Counting matching models…
So i wanted to make various ways to mount Dewalt Battery Chargers (DCB112/DCB115 and the DCB118) The DCB112 and DCB115 screws are 114.3mm apart, and the DCB118 is 133.4mm First option, is a simple 2mm thick alignment jig. you can print…
There is plenty of ESP32 board enclosures out there, but most of them are quite streamlined/minimalistic, which is fine but I set out to buid an enclosure with a little more room in it so you can easily use breadboard jumpers instead of…
Paddle shifter extensions for B9 Audi's. i only know for sure what it fits on the A4/5 and S4/5, i think it works on the A3/S3 as well. i know it does not work on the RS5 as those are slightly taller. these hook over the top and snap in…
I've seen quite a few ESP32 boxes out there, and even some that can accommodate a speaker for running WLED SR (Sound Reactive), but i wanted a box with a little bit more room. I made this container/enclosure for those that want a little…
I was making an avionics bay and went off on a tangent with my calipers and made a lot more detail than i needed to. The Perimeter of the PCB is exact along with the 4 securing holes which i pulled from MissileWorks directly. Everything…
Just a blank license plate cover, use it to get rid of the dealer info on yours, or to add your own raised text/graphics
I Wasn't finding a multiboard mount that could fit my “Jermee Isopropyl Alcohol (IPA) 99.9% Purity” that i buy on amazon and swap the cap for a spray nozzle. It rings in at approximately 88/89mm diameter so i figured i would make one. The…
Hang your tools on your slatwall with this double hook
I made a little case for my XY-3606 DC Converter, the bottom is 2mm thick but in 3 places where solder joints are the largest, i have an extra 1mm of clearance to allow the board to sit flat in the box. You can secure with M3 screws…
Spacer to replace your existing z-axis stopper. Shown in the images above is the stock spacer with a 2mm spacer that i initially used. I then made the component itself a single piece with that extension. The versions with 1 and without…
Display your Benchy's on your multiboard with this peg mount. Has a small notch so it can hold on to the benchy so they don't slide off accidentally if bumped etc.
Decided to mount my garage door openers on the wall next to my door openers in my garage to easily find/give to someone when needed
One of my least favorite things on my B9 Audi, is the lack of storage. Basically all i have is a 2.5" deep center console under the arm rest which is completely open. I decided to try and make organizing it a little easier. This is an…
Fit your larger Inland/esun/yousu bottles in the Anycubic M3 lines autofill cap. took me quite a few versions of printing and testing to dial things in how i wanted them but it works great!
Utility Hook for Slatwalls, can be used for umbrellas, hanging pictures etc.
I decided to build out the DigOcta Power7 and Brainboards to start planning out a new enclosure i'm building for next christmas. I purchased some Power5 boards and plan on using those instead of the 7's so as soon as i get those…
a simple compact case for Max4466 breakout board/microphone. I'm using mine attached to a project box for a WLED Sound Reactive setup. The enclosure has 2 small pins to line up the circuit board and hold it in place, on the bottom is a…
2 versions, one made for the Anycubic/Elegoo sized bottles, and one that will work with Siraya Tech, Inland (metal), esun, yousu etc. This larger version has a little adapter that you can set in place for the anycubic if you want to print…
This is a heavy duty slatwall hanger. Resin and Filament can be weak and break easier than you wished it would. So i decided to make a heavy duty hanger so you can comfortably hang heavier items up with your printed hooks. Overall it…
The small “No Soliciting” sign in our front entrance gets missed as my wife wants it be be discrete so i figured i could make a nice looking yard sign and i'm quite pleased with the results. 2 versions/profiles available.…
I picked up this Newgoal Zigbee Tuya Smart 4 Channel Relay on amazon (https://www.amazon.com/dp/B0B978T5FT) I wanted to make an enclosure for it, a simple rectangle would've worked just fine but i wanted to make sure the buttons were…
Self Explanatory, But I've made ¼" Launch lugs for my rockets. Ive started launching rockets more and more with ¼" rods, less whip/flexing when the bigger rockets take off. So i made these lugs to fit various size standard body tubes…
I wanted to print a cake topper for a horse themed birthday party but was unable to find one so i decided to make it. I have a version with “Happy Birthday” text and nothing else like in images shown, i also have a “BLANK” version which…
Edit 10-30-2023 - Version with ears, only with 1mm centering holes so you can thread your own screws into this from the top. Edit 10-27-2023 - Added a 2nd model with Ears for more mounting options. Just a simple design to clean up my…
Im building out some ½" PVC to outline my windows with holidaycoro window strips and had an idea for minimizing the year round attachments on my windows. This Model started as my wanting to be able to make hanging these window outlines up…
I wanted to make a vertical rocket stand for my larger sized model rockets, Since i had just built numerous horizontal rocket holders for assembly using ½" PVC, i figured i would use the same for this stand. Start off by choosing how many…
I decided to make a “quick” model of a Dig Quad v3 board and got carried away. Anyway you could import this STL into modeling programs if you are wanting to design your own enclosure/standoffs etc. I got the most critical dimensions…
I was trying to get a sunglasses clip for a 2019 Jeep JL Wrangler without much success. The Jeep visor is a harder plastic, and the edge of it has a bevel/chamfer making all of the 3d printed sunglasses visor clips not able to stick to…
Wanted to make a substantial model to prevent it from starting to sag etc over time. You can experiment with hollowing it out to various degrees but i printed 100% infill so that it will hopefully last a long time.
I have some nice wall mounted plates i printed off for me orbital sanding pads, but they hang flat to the wall and waste a lot of space. I wanted to make a shelf so i could stack them. I printed a single test job to make sure fitment was…
I just got my JB4 piggyback Group 7 for my B9 S5 Audi yesterday and wanted to figure out a better way to mount it to my car. I first came across the idea for a way to mount the JB4 and the bluetooth adapter for it which is what you see in…
have some nice wall mounted plates i printed off for me orbital sanding pads, but they hang flat to the wall and waste a lot of space. I wanted to make a shelf so i could stack them. I printed a single test job to make sure fitment was…
Designed this rocket in Fusion360. Has all the main components. Fin Can - There are 2 versions, my original that i have in the pictures above and then a lighter version, i thinned a couple of the walls and added a pair of launch lugs to…
Picked up this bird feeder on Amazon ( https://www.amazon.com/Wireless-Outdoor-Watching-Capture-Identify/dp/B0C8C7S5TP ) It came with a couple clamps to mount the bird feeder to a pole, but the solar panel mount is 3 screws for a…
This is a single model, print 2 of them. Slides over each end of the Transmitter, small cutouts to go around the feet, and thick enough so the feet are flush with the bottom side for flat mounting. The front or back has a small lip to…
I know there are so very many “dog training” collars out there, I purchased this Jugbow one and my dog is very responsive to just the audio ( https://www.amazon.com/dp/B0CFX9F59C ) . I've never used vibration and the rubber caps are on…
I wanted to make a case to hopefully help protect my RRC3 LCD module from getting damaged/banged around as much. It has 2 pieces, a base and a top. The 2 pieces snap together as tolerances are pretty tight (perimeter is .5mm larger on all…
My first attempt at a printables contest. I may be barking up the wrong tree with this one, being a resin printer and all but i thought it was a pretty fun idea and i like how it turned out. The base has spaces for up to 3 magnets, 6mm x…
So i wanted to start using my RunCam2 4K camera on some smaller rockets. This cam, although small, is rather bulky to mount on the side of a rocket so I set off to make one that could mount internally. I've made 2 versions of this for…
I liked this design, but needed it to mount on my pegboard. Side 2 is orientated just like the original creators
Note: Do Not use the rotate function, only use the “Lay on Face” button to flip these over to edit text, and then back downward for printing. Otherwise the Bambu Studio gets all messed up with editing text. I'm not sure why or how to use…
I was pulling out our pitching machines last minute and discovered that the support block was missing on one of my machines and another was in bad shape. This Support block is the part attached to the pull handle that when you spring load…
These are all currently available results.
