Counting matching models…
This is a 2 piece printable ammo box to store 308 rounds. I reload my own rounds and found these 3d printed versions to be just as sturdy as the store-bought versions, but way cheaper. The box holds 50 rounds. Use an 18-gauge brad nail…
3D printed tether bow hangers and hitch tenders. 2 different styles of tenders - standard and Distel - with two different inner diameters (0.5" and 1"). The tenders allow you to move the friction hitches on your tethers single handedly.…
EDIT 07/20/2025: Added a Chamfer to the holes in the block (Because chamfers are what separate us from the animals) Reloading Block for .223 Rem./5.56x45 NATO rounds. The Block holds 50 shell casings at 0.5" (12.7mm) deep. The holes are…
EDIT 07/20/2025: Added a Chamfer to the holes in the block (Because chamfers are what separate us from the animals) EDIT 07/18/2025: Modified the STL to add embossing on the side and changed debossed text on the top to include NATO…
This is the standard fan duct (Bottom Horns, as mentioned on the EVA site) with mounting holes for the Beacon Eddy Current Surface Scanner Rev H. Updated the height of the mounting platform to allow for the recommended 2.6 mm clearance…
EDIT 07/20/2025: Increased hole size and added a chamfer to allow better fit across different case manufacturers Reloading Block for 9mm Luger/Parabellum rounds. The Block holds 50 shell casings at 9mm deep. The holes are sized…
Update 04/13/2020 Added STLs for Fan Duct. There are 3 designs to choose from and I've included all 3. While building my own Hypercube, I chose parts I had on hand for the build and had to create/modify designs. I have listed them below:…
Update 01/20/25: Additional info on assembly and print settings. WARNING : This is a prototype and an overkill project. It takes about 2 full 1 Kg spools of filament to print, and with the cost of the hardware and fasteners, comes close…
This is the Fan Shroud mount for the LIS3DH accelerometer (used with Duet 2/RRF). I took the Fan Shroud design created by Michael Laws (TeachingTech) and changed the hole size/spacing to match the accelerometer. Print Settings: Material:…
This model contain cable management modifications to the 40mm fan inlet used on the EVA 3 extruder. There is a cable slot with a zip tie on the back of the fan mounting platform and additional zip tie slots on the left side of the…
This is a model for a case, frame mounting bracket, mounting arm, and case mounting bracket for the PanelDue 7i. The mounting arm is longer than usual so that the screen doesn't interfere with the moving bed on my modified CR-10S. The…
Lined up the hex nut holes parallel to the mounting plane. New Offsets X: -29, Y: -14
This is a mounting platform for my extruder/hot-end and ABL sensor on the SecKit SK-Tank. I'm using the orbiter v1.5 extruder with a Slice Engineering Copperhead hot end. I also decided to use a BL Touch instead of the inductive probe.…
The Kamado Joe Jr. top vent is the standard cast iron daisy wheel, with the vent holes open to the elements. The STLs in this model allow for casting a new control tower that is similar to the Kamado Joe Classic II. The model is split…
This is an enclosure for the Duet 2 Ethernet that I designed to mount to the bed frame of my modified CR-10S. The enclosure mounts to the frame using the corner mounting brackets. The enclosure lid is optional and comes with holes to…
These are all currently available results.
