Counting matching models…
The pedal faces don't require the spacers and the spacers don't require the pedal faces. You can use either independently. Pedal Faces: * Less slippy than original pedals when playing in socks * Can be used with the original m4x8mm…
A remix of Crosman 1377 suppressor V2. The original was a 5mm hole for 4.5mm (.177) pellet. This has a 7mm hole for 5.6mm (.22) pellet. I also made this a two piece threaded design. This makes managing supports simpler. Also, if you break…
TIE Interceptor. You will need a 300mmx300mm print bed to print the original size. I have provided the SVG file and GIMP project file in case you want to slice it up to whatever you want. Suggestions: Print on glass using concentric…
I needed a case that fit my PoE/NVME hat so I could use my Pi for a Ubiquiti Unifi Controller. There's a regular and wall mountable bottom plate. Use supports touching build plate for the bottom. Make your life easy and scale the parts to…
This fits the Playstation Portable Slim (3000 series). There are other models like this available online but the fit was too lose on one axis and too tight on another. I made this to have a secure fit. This has been designed with 3D…
The baskets that come with the ice makers break easily. This is thicker and more durable. I rebuilt it in Onshape so I could tweak the dimensions. Created in Onshape:…
I needed something to mount my R9 PSU under the foot pedals. I found other mounts, but none that fit my need, or where I could tweak the dimensions. I provide an Onshape link below with some variables you can change to adjust the size in…
Two models. One uses M5 hardware to mount to the playseat challenge, other uses M6. Both use M6 countersunk screws to attach the Moza R9 to the adapter. The M5 Model requires: * 4x M6x14mm countersunk screws. * 6x M5 standard screws (14mm…
I ordered a few Rock Pi 4b+ SBCs and the heatsinks: https://www.embeddedcomputers.ca/product/aluminum-heatsink-case-for-raspberry-pi-4/ But what I got were similar, but not the same, heatsinks. They're wider with 8 holes instead of 4.…
Use metal automotive grill mesh. The metal mesh is sandwiched between the makerbeams and the printed panels. Grill mesh can be cut with good scissors. These panels require 1 cut piece per side (even though a side may have two printed…
I made a Moza HGP shifter adapter for the Playseat Challenge Universal Mount. There is an angle adjuster so you can make it parallel to the floor. 1) Print as oriented in model 2) Use 4x bolts, nuts and washers around perimeter. This…
I wanted something stronger for my heavy BeamCase ATX PC. I could have used t-slot nuts, but like the original creator, I wanted to keep the necessary materials to a minimum. Requires 6 M3x16mm countersunk screws and 6 M3 nuts (both of…
This is used in conjunction with a 1/4 turn plastic screw to retain the intake baffle. This must be printed in a flexible filament. After turning the screw a quarter of a turn, it will bulge out the bottom part to lock it all in place. I…
The original metal L bracket mounts requires the whole front dash to come out. This mount moves the screw points above the dash so the head unit can be removed by only removing a single trim piece. I suggest printing with a 0.4mm nozzle…
A case I made for the Star Wars Despecialized Edition Trilogy. There's 2 files, the pictures are of the thin version. I have not tried printing the thick version. Tinkercad link: https://www.tinkercad.com/things/6V5Mb1iTtM2 Print Settings…
When life takes your doohickey, you clone a doohickey… to make super-doohickeys. Must be printed or painted green. If not, other Viper owners will point at you and laugh. And you know what? They're right to do so. From…
The Hertz CP 26 tweeters were the closest I could find to the stock tweeters. Here's an adapter. You will also need an M3 screw that's 12mm in length. Link to OnShape model:…
I needed a battery door for a WM-23 I was repairing. There are some other battery doors out there, but for whatever reason, I couldn't get them to fit for me. I created my own parametric model. The link is available below in case you need…
I made these to lift the rear by 70mm (2 3/4 inches). Just one held my weight of 81kg (179 lbs), but print 2 or 3. It's a long, but low-risk print. Add some foam tape or similar to the bottom if you're worried about scuffing floors. The…
Includes cutouts for wiring and a cutout within the lid so the timer cog can be adjusted with a small flathead. The lid has some protrusions to keep the jumpers from wiggling out. You will need 4x M3x35mm bolts and 4x M3 nuts. I printed…
Compatible with 120x25mm fans. This just hooks onto the rear fan. I printed mine in PLA without supports. Created in Onshape:…
This was the least-terrible idea I could come up with. Reasons why I decided on this location: 1) I didn't like the cigar lighter mounts because the GPS is too low. Also if you knocked it with your hand you would probably damage the cigar…
On my 93 antenna car, the giant antenna gets in the way of the car cover. I managed to find a Metra 44-STUB antenna that comes with the elusive female 1/4-20 to male 6mm adapter. After installing it, it looked funny. The base, adapter,…
Usually the Moza wheel bases must be mounted on the very front or back of the Playseat Trophy. If you mount it in the middle, there's only holes for 2 of the 4 bolts. This is just an angle adapter so you can mount 4 points. Hardware: - 4x…
Slight Remix to make it height Adjustable. I used it on my Adimlab Gantry with an E3D v6 hotend. Tinkercad link: https://www.tinkercad.com/things/7dTHienanYc Print Settings Resolution: 0.28 Category: 3D Printer Parts
I print a lot of PETG. I don't have an enclosure and a 5015 blower fan can easily cause parts to warp. The original fan caused parts to warp on the right side of my prints as the majority of the cool air blows there. I made a fan duct…
Based off of Garrett Waltrip's idea posted on the Adimlab Facebook group. You can use this to have a (relatively) quick disconnect of the e3d hotend and also mount the gold mk8 extruder that's a popular upgrade for these printers. I've…
A new front plate for the electronics box of the Adimlab Gantry. I added two 4010 fan mount points to the front. Uses the 4 stock mounting screws and nuts to mount the new front plate. There's also a 'slotted' version. It is originally…
Apparently this Pen must be stored vertically, so I made this holder for my daughter. I printed mine with a 0.4mm nozzle, 30% cubic infill, 2mm walls, and using wood pla. Created in Onshape:…
These are all currently available results.
