Counting matching models…
Shorter cable raceways (70x12, 90x12, 90x20) are screwable to DIN cleats with self tapping screws (2.0x10 or similar). Longer 130x20 rail was screwed directly on rear panel Mounting of rPi and SKR Pico was done with DIN cleats (by VORON…
Simple physical end stops for linear rails. They were used to mount and end MGN12 rails on 2020 and 4020 profiles for the Ender 3V2 modification. M3 screws were used. Examples on photo were printed from PET-G.
Simple stand / holder for solder wire spools, designed to accept wide variety of spools from approximately 100 g to 500 g. The solder wire spools rotate very smoothly thanks to ball bearings. List of additional parts: 1 pcs long M6 bolt…
Modification of original model to be compatibile with Sherpa mini. Modified Mini Stealthburner (by SpaWn): https://www.printables.com/model/593606-voron-mini-sb-sherpa-mini Printed from black ABS, supports recommended. My other…
NOT TESTED YET/ loaded in use - belt fits Pulley with HTD profile for 5M 20mm belt, separated in two parts for easy printing. Model was printed from black ABS, little bit sanded, glued and bolted together by M4 x 35 BHC screws, 4.3 x 20 x…
Some parametrs can be changed relatively freely, others don't work well in some combinations… Wheel have slightly curved sides - can be changed Main parameters: D_1 = main diametr d_1 = shaft diametr h_1 = wheel width no = number of…
Two-piece model, four part for mounting one Al profile. Desined for M3 tapered screws, works with flat head screws with head diameter less than 6,3 mm. Printig orientation Endcap : Lay it flat. Left/right mounting piece : Best is to set…
Box dimensions: 100x50x28.5 mm, wall thickness 1.8 mm. An M2.5 x 20 mm screw was used for the hinges. It is possible to use a piece of filament and melt both ends. The standard version has an interior divided into 4 sections. PLA is…
Trickle charging 9V NiMH for longer times is not recommended. In my example, I have an input USB-C → switch → boost module → resistor → led → battery slot. Voltage and resistance is set for optimal (lower) current during charging and very…
These are all currently available results.
