Counting matching models…
These keycaps are generated with extremely tight tolerances in mind print with 0.25mm nozzle. Keys are blank, but any kind of legend can be added with ease in Prusa Slicer. Keycap Playground scripts can be found here .
Strongly recommended to print in PETG
This model features a somewhat optimal storage option for your paint dropper bottles. It should fit Vallejo, AK Interactive or any 24-25mm dropper bottles. The single multiboard unit allows you to arrange them in any configuration you'd…
It's designed for the 2021-2023 model years. 100% infill in PETG looks adequately strong. PC and ABS/ASA would be even better. PLA may be viable, but try 50-70% infill so you keep some flex.
Supports shouldn't be required, but they won't hurt on the under side
Simple bracket allowing you to mound the G6 under your desk or on a wall with sticky tape
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.33x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.6mm…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is 200x97.96mm in size You may print at higher layer heights below the Min Depth of 0.52mm The Max Depth is 2.3mm and the Actual Depth is 2.3mm…
The original model had a ridge midway thru that really got on my nerves. I fixed it :)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is 200x108.79mm in size You may print at higher layer heights below the Min Depth of 0.52mm The Max Depth is 2.3mm and the Actual Depth is 2.3mm…
This mounting clamp is intended to provide a way to attach a quadlock mount centrally on my Woodcraft clipon adapter plate. The Woodcraft plate features some really neat ribs and holes between them. The clamp fits in the central hole,…
They are entirely modeled in Prusa Slicer, so I don't expect the hole punches to work in other slicers. Printed mine in PLA with 0.2mm layer height and they work great.
The cutouts would require supports. Tree(organic) supports work great.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 97.35x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm…
Project: kakashi_comic.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.67x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the…
My friend needed a support for his new GPU and the GPU Jack fit the bill perfectly. However, the heatsink cover of his GPU doesn't have a wide flat spot to contact the original GPU Jack. I reduced the contact point of the GPU Jack so it…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 113.68x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is 200x112.5mm in size You may print at higher layer heights below the Min Depth of 0.52mm The Max Depth is 2.3mm and the Actual Depth is 2.3mm…
It's designed for AK Interactive's bottles, but I imagine it would fit other brands. It slides on to multipoint rails like this one: https://than.gs/m/1123315
Do you own some or all(12) of AK Interactive's Inks range? This is the perfect shelf solution for you. It's made to accommodate 12 bottles which is currently the full set. It features countersunk holes for screws and holes for screwdriver…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is 92.27x200mm in size You may print at higher layer heights below the Min Depth of 0.52mm The Max Depth is 2.3mm and the Actual Depth is 2.4mm…
Small shelf designed to hold the TD-1 device by AJAX-3D
I recommend PETG or ABS/ASA. PLA could theoretically work, but I didn't have the balls to try it. It may or may not fit other TCL models.
My cat loves to slam doors closed around the house, so I modified this ingenious door stopper... to stop a door from fully closing and trapping my stupid cat in a room. Requires 2 6x2mm magnets, that should be glued into the holes in…
You will need 2 pairs of M3 bolt and threaded insert. I believe you can actually get away with a single bolt, but 2 is rock solid. Mine is printed in PETG and isn't going anywhere. I believe PLA should do the job as well. Multimaterial…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 142.83x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is 200x112.09mm in size You may print at higher layer heights below the Min Depth of 0.52mm The Max Depth is 2.3mm and the Actual Depth is 2.3mm…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 139.66x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm…
I wanted to upgrade my new Gilles Tooling levers with custom color adjustment wheels. Kudos to Ralf from Gilles, who shared that the original ones are made from POM, so we can choose an adequate replacement. I would suggest PC or PETG if…
This is my simple, pocket-friendly take on the classic magnetic fidget slider . It provides a highly satisfying tactile and audible click-clack feeling, perfect for focus or stress relief. It prints in two parts and requires standard…
A Pocket-Sized Rocket of Fidget Fun! The Scroll Rocket is a sleek 3D-printable fidget toy featuring two distinct scrolling experiences: a classic, smooth mouse-like scroll wheel and a unique, flickable tri-dorito-wheel for snappy,…
These are all currently available results.
