Counting matching models…
Allows you to strap in a can of spray paint and attach to a reciprocating saw blade and install in a reciprocating saw such as a "Sawzall". You will need a hook and loop strap as well as #10 or 4mm bolts and a spare blade. Print Settings…
This is a replacement interior panel for the Ghostbusters Haslab Proton Pack. This panel includes a cut out for a Talentcell 3000mah Battery Pack: https://amzn.to/3HDwbBf Uses a USB cable mod from GBFans.com:…
This is a remix of DysonOBI from TeachingTech. It allows a Ridgid Battery Adapter from Amazon to be affixed to the Dyson V7 or V8 vacuum. It may fit others. You will need the following: -Ridgid AEG 18V Hyper li-ion Battery DIY Dock…
These are pre-generated files for @ Cunfusu 's Parametric Gridfinity baseplate. It will help save time so that you don't need to generate your own! They are the standard 42mm grids as outlined in the Gridfinity standard by Zack Freedman.
This is a remix of the Spray Paint Rack by FlyBy Tom. I recreated the part because I needed it to be wider and the holes for the screw heads were not large enough. I ended up making it a bit of a different shape. It also only accepts 1" x…
UPDATED SEPT 2024: Now with a Gridfinity 4x4 tray option! Compatible with all versions of the 3/8 in. Drive SAE / Metric Long Reach Ball Head Hex Socket Set, or non-ball versions sold by Harbor Freight. PITTSBURGH BRAND Sku #67885 (SAE,…
An easy to assemble DC-DC charger that uses your RIDGID or AEG battery as the power source. Using the DC-DC converter, you can set your voltage between 1.5v-18v and set a current limit of up to 12A. Perfect for charging or boosting dead…
Do you have a lowly 2WD Tundra or Sequoia and want a place to put your cell phone? Look no further. This print will allow you to rip out your boring coin holder and replace it with you desired cell phone mount in a very good location.…
This is an additional print for the RIDGID Tools Double 18V Battery Holder with Slant by JA Prints and Crafts . This is spaced for US sized standard pegboards that use a 1" x 1" spacing and ¼" diameter holes. Care should be taken to…
This is a 3D printable case for the ZK-12KX Step-Down Converter. It is to be used instead of the acrylic that is supplied with the board. The Step-Down converter is typically used for DC-DC battery charging and it supports both constant…
NOTE: This can be a dangerous item to assemble. You must be familiar with using Li-ion batteries safely as well as how to solder. Proceed at your own risk! Want to build your own small smoke machine for your HasLab Ghostbusters Ghost Trap…
This is a mount that you can put on a Rustoleoum inverted marking spray paint can and actuate it with a standard sized servo. The force required is not great, so even a very inexpensive servo can be used. Perfect for attaching to your RC…
This is a mount for the SunFounder 7 Inch Raspberry Pi Touchscreen for 3030 aluminum extrusion. Used here on my Ratrig 3D Printer. It can be mounted in 4 different orientations for easy positioning and then full tilt. You will need two…
EKLIND 53168 Red Handle (Standard) 7 piece set with 6 inch length 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 1/4" EKLIND 55166 Blue Handle (Metric) 6 piece set with 6 inch length 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm
This is a Heltec V4 case with an integrated 18650 holder. You can add battery spring clips to hold it securely.
If you have the Banks Pneumatic Nailer / Stapler from Harbor Freight tools, you may find it comes with base plates that only allow for flooring thicknesses of 3/4", 5/8" and 1/2". What about 3/8"!? If you have a thinner engineered wood…
This is a dashcam mount for a Blackvue DR750S and a Subaru with Eyesight & the headlight high beam assist sensor. This print fits nicely around the headlight sensor and can be affixed with some double sided tape. It was designed to work…
This is a basic tray that will give you a nice spot to hold your iFixit Essentials kit. I even threw in the iFixit logo. The tray uses ½ sized Gridfinity spacing, so you can use it at a 21mm or 42mm spacing. It takes up 4 x 4 standard…
This is a 3D-printed case for adding a 12V USB accessory outlet to a Ridgid or AEG 18V battery adapter. It lets you mount a standard panel-mount USB socket on your battery so you can power or charge devices using your tool batteries. Use…
Want to get started with surveying but don't want to break the bank? This reasonably priced kit can be built for around $400 and will give you accuracy to a few millimeters when assisted with RTK or NTRIP correction data. Build two and…
The Toyota Tundra and Sequoia leave a gaping hole under the windshield wiper cowl that is a perfect way for mice and other rodents to scurry their way into the interior of your vehicle. Print one of these covers along with the clips and…
Want to add a Reese Brakeman Brake Controller to your Toyota Tundra or Toyota Sequoia without drilling any holes? This mount just slips the brake controller on to the lower knee bolster of the dashboard and can slid off when not in use!…
This bracket will just give your shelves some stability if you put more than one shelving unit next to one another. There are two versions that would allow the joining of 2 shelves or a version that supports 4 shelves standing back to…
These are all currently available results.
