45 models
UPDATE: Added a “R2” version which allows the Wago's to be opened while mounted. It was the only complaint I've seen with this. I adjusted the rotation of the mounts, and slightly redesigned the overall holder. The centre Wago might be…
Just a simple DIN mount for the Panasonic SSR. Uses 2 M3x4mm heat sets for the mounting, and snaps nicely onto a DIN rail. May fit other SSR modules, I'm not sure. I designed this for my Micron+ build, and it works well for me.
I designed this for mains wiring up a 3D printer under the hood. The Voron SW uses 2 power supplys, and needs some wiring to be done. I could have used blades, and made a wire harness, but I wanted something I could easily take apart to…
Pretty straight forward, this is a set of basic covers for the Moza bases and wheels to protect against the contacts getting dusty or damaged when not in use. Technically anything that is using D1 QR's, so Simagic stuff, should be…
This is an 8mm tall spring preload spacer, designed for any traxxas vehicle with shocks that use preload spacers on the springs. These snap over the shock cylinder, to increase the preload. Very simple to scale to various thicknesses.…
This is a simple printable 2 part deck panel for the Voron Switchwire. I've added 3 additional mounting holes to better align the panels, and more rigidly mount them. The panel is split in 2 parts that just fit on the VSW build plate. I'm…
I have a Napoleon gas grill, which has been a great BBQ for me. The down side has been how fragile the knobs are. I had 3 of the 4 break in the first year, and used zip ties to hold the stem together, which worked for a couple of years…
EDIT: Initially this was just aimed at the Micron+, but I have added parts to make it more robust. There are now 2 varieties of 2020 mount (front face of rail, and bottom face of rail). There is a variant of the case that has a cutout for…
After 2 years of not touching my original design, and a long pitched battle against my children this past weekend, I decided it was time to finally update my original Stryfe foregrip. This is the MK2, which makes some changes to the…
It's a fore grip for the XShot Fury X. I have big hands, and other options either didn't work for me, or were too small, or blocked the safety. This one is longer, and sticks out a little from the front of the blaster. This would pair…
I finally broke down to tune my brake pedal for my Simsonn Pro Pedals. There are additional elastomers and springs in the kit, and I wanted to soften the initial press, with a nice progressive increase. Problem? The included springs are…
I created this after printing a couple of different designs from here and finding them either too small, uncomfortable, or poorly fitting. This is the initial version, and still being revised. UPDATE 1: First print had tolerance issues…
I'm finishing up a Voron Micron+ (Printers for Ants) build. The AB drive wiring is… not great. There are not any clean ways to route the wires for the AB drive motors LDO has provided in their parts kits. There are some nice 2x2 microfit…
I've been converting a long running project to a 2WD Slash for the last few months. Couldn't find the Rx box from any local sources, so I decided to design and print my own. It bolts down on the stock mount holes, and holds any Rx I can…
Recently I got into XShot Pro blasters. These take Talon style mags, which are not the cheapest. While looking for a good design, I found the Sure.T mag. Looks great, not a fan of printing it vertically though, especially on a bed…
https://github.com/necroware/gameport-adapter Necroware released this pretty great gameport joystick adapter PCB and software. It's the most comprehensive design I've seen, including some custom one offs I've build with direct wiring to a…
Just a really simple 6010 fan mount for 3060 extrusion. The Voron Switchwire calls for some double sided tape to mount a 6010 fan, and I figured I may as well just design a part that can be printed quickly and do the same job, while…
The stock paddle shifters are prone to breaking, and generally very unsatisfying. I haven't broken mine, but I can see why they break so often. I'm in the middle of a wheel upgrade, that is putting a larger round wheel on the C5. Since I…
This is my Y axis conversion for the Simax3D Iron M1 printer; I did this to compliment my X axis Linear rail conversion. You will need the following parts: 2 x MGN12H 300mm Linear Rails 10 x 2020 M3 drop in nuts or T nuts. 10 x M3x10 ~ 12…
I built an Unraid box in this case, which had been sitting around for a while. Turns out the HDD's get very hot in there. After searching, I found no real solution. I designed this adapter that replaces the rear HDD cage cover, and allows…
UPDATE: I've added the step files to the files section for this. It's not perfect, and I don't think I'll work on it any longer, but someone else is welcome to tweak and improve the design if they wish. The clamp design, specifically the…
Just a simple Tinyhawk II Freestyle battery tray. I designed it specifically to fit 2S packs, specifically the Tatu 450mAh 2S 95C packs, which are cheap, and perform well. This should stop batteries from being ejected forward during a…
I have a Moza R9 mounted a Next Level Racing Wheel Stand 2.0. For my use, I end up unplugging and moving it around a lot. I have been getting more and more concerned with the power connector at the base. My solution? Design a mount for…
This is really straight forward. Do you have a wheel stand, a cheap one, and the pedal plate doesn't have all the slots you need to mount your pro pedals? I came up with these drill guides. The clutch and gas pedals have the same foot…
I released a case for the Discipline 65 mechanical keyboard previously. Since I liked it so much, I needed a matching case for my Discipad, and here it is. It's a single piece, as opposed to split up. I printed mine in ABS, you can print…
Super simple replacement finger ring for the Pampered Chef steel mixing bowls. The original black plastic ones break over time, and the bowls are much less usable when that occurs. My set of mixing bowls is fairly old, but for reference…
This is the culmination of projects while I've been printing parts to build a Voron. I decided it was time to convert the X axis to a linear rail. I combined this with my shroud design which will hold any E3D V6 compatible hotend. The X…
I had designed a foot / wedge for the Discipline 65 some time ago, and that's worked well for me for a long time. That said, the board eventually sags a little over time in the centre. Not a problem really, but it's noticeable. I had…
I have a bunch of 6" recessed LED ceiling lights. I needed 2, but they came in boxes of 6. Fast forward to recently, and I found myself looking at them and wondering how I could adapt it to a standard electrical octagonal box in my…
I designed this E3D mount for the Simax3D IronM1. The stock hotend works fine, but it's not all metal, and it's really loud. My initial design, was simpler, and worked well; until I started printing ABS. The air flow from the heatsink…
I had previously released a model to mount a passive 4 port USB hub to the side of an Alpha Evo wheel base, which made wiring multiple USB devices up a breeze… That is right up until you start drawing too much power from your USB port,…
I designed these to get a more comfortable angle on the CP5 pedals from Cammus when mounted in a wheel stand. I found the angle far to shallow for use in a wheel stand. I have provided 3 total variants, though only 2 really. One is a 7…
This is hopefully my last variation on this design. Decided I wanted a hand rest, and happened to be mucking about with a Duke Nukem 3D maker coin. The result is this variation. You need to print the centre piece in either PETG or ABS.…
This is a simple foot / wedge to give the Discipline V2 65% keyboard a 5 degree tilt with just the bottom plate. It's provided as a single file, you will need to mirror to print both sides. It uses one of the bottom plate screws and you…
This is a work in progress. It is a part to provide some extra strength to this fairly fragile design, in addition to making the belts serviceable. It retains the socket head cap screw as the Y end stop. I designed this after my Y axis…
I have 3 daughters, and one shower in my house. That means space in the shower is at a premium. 3D printing to the rescue. This is a small collection of soap trays I designed for my own home shower. They are designed to clamp onto the 1"…
Work in progress. Print in PETG, slide over your 2020 to get some grip while you tap the M6 hole for a blind joint.
Normally when I'm doing USB hubs, I prefer the bigger powered kind, but for a wheel base, USB power isn't really important, and the bulk of average peripherals you might connect are low powered as well. Sabrent makes these neat little 4…
This is a simple Eachine VTX03 20x20 stack tray. It holds the VTX03 with a single zip small zip tie, with some room to access the button with a small standard screw driver, and a cutout to pass wires through. I made this after trying to…
I recently designed a bunch of parts for my friend with his Bangarang 3". Initially I was just going to re-use my old Bangarang parts, but instead ended up designing new parts, which are better than my previous ones. These all mount on…
A design based on my Armattan Mongoose Rx and VTx trays. Designed to hold a XM+ or similar Rx, and a VTx, or VTx antenna pigtail. Goes over the rear standoff's, and fits snuggly on the frame. Top plate clamps the whole assembly down.…
I've owned this set of Turnigy hex screwdrivers for well over a decade. They work fine for smaller projects, but when I'm using them on a bigger project, like building a printer, the handles really bother me. They're too small, and my…
These parts are designed to fit over the rear stand offs on the standard Bangarang 3" chassis; may fit the 4" and 5" models, but will not fit the XL 5" and 6" models. First part is a stand alone VTX pigtail mount with a channel for the…
Couldn't find one I liked, designed my own. Designed to hold an old style VTx (TS5823L, etc..) the same way as the SCX frames. Includes a small tray on the bottom to hold a Rx like the FrSky XM, XM+, RXSR, or similar in size (12mm or…
This is a modification of my Moza power brick mount, but for the Simagic Alpha Evo Pro. The original model is here, take a read through it's description, as it's basically the same thing, but for a different brick:…
These are all currently available results.
