Counting matching models…
At the end of 2017, I found Mike-vom-Mars' hand gestures on Thingiverse (thing:2641409) and decided to use those as a starting point. Some FreeCAD editing was involved; I enlarged the hands so it would fit the 13cm+ body width of my…
My Parkside blower was left in the rain and stopped functioning. After opening it up, drying it out and applying power to it, it suddenly started again and, because of the force, fell out of my hands on the concrete floor… That caused…
Mind you: you are probably better of buying a decent new PSU, but if you're as stubborn as I am, read on.... I wanted to replace the noisy fan in my CTC PSU but didn't find a quiet 60mm 24V fan in a decent price range and with the same dB…
I designed my own version of an air assist nozzle for this laser engraver/cutter. The air pump that I’ve got was a bit of a trade off between power and noise. Therefore I designed the nozzle to minimise air leakage and get the most out of…
After switching to the iPad Pro 12.9" from the iPad Air 2, I couldn't find a suitable and affordable tablet holder for the larger size. I already had one for the smaller ipads and decided to adapt its design to a larger one. It's a geared…
I have been using desiccant containers when storing filament in a box. After purchasing vacuum bags I noticed that these containers, that are positioned in the center hole of the spool, are being closed off by the vacuum bag. That will…
I designed a Z height adjustment for the 10 Watt laser on my Comgrow Comgo Z1 which is more convenient than the original bracket with thumbscrews. Print Settings Printer: CTC Bizer Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm…
Reverse engineered quick release plate for Manfrotto 410 geared head and compatible heads
For installing a thick 4 x 6mm2 YMvK-AS ground cable I needed a right-angled M32x1.5 cable gland to feed the cable from the floor to the distribution box. One could buy one, but in my case delivery time was weeks and they're quite…
For a 3D printer table I wanted to use 2 Ikea Lack 50x50 tables. 2 times 45cm height would be a bit too much, so I shortened the legs of the bottom one of the two tables. In order to regain stability and for leveling the setup, I designed…
Photo is of Version 1 of the original design with two halves. Since my printer isn't capable of printing the full size screen case at once I designed it in two halves. Having that design it was actually simple to merge the two halves…
For installing a thick 4 x 6mm2 YMvK-AS ground cable I needed a right-angled M32x1.5 cable gland to feed the cable from the floor to an Eaton System 55 distribution box. One could buy one, but in my case delivery time was weeks and…
After printing the drill stopper sets of @cewo and seeing the included box design, I decided to make a different box using a living hinge and magnets to lock the lid. Since I used the same basic box sizes for both sets, this one has 2…
My Froggit weather station includes the Froggit DP80 rain gauge. It came with a 32mm, 200mm long, mounting pole and brackets to screw to the rain gauge. This design has a ball that fits around the pole and a joint type stand to screw to a…
Since Parkside or any other brand didn't offer an electric caulking gun for use with Parkside X20V batteries, I got myself a cheap electric caulking gun from Aliexpress which was setup to use Makita batteries. The assembly hat holds the…
This project started with the hinges I found on this platform. From there it progressed in completely closing my CTC with doors and a lid/top-cover. I planned on adding hinges to the lid as well, but decided to keep it separated from the…
After printing the drill stopper sets of @cewo and seeing the included box design, I decided to make a different box using a living hinge and magnets to lock the lid. I've printed this with some generic PETG on a Bambu Lab P1S using the…
Rugged laptop stand. Designed for MacBook Air M1. The “lip” that prevents the laptop from tipping back is 8.5mm, so it will fit any other laptop with a keyboard/bottom height within that range. I printed it in black PETG with supports,…
Update: there's a full size design for larger format printers available. See Remix. This is Version 2 of a 10.1 inch TFT enclosure / case. It is designed so it can be printed on a 220*140 print bed. The finished product photos are from…
I had an old iPhone 5 docking station lying around ever since I went for the iPhone 6, years ago. It became useless because the slot where you placed the iPhone 5 was to narrow to fit any of the later models that has a case in place. I…
Reverse engineered air inlet for Yamaha MIDI windcontroller models WX7, WX11 and WX5. This part is often missing in older instruments but very important to prevent moisture (condensation from exhailed air) reaching the breath sensor…
I have had this idea in my head for a while, where I could mount an Apple Homepod Mini right on an EU schuko wall socket (might work with other style sockets as well, depending on whether the PSU plug is the exact same size). That was…
After using the Spring based anti-vibartion feet for a while I wasn't too pleased with the result. To my opinion using the springs the machine is rather instable and shakes all the time especially when the head makes short movements. I…
A nice gift for everybody. All the parts need to be assembled. And you need a sock, so the money can be poured in.... There are three cross bars of which you need at least one. Cross bars come in blanks, but also with "Happy Birthday" and…
Case for set of 5 radius gauges that I bought on Amazon. The set consists of the following gauges: R0.3-1.5 R1-6.5 R7-14.5 R15-25 R25-50 R52-100 You'll find 2 separate files for the case, one for case itself and one for the text inlay…
After gathering some ideas around here, I designed my own spoolholder where the spool rests on 608ZZ bearings. Easy to load and very smooth in supplying filament to the extruder. Design is for spools with total width of around 70 mm. If…
Not so much a remix, rather some addition to make it work even better. On my print of the enclosure, the parts didn't snap together really well. Next to that it was just hanging about. I designed a mounting mechanism that clamps the…
The standard miter gauge that comes with the Metabo TS sliding table (628900000 ) works but is rather limited. There are plenty miter gauges available that do allow accessories like end stops and extensions. Unfortunately the T track used…
These are all currently available results.
