Counting matching models…
9-4-22 Added the seperate files for each individual piece. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 38 Filament: PolyMaker PETG Category: Props
I printed the wonderful RC boat provided by Mr. Chew that his friend had designed, but I was having an issue with the Cover for the main body flying off due to the speed, I decided it would be nice to have a lid that is a bit stronger,…
I designed this for my Henry H001 22LR Rifle. The M-Lock slots are not usable due to the thickness of the plastic on the inside of the slots, It is possible to redesign this to make them functional at the cost of strength. This attaches…
This is a slightly resized of the Sundial included in Jlaak's Jack sparrow compass model The Original does not span the entire distance of the hole in the bottom half of the compass which makes it difficult to mount while still leaving…
This is my attempt at designing an adapter to install an early Dodge, Jeep, Chrysler, 4.7L V8 Throttle body onto the 08+ Intake manifold which is known to add ~20Horsepower over the pre-2008 Manifold. Since the earlier models used Drive…
MTS-123-MZ https://smile.amazon.com/Twidec-Momentary-Miniature-Waterproof-MTS-123-MZ/dp/B07VHCB1Q4/ref=sr_1_3?crid=3UAGCPQQF5HEH&keywords=mini+toggle+switch+momentary&qid=1658423797&sprefix=mini+toggle+switch+momentary%2Caps%2C80&sr=8-3
This is a prototype of a 3D printed Feed roller for Lincoln welders. Ideally this would be printed out of ABS, Nylon or Petg and would be used to feed aluminum wire through a PTFE lined gun. Category: 3D Printing
A hunk of plastic to put between the body of the carb, and the intake manifold to prevent heat soak, and help reduce fuel boiling & Vapor locking. This is just a representation of an actual phenolic resin spacer. I would reccommend using…
Main Body Gasket (Throttle Body Gasket in OEM Diagram) for the Rochester Monojet carburetor. There are other versions of this Gasket for different versions of the MonoJet Carb Family, but this one matched the chinese knockoff carb I…
I scaled up the original design and slightly remixed the center cone to be solid without the hole or log to use this as a passive radiator in a 3D printed boombox. I have no idea what i'm doing so the weight is probably off but if it…
I remixed this slightly for my 2006 dodge Dakota. I had to shorten the body to make room for my factory dome light. It's mounted onto the headliner with stainless M4 machine screws. I also resized the switch holes for 20mm round rocker…
this is a design I came up with in a hurry for a neat looking 12V landscaping light. it was designed around a standard/typical Shot Glass. For the dimensions, i used this as an example: https://www.thingiverse.com/thing:460 Real Shot…
I took the ChaosCoreTech Model and split the handle up into the seperate pieces, but I kept the proportions the same. this take the 3 piece handle and converts it into 14 seperate pieces, -3 Top core sections -1 Bottom Core Section -9…
These are all currently available results.
