Counting matching models…
This is the original Z axis cover for the Bambu Lab X1C ! :) These Z axis covers protect the top F625Z bearings on the threaded Z axis rods in the Bambu X1 and X1 Carbon… The walls are pretty thin… so, you may need to enable “Detect thin…
This business card plate holds metal business cards in place for the Xtool F1 laser… Works with all metal business cards including the very thick 2mm+. (Most cards are 0.25 / 0.45 / 0.8mm). So, I got you covered! Note: > You can print…
This plate / jig holds an 8oz flask for the XTool F1 laser... (About ~ 237ml) Note: > You can print this plate in any filament you want. (However, a “tough” filament is recommended) > 15% infill , 3 walls, honeycomb pattern… ** PLEASE: **…
This is an upgraded model of the feet on the Bambu Lab X1 / X1C / P1P. You can print and replace them or upgrade them when you want to. It also gives some extra clearance for anti-vibration.(V2 / Squash feet models.) These may also work…
This plate accommodates a 4" or about ~101mm round coaster (wood, metal or Cork) for the XTool F1 laser. (see note about size…) Note: > You can print this plate in any filament you want. (However, a “tough” filament is recommended) > 15%…
These can be either a replacement or enhancement to the “L-shaped positioning piece” included with the XTool F1 laser. These L-pieces have a different hole location than the OEM L-shaped piece. To help out with “odd” things… *You only…
Inspired after my little cherry tree... I designed this "cherry bunch." This Cherry Bunch is a “proof of concept” ... for a course I am teaching... Please, do not modify or resell or distribute my model on any other 3D model website. *…
This is the "back side" … In other words you can engrave the back side of the 8oz flask with this plate / jig… ( 8oz / ~ 237ml ). For use with the XTool F1 … Note: > You can print this plate in any filament you want. (However, a “tough”…
This TPU plate will protect the buttons on the X1 / X1C from accidental activation or heavy impact… I've pressed the buttons a few too many times with my arm or hand without looking... So, I find it very useful… specially, while printing……
This is a dust cover for the XTool F1 that also works as a button bumper… Overall it minimizes dust from getting inside the electronics and possibly damaging the lenses. It also protects the buttons from possible damage . All this while…
This is a scraper that uses replaceable dual sided plastic blades readily available on Amazon (search for: “Sticker Remover Plastic Blade 100 PCS”). The blades come in a pack of 100 for about $6-9. Which in the long run is a much better…
This is a Watch band Plate / jig for the XTool F1 laser... Note: > You can print this plate in any filament you want. (However, a “tough” filament is recommended) > 15% infill , 3 walls, honeycomb pattern > Remember to Print the 2 plates……
This clip can be used to hold down items that are 3-5mm thick in the work area of the XTool F1. It uses the AL thumbscrews included with the laser or you can buy new screws to use these clips… Note: > You can print this clip in any…
This plate / jig holds both leather patches, 2 x 3 (rectangle) and 3 inch (round) for the XTool F1 laser... Note: > You can print this plate in any filament you want. (However, a “tough” filament is recommended) > 15% infill , 3 walls,…
This window vent plate is made for the XTool F1. using all 3 parts fits a ~30.3 inch or 77cm (770mm) window (you can print as many plates as you want to fit your window…) Note: -Print in UV resistant filament such as ASA or ABS. - 5%…
This is a quick ghost you can print for your entrance hall as an ornament or as a gift filled with candy for family members, friends or coworkers… (prints in ~ 1.5 hours or less, my fastest time is 38 minutes)
This bracelet bending tool can bend up to ~2mm (14 gauge) aluminum, copper bracelet blanks and other metals… Print and add to your Cricut / laser arsenal of tools, or fix your own bracelet… Note: > Print in a tough filament such as: ABS,…
These are the “generic” versions of the custom door number signs I made for a doctor's office … These are: ~ 9 x 9 x 0.79 inch * Like it?… or are planning on using these in your professional office / SOHO / Workshop or rental property,…
This is an ergonomic more “user friendly” door handle for the Bambu Lab X1 and X1 Carbon. UPDATE: New V2 version of the door handle now available! - Doesn't require supports to print. -Now more ergonomic than before. -Can be installed…
This rack / stand can hold the iFi Zen DAC and the iFi Zen CAN and 1 more item. It has enough space for cooling and it is open for connections in the front and back. It can also be used for any audio device that measures: 2" x 7" x 4.5"…
This U bracket is used to attach the 2020 T-slot bar to a wood top (desk) As part of a new desk setup. The side and middle screw holes are 5mm wide… You can use the bracket for many other projects… Note: Print in your fav. filament , 5…
This flashlight holder can hold any <46mm / 1.81" (diameter) flashlight such as the Duracell 550 / 600+ , The Coast G50, Dorcy Pro / Ultra, Eagle , Pelican tactical, Maglite, etc… Note: >You can print it in any filament you want. > Use…
This is a cover for Medeco security keys, It allows you to quickly identify the correct key. It has a slot for the serial #s to be displayed clearly. UPDATE: Version 2, now available: This new version is rugged and has been tested to…
This is an under desk cable management / surge protector holder... It is BIG and Heavy Duty. Note: > It needs screws #12 (6mm) that are 1-¼ or 1-½ inch long… > You can also use Scotch / 3M double sided VHB or Extreme tape or Acrylic based…
IF you buy large tubs of “Super Lube with PTFE" (or any other grease) and use a syringe to dispense this for more control… then this is for you… I refill a 10ml syringe with the Super Lube grease and that helps me have better control over…
This large notepad / sticky note dispenser holds 10 x 10 cm pads (3.94 inches). Features a “More!” (reminder when you should refill it) and a "Lift edge"… so, every piece of paper will easily come out from the dispenser without getting…
This is a workbench edge protection bumper… It can be printed on solid filament or softer TPU… It can be mounted with #12 1-¼ inch screws (6mm) or Scotch / 3M VHB or Extreme tape… Like it? , please consider donating the small amount of $1…
This Swing Arm Adjustable work lamp base can be fixed to a workbench edge with the use of 3 or 4 x #12 1-¼" screws (6mm). The base is specifically made for the smaller “Adjustable work lamps” with a barrel base of ~12.3 mm (~0.48 inch)…
These are heavy duty under desk / workbench storage space brackets for Iris USA 12 x 12" Plastic Storage Boxes . However, it can fit any 3 inch tall storage boxes / trays / etc... (So, it could be 16 x 16", 14 x 14", etc…) Note: > These…
This is a coffee cup coaster to compliment Bambu Lab's X1 and X1C for those fans of the 3D printer… NOTE: > Print at 30% infill > You can print it in colors using the Bambu Studio slicer. > Add 4 x 3M/Scotch Bumpon (rubber feet) >…
This is a stand for your vinyl weeding tools and other gadgets that are a must for your Silhouette or Cricut machines… NOTE: The large hole (front right) can fit a Brayer Roller with a handle up to 1 inch thick. If you want it to last a…
This is a holder for Magigoo (50ml), Dimafix (90ml), Vision Miner Nano Polymer (50ml), Bambu Lab liquid glue (60ml) or even large glue sticks (40gr. size) in the shape of an X to compliment the X1 , P1P and X1C by Bambu Labs. However, it…
Convert any 2020 V / T slot aluminum extrusion into a spool holder with this… just print, slide it in place, add your fav. spool and done! … I have also included a spool stopper that fits the 2020 middle channel just in case… Fits any…
This filament guide plate will allow the filament to be fed to the extruder without unspooling your whole filament spool. Specially made for high speed printers such as the Bambu Lab X1, X1 Carbon and P1P… (any 200mm/s+ printer) NOTE:…
This shield protects your APC UPS from liquids, objects and other items that may fall on top of it from the workbench / table / etc. This shield works with APC Back-UPS Pro 1200 / 1300 / 1500 that have USB charge ports at the front and…
This is a tool holder in the shape of an X to compliment the X1 , P1P and X1C by Bambu Lab. It has an ergonomic design for easy handling and portability. There are holes on the side to put your smaller hex keys or other items… This model…
This is a table or workbench corner protection bumper , Standard sized for ~1 inch+ thick table / Workbench. NOTE: It can be printed on any filament or TPU… It has 6mm holes for #12 1-¼ inch screws… You can also use Scotch / 3M VHB or…
This is a “ proof of concept ” for a fictional cupcakes company called “T-Cakes” for a course I am teaching... Please, do not modify or resell or distribute my model on any other 3D model website. Again, this model is for a fictional…
These are custom-made menu buttons for the MonoPrice Mini and MALYAN M300 Delta. These make the black buttons stand out and gives them a robust look and feel. Nobody has to guess which button is left or right anymore... You can print all…
This is a VESA Laptop Mount Holder replacement tab for many brands including: PrimeCables, Walli, HumanCentric, VIVO, Desky, MonoPrice, StarTech, Mount-It! , Kensington, etc... If your laptop VESA mount looks exactly like the photo (the…
This is a stand for the Chompi Chromatic Sampler and Tape Music Instrument. It raises the Chompi up by 1.5 inches and gives it a comfortable angle. It includes large wire channels to make it easy to route the audio and power cables. NOTE:…
This is a Spool Stopper for 2020 V-slot bars... Can be used by itself or in this “ Abrasive filament dispenser” setup: https://www.printables.com/model/338258-abrasive-filament-dispenser-for-bambu-lab-x1-x1-ca You can also find the “…
This multiuse container can be used as a plant pot, pencil cup, drip tray, etc... Great for messy sprays... I use it as a drip tray for my spray bottles… Specially, the “LA's Totally Awesome” all purpose cleaner / degreaser…
This 2020 V / T slot frame is designed to dispense abrasive filament to high speed printers (ie: Bambu Lab X1, X1 Carbon, P1P, etc.) with less friction as possible. However, it works with any printer… If you like my models, please…
These feet fit the “Storage Works” 440lb cedar wood top Workbench ( Harbor Freight, Princess Auto, etc. ) It also fits a workbench with “L” shaped metal feet or workbenches that have the following dimensions: ~ 51 x 31 mm (rectangular…
To be used as anti-slip mat for the “stand for Chompi”: https://www.printables.com/model/484815-stand-for-chompi OR Used as standalone to provide better grip on the surface where your Chompi will be used. NOTES: > Print in your favorite…
Protect your 3D printing from cold air drafts **Designed originally for the MonoPrice Mini / MALYAN M300 . However, it works with Voron and other printers** So, this is a custom-made clip that fits the Neodymium magnet “name tags”…
This is a bookmark with the shape of the queen (chess). You can add a tassel if you want… Note: > Print in PLA+, Carbon Fiber or ABS > Standard settings , 20% infill… > Proto Pasta's “ Blood of My Enemies” PLA is fantastic for this…
These are all currently available results.
