Counting matching models…
Modeled by me but based on the original idea here: https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/richardjm/picam-corner I modeled a new one from scratch in F360 because the Pi Camera V3 just fit far too loose for my…
ATTENTION EBAY/ETSY/ETC SELLERS. IF YOU ARE GOING TO SELL THIS MODEL FOR THOSE WHO CANNOT PRINT ONE THEMSELVES, GIVE PROPER ATRRIBUTION. IF YOU CONTINUE TO TRY AND PASS THIS OFF AS YOUR OWN I WILL PURSUE TAKEDOWNS . This is my take on a…
Remixed a lens protector and closed one end to create a lens cap to protect the lenses from dust and light when not in use. Printed in TPU to prevent scratching of the lens holders and also to create a friction fit. Your tolerances may…
Remix of https://www.thingiverse.com/thing:3844212 to add varying sizes and Arduino controlled lighting. Final Update: Finally finished painting on my print of the animated LED stand. Pictures have bee uploaded. Short video of it here:…
This is a display stand for the 2023 Tron Identity Disc found at Disney Parks by the Lightcycle Run coaster. LOVED the simplicity of the wall mount, but I have ZERO well placed available wall space in the room this will live so I wanted…
Edit 1/17/2024: These cables this mount was designed around have since been discontinued. It may be possible to locate a same sized replacement but I cannot guarantee anything nor can I upload any edits to accommodate the numerous…
Needed a panel mount connector to handle high DC current and had a TON of XT60H connectors. Saw other Thingiverse models that did this but they didn't work with XT60H since there is a slight difference in design due to the cap that covers…
Adjusted the sizing of both the magnet holes themselves and the overall dimensions to give s bit more plastic around the magnet holes so that when pressing in the magnets the edges don't visibly bulge. Photo shows the original (left) and…
Warning: This will be tedious as hell to make but I figured it was still worth sharing. If you find any improvements to the method and/or models by all means share it in a comment and/or remix. Soldering and wire stripping equipment will…
Use the top cover from here: https://www.thingiverse.com/thing:4580133 Remixed the original vat holder tray by soswow linked above slightly to allow for incorporating heat set brass inserts. This allows you to use the Saturns vat screws…
Excellent jig by motocoder, I just had issues with being able to accurately see marks to cut strips to proper length.
Printed with the top facing down on the bed. No supports needed. Mounting hardware is the same as a standard CW2 mount. Uses 0.8mm spring steel wire For the steel wire retention you will need a button head M2 self tapping screw. I used…
Print the same way as the original covers. Default has it joining a diagonal from the top left/lower right (when looking at the wall. Just mirror the model in your slicer to get the lower left/upper right.
This is a remix of a Lipo Holder for an HPI RS4 Sport (a vintage 1st Gen version). This has been modified to add a small pulley to slightly raise the belt off of the LiPo case. Otherwise they would lightly rub so this hopefully prevents…
Print with the top facing the plate. Uses an M2x10 Button head screw. I got mine here: https://us.store.bambulab.com/products/bt2-button-head-cap-self-tapping-screw-bhcs?id=42382277017736
Made a cover w/ fan compatible with the FilamATrix toolhead cutter mod.
Modeled from scratch in Fusion 360. I'd print with at least 4 perimeters and with the orientation as shown in the model view to ensure rigidity. The one pictured was printed in PLA. Doesnt show any signs of flexing or breaking. The…
Printed with the following settings: 3 perimeters 4 top and bottom layers .2 layer height .4 nozzle Yoyi Transparent Yellow PLA 10% Triangle Infill Seams aligned to rear. I oriented the model in SuperSlicer so that the seam was in the…
Remixed to change the text to match my Haribo Build. The LCD hole fits a 3.5" Adafruit PiTFT. 02/06/2019: Uploaded a fixed version of the Haribo Text. Realized the X button was too shallow so it may or may not have printed flush with the…
I could't find a suitable cover for my Game Boy Zero. Typical USB plugs either dont fit or are ugly. The standard EXT cover doesn't fit without some HAIRY work with an exacto knife. Even then you risk cracking the plastic or end up with a…
My PSU came with a printed grey port cover but I wanted one that better matched my translucent shell. I could not locate a model online so I remade it by measuring the existing grey piece and modeling it in Fusion. So, credit to Rexus…
I got frustrated trying to wall mount my pair of the wall mounts made by kendrome ( https://www.thingiverse.com/thing:1527199 ) evenly and straight so I took the holes on the wall brackets and created this simple jig to let me easily…
WARNING: This is at LEAST a 48 hour print,will require a large build surface (roughly 200mmx200mmx200mm) and will use up about 500g of filament. This is a tool organizer for the items I use with my printer. This is a bit specific to my…
I have a Haribo MK2.5S build and was also looking to swap my LCD for an OLED display. Modded the STLs in Fusion 360 to reduce and inset the LCD display hole since the OLED is thinner by about 5.5mm. Also edited the text to make it Haribo…
Did a slight resize of the clean air re-direct duct by zuspiel in to match up the mounting holes to those on filter sandwich made by JKSniper. http://www.thingiverse.com/thing:2105113 Print with the same settings zuspiel reccomended. To…
For those who don't want to use magnets to attach the wings, I made this insert that i equal to two magnets stacked. That way you can glue one side to the magnet holes in the body, and the other into the wing holes and have everything…
Same as my other remix for the plain cable covers, just with the added centipede feature from Fairaday
So I do not use my box like the original model. I only use 1 spool per printer, two printers, and the box is a bit high an hard to reach. Any time I loaded or unloaded a spool the original rollers would pop loose or slide around making it…
These are all currently available results.
