Counting matching models…
Printable tree topper for mega trees You will need: 1 x 3D Printer with a 300x300mm build plate 4 x M4X6X6 Threaded Inserts (Tho you could drill the holes all the way through and use 4 bolts 4 x M4 Bolts of sufficient length to mount 8 x…
Wanted to provide more accurate temperature and humidity readings for my home weather station by moving the Ecowitt WH32 sensor out of the patio (lots of concrete around) This is a modular press fit radiation shield that'll hold 2 WH32…
A customisable cable number set.
Have made the switch to Klipper, wanted to make use automatic resonance measurement which requires mounting an accelerometer to the printer. Hopefully this is rigid enough (I printed it in PETG but probably should have printed it in PLA.…
This is a completely remodeled 220 MM version of the flat printing disc, you'll probably need the Cheater adapter from the original. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category:…
Wanted a star I could print for my Bunnings Spiral Obelisk, and I'm too lazy to split a string of 50 pixels into 30, or 25 so I spent 3 days (off and on) drawing and laying out the pixels in this - twice cos the first time I forgot that…
A top for the 4x3 Multibin that holds the Bambu Labs H2D Parts tray, the filament swatches, and 2 extra hotends
My friends forgot to remove their mount from the rear windscreen and needed a new one... Rather than paying $15 + shipping I just knocked this out, partially from memory. I've provided two models, one that sorta follows the lines of the…
Mount your JetKVM's high up on your multiboard with this peg mounted JetKVM Holder. I have included a 3mf that hopefully has the supports but I found the best way to print this is with the back face on the bed (the back face being the one…
A base plate for 32mm OD LDPE airseeder hose together to form an arch. It's a pretty good fit, not tight not loose, but I put holes in so you can screw your airseeder hose in. There's 4 spaces for pegs to peg it to the ground, 3 spaces…
Last Christmas, I realized I needed an additional vent (actually two, but this is one of them) for an electronics enclosure that ended up getting more sun than expected. I ordered one —specifically, the one that inspired this design— but…
So, I have a new (my first) car, and it has a rather lot of boot space which is awesome, except usually I have next to nothing in it. I wanted a way to keep one or two odds and ends secured in there in such a way it wouldn't just fly…
A clip on fan for the K8200, I made it and use it for cooling the extruder stepper driver. Modified the K8200/3Drag Frame Clip from Area51 to hold the fan, and borrowed his locking pins verbatim. Instructions Print, screw together, clip…
This is a parameterised version of a bracket I made for myself, due to people looking for such brackets I figured I'd make an easy to modify version and upload it. Sorry about the variable naming, that's hard but for the most part you'll…
What Remixed parts for my CR-10S Pro V2 based on the following: Hero Me Gen 6 Base ABL plate I haven't opted to use the remix button as I can only credit one design. Why By the time you put the full Hero Me adapter/base plate and squeeze…
I have two identical roller doors in my garage, each have this 4 pin green terminal block that you can unplug but no-where suitable to actually mount anything on. These terminal blocks are only friction fit but they're tight enough to not…
Wanted to mount a can of mozzie repellent out front of our Christmas lights show for people to use. This is my answer to that. Key considerations were for it to mount reasonably securely to the top of the post and have adequate drainage…
Nozzle Cam for the CR10S Pro V2 - It should fit on anything that has the same fan shroud. Camera module itself can be found here https://www.aliexpress.com/item/32832909804.html Print Settings Printer Brand: Creality Printer: CR-10S…
The Brutus 8mm x 1250mm Yellow Site Stake commonly found at Bunnings Warehouse in Australia - along with some black spray paint - makes for a relatively inexpensive mount for core flute Christmas props, it isn't very stiff and may sway in…
As part of my ongoing quest to Multiboard all the things I've been working on making the pantry less... well less of a dumpster fire. To that end I'd like to share my Cup Noodle Shelf for those 70g cup noodles. Included in the 3mf is the…
Load into slicer, flip it so the bridge of the clipBody is on the bed with the pin pointed up, rotate the clipPivot so that the bigger loop is on the bed. you're going to break a couple of clipBody's so print extra. Use 2x2.5mm zip ties…
These are all currently available results.
