Network Switch with a optional Cable hook Happy printing!
An adapter to mount a Baader ClickLock on the Hexafoc focuser (Explore Scientific) (or similar with M68 thread) refractor telescope. The adapter has an M68 x 0.75 internal thread and an M54 x 1 internal thread. Optical path is 10mm. With…
Illuminated polarscope with arca-swiss I use this polarscope for my small Keen-One-EQ mount, which does not have a polarscope itself and the tripod with polar wedge has an Arca-Swiss clamp. Before the mount is put on the tripod, I first…
When space gets tight, parts need to be repositioned. I'm upgrading my little Voron 2.4-250 from a 24V Octopus setup to a 55V Kraken setup. The larger components make the electronics compartment very cramped, and I have to reposition some…
Philips HUE Tap Dial Switch Pod with magnets. You will need: 4x magnets 6x3 mm 1x M3 screw, 8 or 10 mm long 1x M3 heat-set Happy printing!
I have my guiding telescope on an Arca-Swiss mount. It's a cheap, compact, small and safe way to connect it. This adapter connects Arca-Swiss to the Explore Scientific system. Printed in ABS 5 perimeter 100% infill Happy printing!
When space gets tight, parts need to be repositioned. I'm upgrading my little Voron 2.4-250 from a 24V Octopus setup to a 55V Kraken setup. The larger components make the electronics compartment very cramped, and I have to reposition some…
Caps for the polarscope and a tool to screw it tight or loose. For: https://www.thingiverse.com/thing:4889007 PolarscopeCap_F - is for front / Rectile PolarscopeCap_B - is for bottom Happy printing!
Build plate holder for 8 plates. 1 x 2.2 mm 1 x 1.8 mm 6 x 1.2 mm Depth is 250 mm, but you can of course insert longer plates. Printable on a 250 x 250 mm plate. Happy printing :)
I designed these clips because the ones supplied with the MIK spring clamp were intended for an 11mm frame, whereas my MIK frame has a diameter of 13mm. I printed these clips using PA12 CF15. Happy printing!
These are all currently available results.
![MagneTicFocuser [MTF]](https://media.printables.com/media/prints/251874/images/2262095_7bd3d163-9887-4ca1-929f-f1d37ed8fc1b/magfoc_pg27.png)
![MagneTicFocuser [MTF] GX12](https://media.printables.com/media/prints/344483/images/2935363_da8b2c08-f1fe-4c78-aed0-c6490a1b7bd8/mtf_gx12_front.png)
![EAF to [MTF] Adapter](https://media.printables.com/media/prints/301653/images/2636895_46ecfca1-b3aa-47cb-b54e-4a0d8be65089/mtf_eaf_adapter.jpg)
