Counting matching models…
3/15/2024 - Update: Corrected spacer. Not sure what I did, but looked like it was cut in half! Added the original 21mm length piece, and also added a 27mm long spacer as an option for the mag release 4/16/2023 - Update: Added redesigned…
Simple spacer designed to fit in the Nexus Pro X and provide an extra 50mm of spring compression. NOTE: I don't recommend using this with the stock spring, which has very low frequency and will be more subject to settling. I recommend…
Meet the Low Hardware Talon Claw U but Longer, a remix of Sillybutts' original Low Hardware Talon Claw U. My primary objectives while remixing the files were: 1 - Increase the draw length and volume of the blaster to approximately the…
Version 1 of my Angled Talon magazine adapter for the Topsolid/Xing Shen Fire Phoenix. Load darts backward from the normal direction, then load it angled forward. I used a leftover catch spring - not a strong replacement catch spring, a…
This project is still being actively developed, there are some pieces I'm still working on. Spacer/Thumbhole stock and adapter for K18 and K24 are in progress, just need to finish up when work allows. Anyway, Devendra is a remix of…
Prints the same way as the original back facing up with touching build plate supports. I'm sure with a little bit of time, the original creator will get the sizing straightened up and make this superfluous.
[05/26/2023] Corrected the model to be the correct piece. Apologies on the error. Also, added one version of the Collet Nut from Silly. He's got a bunch of other versions, textures and lengths on his github, so check there if you wanted…
Additional Upgrades to LHTCUBL targeting more airflow, compatibility with standard 5/8" or 16mm barrels with some additional quality of life improvements. With these upgrades and a spring approximately K14-weight, my version of the…
Instead of printing 2 pins, the two pins are connected by a bar, so you have something to get your fingers on to remove the pins easily for adjusting.
A small spring spacer adapter for the Adventure Force Pyroraptor's catch/spring seat. Allows the use the K31 spring that's common in low-power builds in Caliburns, etc. Or similarly-dimensioned alternatives. Just friction-fits into the…
Two disclaimers. 1 - This blaster was designed around a 400x400 print bed. I still need to work on shorter bars that can fit on a more normal print bed. 2 - Files are provided as-is. It's pretty easy to put together, but I don't have an…
Replaces the original Breech design with one designed for 9/16 * 0.028 Brass. The stock pusher and O-Ring create a great seal on brass. Just slide the brass back until it's for enough for the pusher to make a seal (see photos).…
Remixed customized 3d parts for the MESA blaster available from Shan Engineering on Etsy. Get the base files and instructions from there! I printed at 2.0mm walls and 25% infil, but you could probably use less. I'm still tweaking files,…
Original piston design is sized very specifically for the spring that comes with the hardware kit. It can be hard to find alternative springs that work if you're making your own kit, or modding for more performance. Narrowed the seat to…
For Besbro A901 blaster! 12/24/21 UPDATE: ADDED Spacer/Insert for plunger side of spring. Should prevent open-ended springs (K27 etc.) from squeezing past the stock resting spot and gumming up the blaster. Experimental. Modified retainer…
These are all currently available results.
