Counting matching models…
I found it difficult to source the same 20x6x2 magnets that Prusa uses in the USA, so I remixed the side storage design to accept these 20x5x2 magnets (actual dimensions closer to 18.9 x 4.6 x 1.8 mm). Required hardware: 29x 20x5x2…
This is a vertical laptop stand designed to hold 6 laptops and help manage their charging cables. It was designed based on the dimensions of an HP ProBook 450 G10 (15.6") and the charging cord that comes with it. The stand in the photos…
This is a wooden replacement bird feeder (dice tower) for the Wingspan board game. The tower and lifts off of and lays inside the dice tray for storage. There are 2 versions, one without the logo (pictured) and one with a more detailed…
This is a remix of Light Switch Lock by Yllonnoce on Thingiverse. I've removed the “no” symbol and removed the plastic behind the symbol to simplify it as much as possible. This design prevents flipping a light switch off, which is useful…
This is an adapter for connecting a 4 inch flexible duct to an air conditioner window seal kit for smoke/fume exhaust. I use this for a soldering station along with Loc-Line hose and a 3D printed adapter to remove smoke and vent it out a…
Origin This a remix of Carson Miller's excellent organizer set for the Wingspan board game. In short, it holds all cards, dice, player cubes, round goals, eggs, & food from the original game and European, Oceania, and Asia expansions. It…
2 organizers for mason jar lids: Mason Jar Lid Organizer Regular: 4 slots for regular mason jar lids Mason Jar Lid Organizer Wide: 4 slots for wide mouth mason jar lids At 200 mm tall, these organizers are near the maximum height…
These inserts are designed to fit in standard laboratory freezer boxes and should fit most 0.2 mL PCR tubes and PCR tube strips. The upper rack stacks on top of the lower rack with a little extra clearance for any PCR tubes already on the…
A simple rack for holding HPLC vials. I've included 5x10 & 10x10 racks, and a 2x2 rack for testing vial fit. Fusion360 file and STEP file included for easier customization. In Fusion360 file, edit "NumSlotsWidth" & "NumSlotsLength"…
Elder Wand This wand is printed in 5 pieces and screwed together. There are 2 versions of the middle piece, one with runes inscribed on it and one blank for custom inscription/painting. I actually made this model in 2018, but just now got…
This is an adapter for connecting a 4 inch flexible duct to an AC Infinity CLOUDLINE LITE A6 6 inch inline fan . It serves the same function as this commercially available adapter . I coated the adapter with a resin clear coat to make it…
This angled stand improves ergonomics when loading PCR or cell culture plates in the laboratory. It also makes it much easier to see into the bottom of small wells while working which can help prevent costly mistakes. It serves the same…
This is a slightly modified version of the bottom reinforcement to have a tighter fit with thinner plastic. The original bottom reinforcement was too loose on the thinner plastic sheets I'm using:…
Update I made a newer version of this lamp with the 4 lithophane photo panels printed as a single ring component. It requires a larger print area but is much easier to assemble than the original version. Lithophane Lamp This is a…
qPCR Plate Loading Guide In most qPCR (RT-PCR) reaction runs, samples are run in triplicate to account for variation between wells. This plate loading guide is designed to sit on top of a PCR Plate as a visual aid to loading wells in…
250 mL Flask Holder This flask holder is meant to hold 250 mL flasks in place on an orbital shaker, assuming your shaker has screw holes to attach flask holders. I remixed this 250ml Conical Flask Holder , making the following changes to…
This is a remix of lewosh 's battery operated solder fume extractor. I made the following changes: Base : Closed the opening for the battery status indicator and removed built-in support structures (I prefer to use PrusaSlicer organic…
Remix of the enclosure designed by @mdzi to close of the side and bottom peripheral ports (except the USB ports) for a cleaner look when not using external IO devices. Huge thanks to @mdzi for providing STEP files which made remixing this…
This is an adapter for connecting 2.5 inch Loc-Line hose to a 4 inch flexible duct for smoke/fume exhaust. I use this for a soldering station to remove smoke and vent it out a window. It is designed to be held in place with cable ties.…
This tool is designed with the Nerikomi pottery technique in mind, as it allows you to slice thin, fairly uniform, sheets of clay from a block. It is loosely based on one-handed wire cutting tools like this one . How To Use Attach the…
This is a remix of the rewinding spoolholder mounts for the COREBOXX Premium. I found the original spoolholder mounts held the spoolholders fairly loosely, and spools would wobble when the printer was running. Inspired by MIRE_19115's…
Origin This a remix of Carson Miller's excellent organizer set for the Wingspan board game. In short, it holds all cards, dice, player cubes, round goals, eggs, & food from the original game and European, Oceania, and Asia expansions. It…
0.2 mL PCR Tube Rotor This is an alternate rotor designed for a benchtop mini-microcentrifuge. It can hold standard 0.2 mL PCR tubes and works well with individual tubes or 8-tube strips. For a mini-microcdentrifuge like the the one…
This is a cylinder/pin that holds the diverter up on a tub diverter spout to keep in it shower mode. It is pretty simple, so it can probably just be scaled as needed in the slicer to fit different tub spouts.
This is a simple holder to provide an easy way to keep an air conditioner window kit held in place when not in use (window closed). It is attached in the window frame with small command strips . This was designed to fit the SIKADEER…
I purchased this VeCarTech cargo cover for my 2022 Hyundai IONIQ 5 as it was less expensive than alternatives. But, the ends that hook in to the slots on the car are too thin/narrow so the cover sags when in place (see before picture).…
Coverslip Holder This is designed to hold 22 x 22 mm coverslips. It is used to submerge coverslips in polyelectrolyte coating solutions and rinse solutions while exposing both sides of each coverslip as much as possible. One coverslip…
This is a replacement cap for the X-Acto No 1 Precision Knife | Z-Series . We use these in the classroom sometimes and inevitably the caps are lost, making them a safety hazard. It is easiest to with the closed end of the cap on the print…
IMPORTANT: I have only tested this centrifuging at 100 x g. I DO NOT recommend centrifuging 3D printed components at high speeds. This insert is designed allow centrifuging of Corex No. 8441 glass round-bottom 15 mL tubes in an Eppendorf…
A simple case/storage box for a Pantone Color Bridge fan deck. The one I designed it for is a “Color Bridge Coated” fan deck that is also labeled “The Plus Series”. The parameters I used in their OpenSCAD file are as follows:…
I modified [this design by JarnoV] to use a standard 22 mm watch strap instead of a built printed watch strap. I also made the lid a little taller to accommodate a slightly thicker cooling fan and removed the cutout for the fan wire since…
This is a remix of 2ROBOTGUY's penny fidget spinner. The only change I made is that I added a 0.5mm top layer to each of the penny slots so that the pennies can be fully encased inside the spinner. Instructions: I sliced the spinner using…
TipNoFlip! This is a stabilizer for the Thermo Scientific ART Barrier Low-Retention Pipette Tips 10 µL Tip Box (Fisher Sci Cat# 21402482) . When loading a pipette tip from the front or back row of this tip box, the force from pressing…
These drink coasters are based on the 3 circles logo from the "3 Body Problem" Netflix series. It's multi-colored and can be printed all at once with an MMU/AMS, or printed in parts and assembled. I printed these in PLA, but would…
I remixed the 4 parts of tjdesign 's Verdant Insert set that have designed on them so that they can be easily printed with a multimaterial system. I've included the 3mf files for each part separately, and one with all 4 parts together.…
Cheapo Fume Hood / Ventilated Box NOTE: This is NOT a real fume hood and only provides minimal ventilation. It should NOT be used with anything hazardous to your health. I wanted a cheap ventilation system so I could stain and seal some…
Vortexer Dial Knob This is a replacement knob for the setting dial on an older Vortex Genie 2. It fits onto a metal pin with a little wiggle room, but it holds in place well if you place a small piece of parafilm on the pin before putting…
Perfusion Chamber Platform This is a platform/stage adapter designed for Grace Bio-Labs CoverWell Perfusion Chamber #622105 . The platform supports the chamber when used with a coverslip instead of a glass slide, which is necessary for…
This is a simple collar designed for a PERMINKS 1 Gallon Pump Dispenser to restrict how far it can be pushed down, and therefore how much it can dispense at a time. We are using these pumps with 1 gallon bottles of tempura paint in a…
This is designed for use with Felix Instruments produce quality meters. It is used to mark an outline on a fruit prior to scanning. This can be useful if you want to scan the same area multiple times or sample fruit from the scanned…
A small magnetic holder for attaching Infinitokens to a magnetic surface. These were designed for moving tokens around on a map attached to a magnetic whiteboard. There is small ridge on the inside edge so the infinitoken gently clicks…
These are all currently available results.
